Only show results available in Virginia? Ok

particulate control Applications

  • Premium

    PM2.5/PM10 particulate monitoring

    OPSIS provides real-time, flexible monitoring of particulate matter in the ambient air. Particulate matter monitoring with OPSIS, is a cost-effective solution, is ideally suited for use in modern monitoring stations. It can be remote controlled and includes automatic calibration, features that frees time.  The SM200 meets the new regulation for automatic monitoring of PM10 and PM2.5. It also meets the new regulation for particulate matter sampling on filter membranes for further analysis of cadmium, nickel, PAH and other substances.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Air pollution control solution for the particulate matter

    Regulations around the globe are becoming more and more stringent for particulate emissions. Macrotek offers some of the most efficient wet and dry technologies to meet the latest EPA, EU, and MOE standards. Often, particulate collection is combined with acid gas removal. Our most advanced wet-dry system meets and exceeds the most stringent regulations for both hazardous gases and particulate.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Premium

    Air pollution control for the paint and paint spray industry

    In addition to tightened government regulations, paint manufacturers and paint booth owners face several unique challenges when controlling their emissions. These challenges include airflow reduction, fugitive emissions, particulate control and reducing operating costs.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the food and bakery industry

    Anguil`s Food and Bakery industry experience provides reliable solutions for your emission control challenges. We have worked on a wide range of applications: achieving a high destruction level of ethanol from bakery ovens, chaff and particulate from coffee roasting, efficiently destroying grease from frying and rendering operations, handling smoke house emissions, and maintaining required opacity and odor levels from confectionery and gum manufacturing.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the ethanol/biodesel industry

    Renewable energy plants are expanding and developing at a significant rate in North America and throughout the world. In the United States, the Clean Air Act for reformulated gasoline (RFG) mandates a 2wt.% oxygen requirement, driving the demand for more production. Ethanol is the most viable additive because it is a clean-burning fuel produced from renewable, domestic biomass sources. However, the production of these fuels can result in unacceptable levels of volatile organic compounds (VOCs), carbon monoxide (CO), nitrogen oxides (NOx), particulate matter (PM) and hazardous air pollutants (HAPs), all regulated by environmental agencies.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the rubber curing industry

    One-time, on-site final destruction of particulates. This is the key benefit gained from an Anguil solution to the emissions generated by the rubber curing process. Other advantages of an Anguil solution include the elimination of visible blue haze, guaranteed destruction efficiency compliance, and the elimination of costly mechanical filtration media and the lingering liability issue associated with filter disposal.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control (APC) equipments for metal industry

    In the production of metals from ore or recycled products there are many processes where pollutants form. Smelters require high amount of energy and depending on the source of this energy and where production takes place, energy consumption can also contribute to the amount of pollution in your flue gas. In processes for metals, the metal should be purified from unwanted materials. It is inevitable that these materials as well as small amounts of the metals end up in the flue gas. Our technology is unique in its approach. It does not matter if your pollution is particulate matter, even if they are the smallest possible fraction of PM2.5, or if they are aerosols. Our patented technology handles them all. Because of the cost of production disruptions, the reliability and the high availability of our solutions provide benefits that further enhance the benefits of our technology solutions.

    By Envibat AB based in SkellefteƄ, SWEDEN.

  • Premium

    Emission control & air dedusting for fuel oil boilers

    For PM emission control in high temperature exhaust streams, such as fuel oil boilers, usual dedusters such as bag filters are very maintenance demanding. Particularly, diesel and fuel particulates are very sticky and clog to filter elements, unless protection reagents are used. Flue gas cooling is also needed in front of the filter when temperatures are higher than 200 ºC. On the other hand, regular cyclones and multicyclones are frequently not able to reduce emissions to present emission limits.

    By Advanced Cyclone Systems, S. A. based in Porto, PORTUGAL.

  • Premium

    Applications and Air Pollutants Removed in for Rendering and Food by-Product Operations.

    Particulate and odor control on emissions from dryers, cookers, presses and other processing operations. Poultry manure dryer particulate and odor control. 

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Premium

    Applications and Air Pollutants Removed in the Ceramics and Glass Industry

    Removal of particulate, acid gases and NOx emissions from glass furnaces. Particulate control on glass and ceramic material dryers and furnaces.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Premium

    Applications and Air Pollutants Removed for Mineral Products Industry

    Removal of acid gases and particulate from cement, brick and other product kilns. Mineral product dryers including coal. Hot mix asphalt plant particulate control. Sulfur dioxide and hydrochloric acid gas removal.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Premium

    Applications and Air Pollutants Removed in the Metal Mining Industry

    Complete line of wet scrubbers for all metals mining applications. Scrubbers for removal of acid gases, particulate and mists from acidulation, reaction tanks and dryers. Sulfuric acid, sulfur dioxide, ammonia and hydrogen cyanide removal. Control of micron and submicron size particulate metal fumes from rotary furnaces.   

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Premium

    Ethanol and Biofuels

    Controlling the VOCs and CO emissions produced in the feed dryers (wet and dry milling), coupled with the particulate matter being introduced and the need for the reduction of NOx are just the start of having a successful abatement solution. The challenges of smooth pressure control that reduces dryer fluctuations and plug resistant media that lessen the frequency of bake-outs are also part of a successful abatement system and we have the solutions. Our engineered oxidation systems provide reliable performance with minimal maintenance requirements. Externally accessible valve bearings and other critical components are kept out of the corrosive moisture-laden streams extending the life of the equipment and facilitate maintenance intervals. Our simple oxidizer designs control your emissions with minimal facility intervention and allow us to provide you with reliable and dependable equipment.

