Only show results available in Virginia? Ok

pharmaceutical pollution Applications

  • Premium

    Air pollution control for the pharmaceutical industry

    From pill coating and mixing operations to Ethylene Oxide (ETO) sterilization, Anguil has had great success solving a wide range of emission control applications in the pharmaceutical industry. As companies struggle to comply with the EPA`s MACT (Maximum Achievable Control Technology) standards or international regulations, it is comforting to know that Anguil thoroughly understands your process. Over three decades of experience treating halogenated, VOC and HAP process streams enable us to efficiently solve your pollution control problems.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Industrial air pollution control for the pharmaceutical industry

    The pharmaceutical industry is one of the most important and growing industries worldwide. Personal well-being is becoming ever more important, and the accelerating ageing effect consequently gives rise to increased expenditure on pharmaceuticals and medicine. CTP air pollution control systems not only focus on pharmaceuticals and generics, but also on applications in medical supplies, ranging from bandages and associated materials to medical and plastic implants.

  • Air pollution control (APC) equipments for pharmaceutical industry

    The pharmaceutical industry worldwide is facing a major challenge. The productions of desired chemicals leaves an amount of by-products, some of them dangerous to both humans and the environment. An incinerator is usually used to deal with the challenge to reduce the volumes of hazardous substances. This process, however, creates sub-micron particles that conventional filter technology cannot handle. By using EnviBAT’s technology for gas cleaning – the best in the industry – such issues can be greatly reduced.

    By Envibat AB based in Skellefteå, SWEDEN.

  • Premium

    Water Treatment solutions for removal of micro-pollution

    Using powder activated carbon to effectively adsorb man-made trace substances. ProMinent also provides cost-effective solutions for challenging jobs in municipal waste water treatment: micro-pollutants are effectively removed by a complete system for accurately metering powder active carbon.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY.

  • Applications and Air Pollutants Removed in the Chemical, Pharmaceutical and Plastics Industries

    Supplying for over 35 years reliable air pollution control equipment and systems for removal of all gaseous compounds, particulate and odors from chemical process operations, reactors, dryers, calciners, membrane cells, pharmaceutical reactors and tablet dryers, crystallizers, vessel filling and storage vent emissions, emergency scrubbing of high concentration gas releases from cylinders, vacuum pump emissions, Quench /scrubber systems for acid gases and particulate from high temperature thermal oxidizers.  Gaseous emissions from piloting operations and research lab hoods. Specialty NOx abatement for explosives manufacturing and other process operations. Recovery and re-concentration of acids and other gaseous contaminants including by-product production.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Premium

    Air pollution control for the pharmaceutical industry

    Companies that develop or produce drugs for use as medications – commonly use catalytic oxidizers for air pollution control needs .

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Premium

    Air pollution control for the chemical industry

    Companies that produce industrial chemicals converting raw materials into different products – commonly use thermal oxidizers for air pollution control needs.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Premium

    Air pollution control for the petroleum processing and petrochemical industries

    The petroleum processing and petrochemical industries place a large emphasis on engineering quality, safety and reliabiliy. With our extensive experience on various processes in these industries, Anguil is the perfect partner to meet these concerns.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the chemical processing industry

    Anguil thermal and catalytic oxidizer systems are used on various applications throughout the chemical processing industry for emission abatement. Our experience includes applications on tank vents, amine tail gases, API separators, acid gases, inert streams and more. Regulatory Compliance Guaranteed, Seamless Process Integration, Efficient Destruction Technologies, Advanced System Controls.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Chemical and Pharmaceutical Solutions

    The application of VOC emission control equipment for the chemical and pharmaceutical industries requires a thorough knowledge and understanding of the customer's process and requirements, and having the ability to offer custom solutions. MEGTEC has years of experience in finding solutions to support the chemical industries worldwide. with our range of solutions including scrubbers and wet electrostatic precipitators, carbon adsorption systems for solvent recovery, distillation and purification equipment, and thermal oxidation systems.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Industrial air pollution control for the chemical and petrochemical industry

    CTP systems can be found in every leading production company: thanks to the experience and the expertise developed in partnership with our customers for processes with inconsistent waste gas volumes; varying concentrations of organic components; gases contaminated with aerosols. CTP has installed systems for waste gas streams ranging from 1,000 to 200,000 Nm³/h. CTP supplies this industry with mainly catalytic systems, regenerative thermal oxidisers (RTO) and adsorbers. As the flue gases in this industry are often explosive mixtures, CTP systems have to be completed with special safety conduits and filters to help reduce hazards during continued operation.

