Only show results in Virginia? Ok

pharmaceutical process water Applications

  • Premium

    Water treatment for the pharmaceutical industry

    The pharmaceutical market is at the center of personal care, serving to protect public health and improve the quality and span of life. This global market requires treatment technologies to disinfect, measure, control and filter process water and wastewater generated from production.

  • Premium

    Chemical Water Treatment for process chemicals

    Kurita Water Solutions provides oil refineries and petrochemical plants with all the chemical additives used directly in the process, to fight the problems caused by the composition of the crude oil and the intermediate products. In oil refineries and petrochemical plants the goal is to improve efficiency and to optimise the production capacity.

    By Kurita based in Tokyo, JAPAN.

  • Acid Regeneration Process

    Acid Regeneration Process The commercially most relevant field of application for HCl regeneration processes is the recovery of HCl from waste pickle liquors from carbon steel pickling lines. Other applications include the production of metal oxides such as, but not limited, to Al2O3 and MgO as well as rare earth oxides by pyrohydrolysis of aqueous metal chloride or rare earth chloride solutions. A number of different process routes are available. The most widely used is based on pyrohydrolysis and adiabatic absorption of hydrogen chloride in water, a process invented in the 1960s. However tightening environmental standards and stringent air permit policies render it increasingly difficult to establish new pyrohydrolysis based acid regeneration plants.

    By Insheng Engineering Co., Ltd based in Pingtung, TAIWAN.

  • Industrial water treatment products for chemical processing

    Ethylene, styrene, ammonia, methanol, and other chemical producers require sustainable utility treatment results. Our technology focus is on reducing corrosion and fouling, while meeting compliance, safety regulations, and alternative water resource demands.

    By ChemTreat, Inc. - a subsidiary of Danaher Corporation based in Glen Allen, VIRGINIA (USA).

  • Traveling Water Screens for Chemical and Processing Plant Industy

    Our chemical and processing plant services include custom traveling water screen design and installation. We are one of the leading traveling water screen suppliers worldwide. Our screen solutions solve debris removal plant inflow sources to deal with solid contaminating material. Varied screen mesh sizes allow for use in varying conditions and applications.

    By International Water Screens based in Bakersfield, CALIFORNIA (USA).

  • Industrial process and environmental monitoring

    Laser Gas analyzer Oil refining, CO, CO2, O2, CH4 Ethylene cracking CO, CO2, etc. EO/EG, PE/PP, O2, C2H4, etc. Ethyl benzene/styrene monomer/PS, O2, CO/CO2, Trace water in the benzene PTA, CO, CO2, O2 Coal gasification O2 Mathanol/ammonia/urea O2, CO, CO2, NH3, etc. Chlor-alkali/PVC H2O, O2, CO2, C2H4, etc Sulphuric acid O2

    By HANGZHOU ZETIAN TECHNOLOGY CO., LTD based in Hangzhou, CHINA.

  • Premium

    Water treatment solutions for the chemicals & pharmaceuticals industry

    Water is a critical ingredient in chemical manufacturing operations; consistent and high-quality supplies are needed for a range of purposes including production, material processing, and cooling. Water treatment systems have to often comply to very stringent industry specific qualifications and certifications. A stable and guaranteed water supply is critical and duty stand-by solutions are frequently requested from end-users.

    By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.

  • Premium

    Resin technology solutions for the pharmaceutical industry

    Purolite pharmaceutical resins are used in drug formulations as Active Pharmaceutical Ingredients (APIs) or excipients. They meet the demands of the American (USP), European (Ph.Eur.), British (BP) and Japanese (JP) pharmacopoeias. Drug Master Files are held for each, single, listed pharmaceutical product manufactured in Purolite’s facilities. Pharmaceutical resins used in extraction and purification processes or for the production of water for injectables meet the requirements of both the US Food and Drug Administration (FDA) and the European Union.

    By Purolite Corporation based in Bala Cynwyd, PENNSYLVANIA (USA).

  • Premium

    Ultraviolet disinfection systems for the pharmaceutical industry

    With over twenty five years of industry experience, atg UV Technology are market leaders with a state-of-the-art UV product range, which provides the pharmaceutical industry with advanced technology solutions for a variety of applications worldwide. Specially designed and developed for the pharmaceutical industry, atg UV`s breakthrough chamber design eliminates all crevices and unnecessary fittings, maintaining the integrity of the system. Our leading UV technology is used in a number of key areas, including ultra-pure water generation, the treatment of process water and disinfection of contaminated effluent water discharges. Additionally, atg UV`s bespoke engineering skills and market-leading technology have also allowed for the development of site specific solutions for a number of leading pharmaceutical companies worldwide.

