Only show results in Texas? Ok

parts cleaning Applications

  • Parts cleaning wastewater solution

    Parts cleaning wastewater is a common application for ENCON Wastewater Evaporators. Parts cleaning is almost entirely water-based since the Montreal Protocol forced companies to abandon chlorinated fluorocarbons (CFC’s) and solvent degreasers. The wastewater is generally brownish gray and translucent with a soapy appearance. It may have trace settled solids and floating oil.

    By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).

  • Compact Filtration for Parts Cleaning / High-pressure Cleaning

    Parts cleaning in the automotive industry; In view of the growing variety, shorter delivery times and continuously rising output volumes, short cycle times ensure both manufacturers and suppliers in the automotive industry remain competitive on the international market while safeguarding high parts quality and manufacturing precision at the same time.

    By GKD - Gebr. Kufferath AG based in Düren, GERMANY.

  • Cleaners for Parts cleaning industry

    We understand how critical it is to get the industrial cleaning done so your plant can continue operating at peak efficiency. Our cleaners remove dirt, grease, oil, metal fines, flux, and other particulates from parts and equipment without the hazards associated with solvents. When rinsed properly our cleaners leave no residue and your precision parts are ready for further processing. Products are available for manual and automated cleaning systems. only qualitative production for all transportAn economical 1-2%...

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Patented Waste Water Recovery System for Heavy Machinery & Parts Cleaning

    The GEOMAT systems can be designed to any specifications to fit your business needs - including maintaining and/or cleaning aviation equipment, military vehicles, golf course or farming equipment.

    By GEOMAT based in Tampa, FLORIDA (USA).

  • Premium

    Dust Collector Cartridge Filter Cleaning

    The Green Filter Cleaning Machine effectively and safely cleans your air filters. The recycling of dirty cartridge filers translates into immediate ROI as filters can be reused 3-6 times, depending on application.? Ideal for cleaning dust collector filters, diesel engine intake filters, or any cartridge with an inner diameter greater than 6.5` and an outer diameter less than 20`. The Green Filter Cleaning Machine will accept filter heights up to 32` (40` extended unit available). The filter cleaning mechanism...

    By Diversitech based in Montreal, QUEBEC (CANADA).

  • Air cleaning system for the government buildings

    Dynamic Air Quality Solutions has been part of many high profile Government projects including the Securities and Exchange Commission headquarters and the anthrax clean-up effort at the Brentwood Post Office in Washington D.C. Since 2005, Dynamic Air Cleaners have been installed in over 200 government projects in the U.S. and Canada, including state & local and military sectors.

    By Dynamic Air Quality Solutions based in Princeton, NEW JERSEY (USA).

  • Smoke generator device for clean room solutions

    The correct functioning of HEPA filters is normally tested at the time of installation, as well as part of the routine maintenance programme. It is normally recommended that HEPA filters are checked at 14 month intervals or less, or immediately after filter changing. Where high efficiency filters are fitted, it is vital that the filter housing/sealing device does not allow particulate material to pass and thereby compromise the clean room environment that is being served. Testing is necessary since HEPA filters...

    By Concept Smoke Systems based in Maidenhead, UNITED KINGDOM.

  • Premium

    Tunnel solutions for the visibility monitor

    The TunnelTech 101 Visibility Monitor (VIS), is an essential part of any road or rail tunnel safety system. It monitors the Visibility within the tunnel and ensures that the tunnel ventilation system provides sufficient clean air for drivers to clearly see the road ahead. The TunnelTech 102 Cold smoke monitor (CSM detects smoke from a fire to rapidly warn the operator of the hazard. Secondly, used in combination with other TunnelTech 101 VIS monitors, the operator can quickly detect the locus of the fire if it is...

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Premium

    Industrial wastewater solutions for the used rinse water

    Cleanliness is the most important success factor when cleaning parts and surfaces. As it depends heavily on the quality of the rinse water used, looking after the individual rinses requires particular attention. Leading companies are already using vacuum distillation systems to treat used rinse water. And you too can benefit, because our VACUDEST vacuum distillation systems enables you to achieve top cleaning quality.

    By H2O GmbH based in Steinen, GERMANY.

  • Premium

    Industrial wastewater solutions for crack detection wastewater

    Tracking the tiniest cracks – with H2O wastewater treatment. Heavy use, material fatigue and material faults can cause tiny cracks in plastic and metal parts. These are so small that they are invisible to the naked eye. But they can still be relevant to safety, e.g. on the wings of passenger jets. That’s why these parts are regularly checked for micro cracks. One way of doing this is the dye penetration process, where the part to be checked is first thoroughly cleaned. Applying a special dye and using...

