parts cleaning Applications | Environmental XPRT

Parts cleaning wastewater solution

Parts cleaning wastewater is a common application for ENCON Wastewater Evaporators. Parts cleaning is almost entirely water-based since the Montreal Protocol forced companies to abandon chlorinated fluorocarbons (CFC’s) and solvent degreasers. The wastewater is generally brownish gray and translucent with a soapy appearance. It may have trace settled solids and floating oil.

By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).

Compact Filtration for Parts Cleaning / High-pressure Cleaning

Parts cleaning in the automotive industry; In view of the growing variety, shorter delivery times and continuously rising output volumes, short cycle times ensure both manufacturers and suppliers in the automotive industry remain competitive on the international market while safeguarding high parts quality and manufacturing precision at the same time.

By GKD - Gebr. Kufferath AG based in Düren, GERMANY.

Patented Waste Water Recovery System for Heavy Machinery & Parts Cleaning

The GEOMAT systems can be designed to any specifications to fit your business needs - including maintaining and/or cleaning aviation equipment, military vehicles, golf course or farming equipment.

By GEOMAT based in Tampa, FLORIDA (USA).

Dust Collector Cartridge Filter Cleaning

The Green Filter Cleaning Machine effectively and safely cleans your air filters. The recycling of dirty cartridge filers translates into immediate ROI as filters can be reused 3-6 times, depending on application.? Ideal for cleaning dust collector filters, diesel engine intake filters, or any cartridge with an inner diameter greater than 6.5` and an outer diameter less than 20`. The Green Filter Cleaning Machine will accept filter heights up to 32` (40` extended unit available). The filter cleaning mechanism...

By Diversitech based in Montreal, QUEBEC (CANADA).

Air cleaning system for the government buildings

Dynamic Air Quality Solutions has been part of many high profile Government projects including the Securities and Exchange Commission headquarters and the anthrax clean-up effort at the Brentwood Post Office in Washington D.C. Since 2005, Dynamic Air Cleaners have been installed in over 200 government projects in the U.S. and Canada, including state & local and military sectors.

By Dynamic Air Quality Solutions based in Princeton, NEW JERSEY (USA).

Smoke generator device for clean room solutions

The correct functioning of HEPA filters is normally tested at the time of installation, as well as part of the routine maintenance programme. It is normally recommended that HEPA filters are checked at 14 month intervals or less, or immediately after filter changing. Where high efficiency filters are fitted, it is vital that the filter housing/sealing device does not allow particulate material to pass and thereby compromise the clean room environment that is being served. Testing is necessary since HEPA filters...

By Concept Smoke Systems based in Maidenhead, UNITED KINGDOM.

Premium

Tunnel solutions for the visibility monitor

The TunnelTech 101 Visibility Monitor (VIS), is an essential part of any road or rail tunnel safety system. It monitors the Visibility within the tunnel and ensures that the tunnel ventilation system provides sufficient clean air for drivers to clearly see the road ahead. The TunnelTech 102 Cold smoke monitor (CSM detects smoke from a fire to rapidly warn the operator of the hazard. Secondly, used in combination with other TunnelTech 101 VIS monitors, the operator can quickly detect the locus of the fire if it...

By Codel International Ltd based in Bakewell, UNITED KINGDOM.

Premium

Industrial wastewater solutions for the used rinse water

Cleanliness is the most important success factor when cleaning parts and surfaces. As it depends heavily on the quality of the rinse water used, looking after the individual rinses requires particular attention. Leading companies are already using vacuum distillation systems to treat used rinse water. And you too can benefit, because our VACUDEST vacuum distillation systems enables you to achieve top cleaning quality.

By H2O GmbH based in Steinen, GERMANY.

Premium

Industrial wastewater solutions for crack detection wastewater

Tracking the tiniest cracks – with H2O wastewater treatment. Heavy use, material fatigue and material faults can cause tiny cracks in plastic and metal parts. These are so small that they are invisible to the naked eye. But they can still be relevant to safety, e.g. on the wings of passenger jets. That’s why these parts are regularly checked for micro cracks. One way of doing this is the dye penetration process, where the part to be checked is first thoroughly cleaned. Applying a special dye and...

By H2O GmbH based in Steinen, GERMANY.

Premium

Visual inspection solutions for the duct HVAC camera

Duct (HVAC) cleaning is an important part of maintaining good air quality in any building, if ducts are not being cleaned properly, air polluted by dust and other fine particles that can be harmful, will be circulated throughout the system. The best way to ensure ducts are being cleaned completely is to visually inspect them, this can now be accomplished using HVAC inspection cameras. These CCTV cameras are composed of a digital inspection camera attached to a push rod to enable the camera to access all parts...

By Medit Inc. based in Winnipeg, MANITOBA (CANADA).