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Wastewater treatment for the chemical and pharmaceutical industry

    The water from pharmaceutical companies can cause big troubles because of the high variability in their manufacturing processes. Depending on the kind of raw materials used, the effluents may even be toxic, hence why the most conflictive effluents have to be separated from the rest and not to be sent to the general treatment.

    By Aguambiente based in La Cistérniga, SPAIN.

  • Premium

    Water treatment solutions for metering of solids

    If you need to meter powder and granulates with accuracy, ProMinent systems are the right choice. They always store, transport and process solids reliably and precisely thanks to our exacting quality requirements.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY.

  • Freeze Drying

    Lyophilization, commonly referred to as freeze drying, is the process of removing water from a product by sublimation and desorption. The freeze drying process is optimised by the introduction of solvents and gas species to improve product quality and to enhance the drying process. Hiden's gas analysers provide detailed information about the gas/vapour composition during both the primary and secondary drying phases. Detection of the on-set of the secondary drying phase is readily detected. Analysis during the secondary drying phase enables a reduction in process cycle time and provides end point detection. Accurate determination of a user defined process 'end point' enables high consistency in product yield from batch to batch.

    By Hiden Analytical Ltd. based in Warrington, UNITED KINGDOM.

  • Water treatment systems for chemical industry

    The effluents that accrue in the cleaning process of silo vehicles and containers for transportation of raw materials for the chemical industry, are highly complex and constantly changing in the composition of wastewater. Flocculation as the prior art of treatment for chemical waste water can not remove many of the completely dissolved invisible substances. Thus, the residual stresses are evident despite high claritv of the `Treated effluent` is often well above the levels witch are applicable for wastewater in domestic environments.

    By Weidner Ireland Ltd based in IRELAND.

  • Water quality monitoring for chemical industry

    Chemical plants that produce high quantities of phenols (plastics, pesticides and pharmaceutical industries) and other aromatic organic compounds are excellent candidates for wastewater characterization via spectral analysis. Chemicals that contain conjugated double bonds absorb UV radiation remarkably well. The benefits include higher precision in process control as well as optimization of wastewater treatment.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Solutions for Petrochemical

    Petrochemical plants, and especially their process water recovery plants, are a major source of air pollution. If odours are a recurring problem, the emission of greenhouse gases may also be particularly important.

    By Pi² Technologies Inc based in Montreal, QUEBEC (CANADA).

  • APHA Color #3020

    Measurement of APHA color either on-line or in a laboratory setting using a photometer. Background: APHA is sometimes referred to as the Platinum Cobalt (Pt/Co) or Hazen scale. Also referred to as a “yellowness index”, the APHA color scale is a common method of comparison of the intensity of yellow-tinted samples to assess the quality of liquids that are clear to yellowish in color. Originally developed to determine the purity of municipal water supplies, it is now used as a metric for purity in the water, chemical, oil, plastics, and pharmaceutical industries. APHA color quantifies the appearance of trace amounts of yellowness, which is a visual indicator of product degradation due to exposure to light or heat; the presence of impurities and negative effects of processing. As such APHA color is often used as a product release specification. APHA is a single number yellowness index. The units are based on a dilution of a 500ppm solution of PtCo.

    By Guided Wave, Inc. based in Rancho Cordova, CALIFORNIA (USA).

  • Premium

    Water treatment solutions for chemical industry

    Precision with fluids in the chemical industry. ProMinent metering systems guarantee precision in chemical process engineering. They reliably meter even the most difficult of fluids, thus increasing the quality of your products.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY.

  • Premium

    Water treatment chemicals for the refinery and petrochemical industry

    Highly complex processes in refinery and petrochemical plants demand the competent handling of operational facilities and products. Water and process treatment also have to meet these requirements in order to ensure plant and system safety. Kurita offers you precisely this security: with decades of experience, we advise and support you in the various fields of application. Take advantage of our know-how and our customer proximity.

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Water treatment equipments for petrochemical industry

    The petrochemical industry is a process intensive industry which utilizes relatively large quantities of water in its refining operations. This industry involves the processing of chemicals derived from petroleum and natural gas that are used for a variety of chemical purposes. The wastewater generated by this industry has created many petrochemical wastewater treatment challenges.

    By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).

  • Water treatment research for refining and petrochemicals industry

    Refining processes like distillation use high quality steam that must be generated from ultrapure water. Advanced wastewater treatment technologies will help the industry meet tough regulations concerning hazardous waste products from process operations. As the industry expands into water-scarce areas in India, China and the Middle East, marginal sources can help meet the demand for water. Desalination and reuse technologies will secure a reliable source of water and help the industry manage its water impact. Water technology suppliers have the opportunity to tap into a market worth $768 billion.

    By Global Water Intelligence (GWI) based in Oxford, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you