When concrete is contaminated with PCBs, radiation or other hazards, scabbling is often the only means of remediation. By removing a thin outer layer from a concrete surface, our shrouded power tools can make a structure safer for occupancy or demolition. Our powerful VAC-PAC® HEPA vacuum captures all dust, debris, and air-borne contaminants for easy transportation and disposal in standard 55-gallon (200L) drums. Whether you’re applying a new coating system or a concrete overlay, a Concrete Surface Profile number (CSP 1-9) is often specified according to ICRI’s Technical Guideline No 310.2R. The examples below illustrate how Pentek tools can achieve your requirements:
By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).
Removal of total spectrum of non-polar and polar hydrocarbons proven in practice: MPPE removes toxic, non-polar, non biodegradable compounds, aromatics, poly aromatics, halogenated, chlorinated, PCBs, THT (TetraHydroTiophene), Dioxins, CS2 etc. Folowed by biotreatment removing polar biodegradable compounds. Optional: UF and/or activated carbon filtration and RO for reuse as process or boiler feed water.
By Veolia Water Technologies Techno Center Netherlands B.V. - MPP Systems based in Ede, NETHERLANDS.
Soldering fumes are Unbreathable. Soldering enables the joining of metal parts by melting a filler metal to attach wires and other metallic components. The fumes generated from melting solder especially solder containing Lead or Tin present are dangerous and require local ventilation to remove harmful smoke from the work area. Soldering application need to be properly ventilated to prevent toxic fumes from reaching the worker`s breathing zone. There are a number of different industries such as the electronics assembly industry and electronics repair comapnies who must deal with the hazards of solder smoke. Fumes created by automated PCB soldering including wave soldering machines, handheld soldering irons, torch brazing and furnance brazing are often ignored because of the small volume of smoke generated. However, these applications still require careful consideration as dangerous fumes can impair employee’s respiratory tracts depending on the filler metals used. Because manual soldering applications require working with tiny components, workers end up positioning their heads right above toxic rosin or lead solder fumes with a direct exposure into their throat, nasal passages and lungs, and as a result, they can experience respiratory complications. Rosin irritation can cause various side effects and the inhalation of lead fumes is carcinogenic. As lead oxide smoke collects in your lungs, it can be transferred into your bloodstream. Diversitech recommends installing soldering fume extraction equipment to prevent the inhalation of dangerous fumes. These ventilation units will not only protect each person working at a soldering station when installed and positioned correctly, but they will also prevent fumes from contaminating other worker’s lungs.?
By DiversiTech Inc based in Montreal, QUEBEC (CANADA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you