Only show results in Virginia? Ok

pharmaceutical industry wastewater Applications

  • Premium

    Wastewater treatment for the chemical and pharmaceutical industry

    Presence of colouring, additives, nonbiodegradable organic contents or presence of biological process inhibitors. Besides, they are highly corrosive which is why we manufacture our equipments using materials especially adapted to the working conditions. An effluent containing a great quantity of suspended and dissolved organic material.

    By Toro Equipment S.L. based in La Cistérniga, SPAIN.

  • Wastewater treatment for the chemical and pharmaceutical industry

    The water from pharmaceutical companies can cause big troubles because of the high variability in their manufacturing processes. Depending on the kind of raw materials used, the effluents may even be toxic, hence why the most conflictive effluents have to be separated from the rest and not to be sent to the general treatment.

    By Aguambiente based in La Cistérniga, SPAIN.

  • Industrial Wastewater Treatment

    Sludge Pressing, Thickening, dewatering and Solid-liquid Separation.

  • Premium

    Wastewater Treatment Management for Pharmaceutical Industry

    Pharmaceutical companies today are operating in a challenging environment. Pharmaceutical wastewater treatment management is increasingly becoming critical to the entire operations of a pharmaceutical manufacturer. These companies are facing challenges of water scarcity requiring them to look more closely at employing pharmaceutical wastewater reuse strategies for cost management. In addition, companies in this industry are faced with tighter regulatory water discharge limits.

    By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).

  • Water treatment for the pharmaceutical industry

    The pharmaceutical market is at the center of personal care, serving to protect public health and improve the quality and span of life. This global market requires treatment technologies to disinfect, measure, control and filter process water and wastewater generated from production.

    By De Nora Water Technologies based in Colmar, PENNSYLVANIA (USA).

  • Wastewater treatment for the cosmetics industry

    The cosmetics industry accrues many kinds of wastewater. The challenge for wastewater treatment is that product lots are often changing, thus changing the composition of the wastewater. Switching to a new product lot in particular, produces large amounts of wastewater that are contaminated by surfactants, dye, oils and emulsions and high COD concentrations. In addition, wastewaters foam excessively at times.

    By DAS Environmental Expert GmbH based in Dresden, GERMANY.

  • Premium

    Solutions for the chemical industry

    Many organizations in the industrial sector are investigating possibilities to improve their (sustainable) energy profile. The renewable energy sector currently offers a broad scale of options with significant capacity for growth and new projects and expanding upon existing infrastructures. In the industrial sector, biogas can replace the current natural gas consumption. DMT has extensive experience within various industries and knows her way around. For more than 28 years we have been advising our customers on reducing CO₂ and SOx emissions, wastewater treatment and (bio)gas desulphurisation and upgrading.

    By DMT Global Environmental Solutions BV based in Joure (NL), NETHERLANDS.

  • Premium

    Industrial solutions for chemical and petroleum industry

    With expertise in water and wastewater treatment, oil/water separation, liquid/liquid and liquid/solids separation, WesTech works closely with professionals in the petroleum and chemical industries. We are able to move fast to provide proven solutions and process infrastructure that keep production up and product flowing.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Water treatment systems for chemical industry

    The effluents that accrue in the cleaning process of silo vehicles and containers for transportation of raw materials for the chemical industry, are highly complex and constantly changing in the composition of wastewater. Flocculation as the prior art of treatment for chemical waste water can not remove many of the completely dissolved invisible substances. Thus, the residual stresses are evident despite high claritv of the `Treated effluent` is often well above the levels witch are applicable for wastewater in domestic environments.

    By Weidner Ireland Ltd based in IRELAND.

  • Premium

    Water quality monitoring for chemical industry

    Chemical plants that produce high quantities of phenols (plastics, pesticides and pharmaceutical industries) and other aromatic organic compounds are excellent candidates for wastewater characterization via spectral analysis. Chemicals that contain conjugated double bonds absorb UV radiation remarkably well. The benefits include higher precision in process control as well as optimization of wastewater treatment.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Premium