    By H2O GmbH based in Steinen, GERMANY.

  • Premium

    Visual inspection solutions for the duct HVAC camera

    Duct (HVAC) cleaning is an important part of maintaining good air quality in any building, if ducts are not being cleaned properly, air polluted by dust and other fine particles that can be harmful, will be circulated throughout the system. The best way to ensure ducts are being cleaned completely is to visually inspect them, this can now be accomplished using HVAC inspection cameras. These CCTV cameras are composed of a digital inspection camera attached to a push rod to enable the camera to access all parts of...

    By Medit Inc. based in Winnipeg, MANITOBA (CANADA).

  • Industrail Filtration

    Automotive Paints, Coating, Inks, Dispersions Water and Water Treatment Solvents Lubricants, Metalworking Fluids Parts Cleaning Solutions Pulp and Paper Pharmaceutical Food Processing Chemical Processing Edible Oils Potable Water, Beer, Wine

  • ALL PURPOSE CLEANER

    Bio Rem's 'Nature Way' All Purpose Industrial Cleaner Biodegrades waste while it cleans. Safe for all surfaces. Cleans... For small surfaces spray a small amount on glass, appliance, counters or surface area, wipe clean. Cleans... Ovens, parts & equipment, and cars... just to name a few.

    By BIO REM USA based in Broadview Heights, OHIO (USA).

  • Oil on Metals Analysis

    Got oil on metal? Need to test parts for oil residue to ensure the parts are clean and oil free? Sitelab's analyzers are easy to use or send samples to Sitelab for laboratory analysis. Samples are extracted in solvent using test kits available. Wipe samples can also be tested.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Cleaners for industrial Manufacturing industry

    We understand how critical it is to get the industrial cleaning done so your plant can continue operating at peak efficiency. Our cleaners remove dirt, grease, oil, metal fines, flux, and other particulates from stamped metal, parts and equipment without the hazards associated with solvents. Our cleaners are also proven in removing soils from filter membranes used in wastewater treatment systems.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Equipment decontamination/industrial maintenance solutions

    Existing hydrocarbon contamination, leaks, and spills can be a time-consuming maintenance problem or a major health, safety, and environmental hazard. Fuel storage tanks, pumping stations, equipment areas, and maintenance bays always need cleaning. Use iSorb as part of an industrial maintenance program, after spill cleanup, and for decontamination of equipment at remediation sites. iSorb’s wide range of viscosities means it can be applied with a simple sprayer or painted onto sloping and vertical surfaces....

    By Beyond Environmental based in Geneva, ILLINOIS (USA).

  • Hazardous and Special Wastes

    Gasplasma® uses a DC Plasma Converter to crack impurities from the raw syngas. The intense heat and strong UV light produced by the Plasma Arc neutralises hazardous wastes, such as sludge and oils, creosote and other preservatives and chemicals. Gasplasma® transforms the organic parts of the waste into a hydrogen-rich syngas that is used to generate clean, renewable power and renewable heat. The second stage Plasma Converter makes hazardous elements inert and all the inorganic materials are vitrified into an...

    By Advanced Plasma Power (APP) based in Swindon, UNITED KINGDOM.

  • Cleaners for Metalworking industry

    Effective cleaning of machined or formed parts is a key step in all manufacturing processes. At IPC, we understand for a surface to be successfully plated or painted, it must first be free of contaminants. Our cleaners remove dirt, cutting oil, metal fines, flux, and other particulates from stamped metal and precision parts without the hazards associated with solvents. An economical 1-2% concentration in water is effective for most cleaning applications. Our cleaners are also proven in removing soils from filter...

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Chemical Oxygen Demand (COD) Analyzer for Craft Brewers

    MANTECH’s innovative PeCOD Analyzer is helping Ontario’s craft brewers manage their wastewater more effectively. PeCOD is an integral part of the Brü Clean System, a specialized wastewater treatment process developed by Econse Water Purification Systems for the craft brewing industry. Together they helped reduce the amount of wastewater for treatment by 75 per cent. “We can accomplish in a few minutes what other companies take weeks or months to do and this lets us move straight to effective...

    By MANTECH Inc. based in Guelph, ONTARIO (CANADA).

  • Wastewater Treatment for Manufacturing

    B & V Effluent Services have been helping the manufacturing industry with its waste water management for a number of years. This has allowed B & V Effluent Services to develop a specific skill set and technical knowledge to help us provide excellent solutions to a number of blue chip company’s within the manufacturing industry. Modern manufacturing production systems have been developed to use cleaning water more efficiently however this water for a variety of reasons brings about a series of challenges when...

    By B & V Water Treatment based in Daventry, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you