Industrail Filtration

Automotive Paints, Coating, Inks, Dispersions Water and Water Treatment Solvents Lubricants, Metalworking Fluids Parts Cleaning Solutions Pulp and Paper Pharmaceutical Food Processing Chemical Processing Edible Oils Potable Water, Beer, Wine

By Shanghai Future Filtration Equipment Co., Ltd based in Shanghai, CHINA.

ALL PURPOSE CLEANER

Bio Rem's 'Nature Way' All Purpose Industrial Cleaner Biodegrades waste while it cleans. Safe for all surfaces. Cleans... For small surfaces spray a small amount on glass, appliance, counters or surface area, wipe clean. Cleans... Ovens, parts & equipment, and cars... just to name a few.

By BIO REM USA based in Broadview Heights, OHIO (USA).

Oil on Metals Analysis

Got oil on metal? Need to test parts for oil residue to ensure the parts are clean and oil free? Sitelab's analyzers are easy to use or send samples to Sitelab for laboratory analysis. Samples are extracted in solvent using test kits available. Wipe samples can also be tested.

By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

Equipment decontamination/industrial maintenance solutions

Existing hydrocarbon contamination, leaks, and spills can be a time-consuming maintenance problem or a major health, safety, and environmental hazard. Fuel storage tanks, pumping stations, equipment areas, and maintenance bays always need cleaning. Use iSorb as part of an industrial maintenance program, after spill cleanup, and for decontamination of equipment at remediation sites. iSorb’s wide range of viscosities means it can be applied with a simple sprayer or painted onto sloping and vertical surfaces....

By Beyond Environmental based in Geneva, ILLINOIS (USA).

Hazardous and Special Wastes

Gasplasma® uses a DC Plasma Converter to crack impurities from the raw syngas. The intense heat and strong UV light produced by the Plasma Arc neutralises hazardous wastes, such as sludge and oils, creosote and other preservatives and chemicals. Gasplasma® transforms the organic parts of the waste into a hydrogen-rich syngas that is used to generate clean, renewable power and renewable heat. The second stage Plasma Converter makes hazardous elements inert and all the inorganic materials are vitrified into an...

By Advanced Plasma Power (APP) based in Swindon, UNITED KINGDOM.

Chemical Oxygen Demand (COD) Analyzer for Craft Brewers

MANTECH’s innovative PeCOD Analyzer is helping Ontario’s craft brewers manage their wastewater more effectively. PeCOD is an integral part of the Brü Clean System, a specialized wastewater treatment process developed by Econse Water Purification Systems for the craft brewing industry. Together they helped reduce the amount of wastewater for treatment by 75 per cent. “We can accomplish in a few minutes what other companies take weeks or months to do and this lets us move straight to...

By MANTECH Inc. based in Guelph, ONTARIO (CANADA).

Wastewater Treatment for Manufacturing

B & V Effluent Services have been helping the manufacturing industry with its waste water management for a number of years. This has allowed B & V Effluent Services to develop a specific skill set and technical knowledge to help us provide excellent solutions to a number of blue chip company’s within the manufacturing industry. Modern manufacturing production systems have been developed to use cleaning water more efficiently however this water for a variety of reasons brings about a series of challenges when...

By B & V Water Treatment based in Daventry, UNITED KINGDOM.

Water Treatment for Personal Care / Water Treatment for Cosmetics

B & V Effluent Services has been helping the cosmetics and personal care industry with their waste water management for a number of years. This has allowed B & V Effluent Services to develop a specific skill set and technical knowledge to help us provide excellent solutions to a number of blue chip companies within this industry. Modern manufacturing production systems have been developed to use cleaning water more efficiently however this water for a variety of reasons brings about a series of challenges when...

By B & V Water Treatment based in Daventry, UNITED KINGDOM.

LifeFilta R20 Container & LifeFilta TapFilta for rural areas

Many villages have no access to clean drinking water. Many still depend on wells, rivers and streams as their source of drinking water. To give water is to give life. Clean water can cut a community’s child mortality rate in half. It gives parents a powerful way to improve the health, hygiene, and the well-being of their children. The R20 Jerry Can would also be suitable for workers living in remote areas to obtain safe drinking water. The R20 can be filled with water from any source; river, lake, pond or stream...

By LifeFilta based in Tongeren, BELGIUM.

LifeFilta R20 Container & LifeFilta TapFilta for travelling

The greatest health risk from drinking water for travelers is associated with microbial contamination. Numerous infectious diseases can be transmitted by drinking contaminated water. Diarrhea is the most common symptom of waterborne infection, affecting 20–50% of all travelers or about 10 million people per year. In localities where the quality of potable water, sanitation and food hygiene practices are questionable, the numbers of parasites, bacteria and viruses in water and food can be substantial, and numerous...

By LifeFilta based in Tongeren, BELGIUM.

Subscribe to our eBulletins

Add Supplier Profile