Only show results available in Virginia? Ok

pet material Applications

  • Premium

    Recycling Systems for the recovery of secondary materials

    The recovery and reclamation of recyclable materials in the waste stream is possible through various selection and separation processes.In the case of materials such as PP, PET, HDPE, plastic, paper, aluminium etc. can be put back into circulation creating new raw materials, the so called “secondary” raw materials, produced not by nature but by man.

    By Macpresse Europa S.R.L based in Vernate, ITALY.

  • Premium

    Pre-sorted Material Sorting

    TOMRA can help you sort the value out of Pre-sorted material. The input material of pre-sorted plastics will usually contain materials such as bottles and foil. Before recycling, any impurities need to be cleaned out in order to sort out any residue of organic matter, metals, PVC or coloured PET. The material is checked for colour and material. In the bottle-to-bottle procedures highest and consistent quality standards are required.

    By TOMRA Sorting (TITECH) based in Mülheim-Kärlich, GERMANY.

  • Premium

    Removal of Non-Ferrous Metals in the Recycling Industry

    Non magnetic metals such aluminum + copper can be separated using eriez eddy current separators or meta sorters. Eriez equipment, either as individual units or complete systems, is designed for efficient + economical processing of municipal solid waste, co-mingled recyclables, shredded automobiles, Electronic Scrap, Glass Cullet, Plastic (PET), foundry sand and many other resource recovery options.

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM.

  • Premium

    Shredding and crushing systems for crushing bottles

    Mercodor crushing plants for crushing bottles are widely used. Firstly you contribute to reducing the volume of waste, but you also make a major contribution by economically crushing glass and PET bottles.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Premium

    Removal of Ferrous Metals in the Recycling Industry

    Carbon steel metal can be separated from non-recyclables using Eriez magnetic separators.

    Eriez equipment, either as individual units or complete systems, is designed for efficient and economical processing of municipal solid waste, co-mingled recyclables, shredded automobiles, Electronic Scrap, Glass Cullet, Plastic (PET), foundry sand and many other resource recovery options.

    From permanent magnets to scrap drums and magnetic drums to metal detection for further material purity and feeding equipment, Eriez recycling team assists recycled material processors, material recycling facilities alike in improving product quality and recovering valuable commodity. 

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM.

  • Binding device for plastic recyclers

    We offer balers with great compression force and an additional binding device for cross-binding. It can bale PET packaging of up to 110 x 77 x 120–150 cm in size and weighing 400–500 kg. It will enable the loading of more than 22 tons into a 40`` container.

    By Anis Trend, d.o.o., based in Loški Potok, SLOVENIA.

  • Premium

    Geotextiles solutions for pipeline construction areas

    The world registers less than 3.5 million kms of pipelines in 120 countries. Pipelines conveying flammable or explosive material, such as natural gas or oil, pose special safety concerns. To avoid pipeline instability and damage caused by differential settlements, TenCate Geosynthetics EMEA offers you the optimum solution from its wide range of reinforcement geosynthetics: TenCate Geolon PET & PP, TenCate Miragrid GX & TenCate Rock PEC ranges.

    By TenCate Geosynthetics Netherlands bv based in AE in Nijverdal, NETHERLANDS.

  • Continuous process waste plastic to oil recycling

    continuous waste plastic to oil Solution: Continuous pyrolysis plant Function: Recycling waste plastic to fuel oil Applicable raw material: ABS / Mixed plastic, PE/PP/PS Plastic, PET Plastic not recommended Output: 50-90% fuel oil ,10-50% carbon blakc Heating fuel: Coal / wood/ fuel oil / gas Pyrolysis plant land size: 25x20m Reactor design: Mutiple reactors with internal rotating Reactor material: Q245/ Q345 Boiler plate

  • Premium

    Waste Compaction for the Manufacturing Industry

    HSM has a wide range of balers for use in industrial and manufacturing settings. Many materials including, cardboard, paper, plastic packaging, PET Bottles/other rigid plastics and drinks cans can be successfully baled using one of HSM’s high specification balers.

    All of the models within HSM`s range of industrial balers are used for baling recovered recyclable materials into bales suitable for transporting to a recycling facility for processing. HSM balers for use in industrial or manufacturing settings are designed to allow maximum flexibility of working for the operator in that they can function on their own or as an integral part of a wider recovery system.

    Whether it’s a vertical, horizontal or fully automatic, channel baler that is required, HSM has a range of solutions for every location, and able to fit in to the available space.

    By HSM GmbH + Co. KG based in Frickingen, GERMANY.

  • Premium

    Waste Compaction for the Cardboard & Paper Recycling Industry

    Cardboard is by volume one of the most commonly recovered recyclables. HSM provides balers for use with cardboard in many different scenarios from small volumes, with the aim of creating a tidy, efficient work area is the main aim through to demanding, high volume situations where a baler which can deal easily with throughputs of many bales per hour is required.

    Our new generation of modern balers have been created to use low levels of energy, generate a minimum level of noise and operate without the need for constant supervision.

    HSM has a wide range of balers for use in industrial and manufacturing settings. Many materials including, cardboard, paper, plastic packaging, PET Bottles/other rigid plastics and drinks cans can be successfully baled using one of HSM’s high specification balers.

    By HSM GmbH + Co. KG based in Frickingen, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you