  • Premium

    Air pollution control for the petrochemical & gas production industry

    Companies working with chemical products derived from petroleum – commonly use incinerators for air pollution control needs.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Applications and Air Pollutants Removed in the Petroleum/Petrochemical Industry

    Scrubbing of Hydrogen sulfide, mercaptans and other organosulfur compounds from sour gas and other sources. Proprietary regenerative scrubbing chemistries for hydrogen sulfide removal with sulfur production. By-product production systems for producing sodium hydrosulfide (Nash) from hydrogen sulfide. Sulfur dioxide scrubbing. Recover catalyst dust from FCC units. HCL storage tank vent scrubbing. Removal of HCL and particulate from thermal oxidizers burning chlorinated plastics. Marine drilling platforms sulfur dioxide thermal oxidizer emissions.  Asphalt plant scrubbers and hydrogen sulfide emissions from holding tanks. Pilot plant scrubber systems for hydrogen sulfide. Removal of halogenated and sulfur bearing gaseous compounds from high temperature thermal oxidizers and drilling platforms waste. Well drilling hydrochloric acid storage tanks.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Air pollution control (APC) equipments for chemical industry

    Sulfur plants, acid plats etc. Chemical industry is important to our modern society, but they also produce large quantities of chemical byproducts. These byproducts can be dangerous, and if they cannot be used for other processes, they are often incinerated, causing large amounts of hazardous substances which end up in the flue gases.

    By Envibat AB based in Skellefteå, SWEDEN.

  • Pi² Technologies for Petrochemical

    Petrochemical plants, and especially their process water recovery plants, are a major source of air pollution. If odours are a recurring problem, the emission of greenhouse gases may also be particularly important.

    By Pi² Technologies Inc based in Montreal, QUEBEC (CANADA).

  • Membrane filtration systems for biotechnology and pharmaceutical industry

    GEA Filtration is experienced in processing a wide range of products on a commercial basis and by testing products at the plant site or in our pilot plant testing facility. Definition of the Industrial Biotech and Environmental Biotech Sector. This sector uses living organisms to manufacture a variety of products that result in the reduction of pollution, resource consumption and waste. Typical products include bioethanol, industrial enzymes, biological fuel cells, enzymes for bioremediation, biodegradable plastics and much more.

    By GEA Filtration based in Hudson, WISCONSIN (USA).

  • Premium

    EDXRF spectrometers for ultra low sulfur

    Compliance with the ASTM method at low concentrations sulfur. Sulfur is a major element of importance because it forms sulfuric acid in the atmosphere when burned and has harmful impact on the human health and on the environment. In the mid-2000`s, the Environmental Protection Agency (EPA) began a program to greatly reduce the amount of Sulfur in petroleum products. The current allowable sulfur limit in vehicle fuel is 15 ppm (parts per million). To reduce the pollution coming from vessels the international maritime Organization (IMO) established new limits on emission of sulfur oxides. In Emission Controlled Areas the sulfur limit will be 0.1 % starting 2015. The continued strategy by EPA and IMO to reduce the amount of sulfur in petroleum products put a great demand on sulfur monitoring in fuel and oil products.

    By Xenemetrix Ltd. based in Migdal Haemek, ISRAEL.

  • Premium

    Wastewater Treatment

    Many industrial and pharmaceutical processes generate wastewater with volatile contaminants that increase the COD and BOD to a point where discharging to municipal wastewater is very costly or not an option. These contaminants can be removed from the water by distillation, substantially lowering the disposal cost, and, in many cases, the removed components can be further purified and reused in the process. MEGTEC offers the following solutions to remove the volatile contaminants and make wastewater suitable for discharge to most municipal wastewater treatment plants: Stripping columns using direct steam or a reboiler Distillation columns using indirect steam heat sources Our technologies have been applied to a range of processes including wastewater treatment from industries such as Pharmaceutical, Semiconductor, Chemical and Petrochemical.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Dust Collector

    Range of products & equipment of our organization Dust collector , Dust Extraction System Pulse Jet Bag Filter for various applications Cyclone, Multi Cyclones, Fume Extraction System, Application Coal Handling Plant, Crusher & Screen House, Bunker Houses/ Bunker bin, Fume Exhaust , Various Belt Conveyors Transfer houses, Sponge Iron Plant ,Wooden mills, Cement Plants, Paper Mills, Rice mills, Induction Furnace, Boilers, Rolling Mill Furnace, Pharmaceutical Industries, Furnaces, Edible Oil Mills, rubber industry Ventilation System Ventilation and Pressurization Systems Air Washers, Air Handling unit Industrial Fan, Exhaust Fan, Axial Fan, Roof Extractor, Air Conditioning System, All Power Plant, All panel Rooms, , Turbine Hall,Tunnels Ventilation, Work Shed Area, Ventilation for Process Room,Any ventilation work in factory

    By Enviro International corporation based in GHAZIBAD, UP, INDIA.

  • Premium

    Industrial air pollution control for the oil and gas

    Few industries attract the attention of the public as does the oil & gas industry with its related strategic products (basic materials for the chemical, pharmaceutical, varnish and cosmetics industries). The bringing of oil and gas from their original sources to the consumer, into their final forms, represents one of the most complex chains in the quest to add value to raw materials.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you