    Specialty Cleaners and Lubricants for Filter Membrane Industry

    International Products Corporation has been selling cleaners to the filter membrane industry for over 30 years. Our proprietary formulated cleaners work effectively at restoring 100% flux at safe pH ranges.  We have a wide variety of chemistries available for all membranes and soils and an on-site R&D laboratory that offers technical support and assistance.  All of our cleaners are free of solvents, phosphates, silicates, phenols, and Substances of Very High Concern.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Premium

    ppm Measurement of Oil in Water for the Petrochemical Industry

    Measuring the oil content in water or soil is a specialty of Wilks Enterprise. InfraCal TOG/TPH Analyzers provide on-site ppm measurements to help ensure upstream or downstream wastewater complies with discharge permits to avoid potentially costly fines. There are over 3,000 InfraCal TOG/TPH Analyzers in operation today around the world measuring the oil and grease levels in produced water on drilling platforms, oil content in FRAC water, hydrocarbons in wastewater effluents from refineries, and TPH in soil at remediation sites.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Water treatment research for refining and petrochemicals industry

    Refining processes like distillation use high quality steam that must be generated from ultrapure water. Advanced wastewater treatment technologies will help the industry meet tough regulations concerning hazardous waste products from process operations. As the industry expands into water-scarce areas in India, China and the Middle East, marginal sources can help meet the demand for water. Desalination and reuse technologies will secure a reliable source of water and help the industry manage its water impact. Water technology suppliers have the opportunity to tap into a market worth $768 billion.

    By Global Water Intelligence (GWI) based in Oxford, UNITED KINGDOM.

  • Premium

    Water Treatment Equipments for Petrochemical Industry

    The petrochemical industry is a process intensive industry which utilizes relatively large quantities of water in its refining operations. This industry involves the processing of chemicals derived from petroleum and natural gas that are used for a variety of chemical purposes. The wastewater generated by this industry has created many petrochemical wastewater treatment challenges.

    By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).

  • Filtration systems & solutions for wastewater treatment industry

    The removal of contaminants from untreated water has become a leading issue, due to environmental concerns and the threat of future water shortage. An effective purification process is necessary to eliminate organic, chemical or other debris to meet stringent regulations for drinking water, as well as for the chemical, industrial, pharmaceutical and science markets.

    By Porvair Filtration Group based in Fareham, UNITED KINGDOM.

  • Premium

    Industrial solutions for ultrapure water monitoring

    Problem: Trace contamination in ultrapure water (UPW) can have detrimental effects on a manufacturing process in Semiconductor, Power Generation and Pharmaceutical industries. Onsite treatment is conducted to further remove trace impurities from source water.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Industrial and commercial water filtration for process water

    Filtration for Process Water is a widely used term and has a great number of uses dependent on the operation. Filtration for process water or water purification is a process where any undesirable contaminants are removed from the water to ensure it’s suitable for its intended use. The filtrat0ion of process water does not always have to be for drinking water for humans but can also refer to water purification for the use of industrial or commercial applications in a variety of industries include pharmaceutical, chemical, Paper and Textiles, Steel,  Food and Beverage, Plastics, Automotive and many more.

    By Hydro-Gen Engineering Ltd based in Widnes, UNITED KINGDOM.

  • Premium

    Activated Carbon Filtration for the Water Filtration Industry

    General Carbon carries a complete line of activated carbon made from coal, coconut shell and wood for most liquid phase applications.  These include acid washed activated carbon for drinking water and food grade applications as well as products suitable for waste water remediation, decolorization applications, chemical and pharmaceutical purification. Additionally, our specialty medias are best for the treatment of non-emulsified oils and heavy metals. Our stock of activated carbon for liquid phase applications are all NSF certified, meaning that they are approved for treatment of food grade applications.


    By General Carbon Corp. based in Paterson, NEW JERSEY (USA).

  • Premium

    Wastewater Treatment

    Many industrial and pharmaceutical processes generate wastewater with volatile contaminants that increase the COD and BOD to a point where discharging to municipal wastewater is very costly or not an option. These contaminants can be removed from the water by distillation, substantially lowering the disposal cost, and, in many cases, the removed components can be further purified and reused in the process. MEGTEC offers the following solutions to remove the volatile contaminants and make wastewater suitable for discharge to most municipal wastewater treatment plants: Stripping columns using direct steam or a reboiler Distillation columns using indirect steam heat sources Our technologies have been applied to a range of processes including wastewater treatment from industries such as Pharmaceutical, Semiconductor, Chemical and Petrochemical.

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you