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

  • Premium

    Waste to Energy

    We can treat the air streams from waste management plants, MBT (Mechanical Biological Treatment) reception and composting areas, Waste Water Treatment Plants (WWTP), Refuse Derived Fuel (RDF) Plants, gasification of waste, syngas, torrefaction, gas engines and biogas upgrading. In waste management plants and WWTP, we remove the odors that may be causing a nuisance to neighbors, with bioreactors using Biomass to degrade odorous components and where odors are particularly intractable or VOC emissions higher, thermal oxidizers to meet prescribed emission limits and odor levels. In RDF Plants, Syngas, Gasification, Gas Engine and Biogas Upgrading applications, we employ thermal oxidizers, particulate removal and DeNOX systems, for the control of VOC, NOx, CO and particulates to prescribed emission limits.

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

  • Premium

    Applications and Air Pollutants Removed in the Fertilizer Industry

    Wet Scrubbers, dry collectors, wet electrostatic precipitators and complete engineered systems for urea, MAP, DAP, TSP and AN Plant rotary dryers and coolers, reactors and ammoniation granulators, pug mills, rock acidulation, curing, storage and material handling operations to control emissions of: particulate, including phosphate rock dust, ammonium phosphate, ammonia, nitric acid, NOx, phosphoric acid, hydrogen fluoride, silicon tetrafluoride, sulfuric acid, removal. Complete systems for scrubbing and recovery/reconcentration of fluorosilicic acid up to 25% concentration.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Premium

    Agitation and mixing solutions for flue gas desulfurization

    FGD (Flue Gas Desulfurization) involves the treatment of flue gas from coal fired power plants.  The main goal is to remove sulfur, particulates, and other chemicals such as mercury from the flue gas prior to environmental release.  Governmental regulations by the EPA put limits on the amount of impurities which can be released into the air.   The use of mixers to clean and scrub the flue gas is utilized to help power companies meet permitted limits on the release of controlled substances.

    By National Oilwell Varco based in Dayton, OHIO (USA).

  • Premium

    Applications and Air Pollutants Removed in the Biomass Industry

    Flue gas particulate and acid gases from biomass and bagasse boilers. Removal of ethanol, CO2 scrubbers and yeast cells from fermenters.  Removal of ash particulate, tars, acid gases and ammonia from steam reformers, gasifiers, pyrolosis units and cooling of syngas streams to acceptable limits to enable use as a fuel source for power generation or as a feedstock for chemical products. For tar removal, combination technologies can be used including oil based scrubbing solutions to reduce waste water generation. Ethanol and yeast cell removal from fermenter off-gases. Methanol from processing operations. Hydrogen sulfide removal on landfill, digester and producer gases with regenerable chemistries. Odor control for biomass storage facilities including carbon monoxide removal in wood chip storage areas. 

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Premium

    Applications and Air Pollutants Removed in the Pulp and Paper Industry

    Equipment and systems for Kraft and Sulfite mills. Control chlorine and chlorine dioxide emissions from bleaching operations. Brown stock washer emissions. Control particulate emissions from lime kilns, lime slakers, black liquor recovery boilers, furnaces and gasification units. Particulate from bark and sludge boilers and sulfur dioxide and trioxide removal from those sources. Control of hydrogen sulfide, TRS and methanol emissions from LVHC and HVLC gas streams. Complete fugitive lime dust collection systems to handle emissions from conveyors, elevators and feeders. Smelt dissolving tank particulate and TRS gases. Direct contact waste heat recovery. Black liquor evaporation. Treatment and subcooling of boiler and kiln gases to remove particulate, sulfur dioxide and TRS for precipitated calcium carbonate production (PCC). Dust from tissue and paper rollers and dryers. NASH and sodium hypochlorite scrubbing. Waste heat recovery with direct contact heat exchangers.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Premium

    Applications and Air Pollutants Removed in the Chemical, Pharmaceutical and Plastics Industries

    Supplying for over 35 years reliable air pollution control equipment and systems for removal of all gaseous compounds, particulate and odors from chemical process operations, reactors, dryers, calciners, membrane cells, pharmaceutical reactors and tablet dryers, crystallizers, vessel filling and storage vent emissions, emergency scrubbing of high concentration gas releases from cylinders, vacuum pump emissions, Quench /scrubber systems for acid gases and particulate from high temperature thermal oxidizers.  Gaseous emissions from piloting operations and research lab hoods. Specialty NOx abatement for explosives manufacturing and other process operations. Recovery and re-concentration of acids and other gaseous contaminants including by-product production.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Premium

    Applications and Air Pollutants Removed in the Food Products Industry

    Complete line of dry and wet collectors for applications requiring removal of particulate from dryers, mixers, blenders and tanks. Odor control wet chemical scrubbers with liquid or gas phase oxidation chemistries and Bioscrubber systems to control odoriferous food products, ingredients and flavor emissions from processes and dryers including fish odors. Corn acidulation and starch processing acid and ethylene oxide emissions. Remove smoke house emissions and particulate, grease and odors from meat cookers and fryers. Ethanol emissions from baking ovens. Ammonia from refrigerant evacuation. Sodium hydroxide mists from CIP cleaning of tanks and equipment. Waste heat recovery and more. 

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you