Only show results in Virginia? Ok

pharmaceutical water Applications

  • Premium

    Water treatment for the pharmaceutical industry

    The pharmaceutical market is at the center of personal care, serving to protect public health and improve the quality and span of life. This global market requires treatment technologies to disinfect, measure, control and filter process water and wastewater generated from production.

    By De Nora Water Technologies based in Colmar, PENNSYLVANIA (USA).

  • Premium

    Ultraviolet Disinfection for Ultrapure Water

    atg UV Technology have a range of systems specially designed for the production of high quality ultra pure water for use within a range of pharmaceutical and electronic production (semi conductors) applications. Ultrapure Water TOC Reduction De-Chlorination Ozone Destruct

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Trislot screens for the pharmaceutical industry

    Trislot screens have many applications also in the pharmaceutical industry. Besides the classical application in water treatment systems (ion exchange, molecular sieve,... ) the screen are used for classification and in dryers/coolers. The Sintered Laminate is used in Nutsche filters for the pharmaceutical industry.

    By Trislot N.V. based in Waregem, BELGIUM.

  • Water quality monitoring systems for pharmaceutical industry

    The monitoring of “Purified Water” of “Water for Injection” in the pharmaceutical industry is highly regulated. These instruments comply with the highest pharmacopoeia standards.

    By SWAN Analytische Instrumente AG based in Hinwil, SWITZERLAND.

  • Premium

    Ultra pure water treatment

    Ultra pure water is mainly used in the semi conductor and pharmaceutical industry. Because of the continuing miniaturilisation in the semi conductor industry, the specifications become more strict every year. Ultra-pure water contains by definition only H20, and H+ and OH- ions in equilibrium. Therefore, ultrapure water conductivity is about 0,054 uS/cm at 25oC, also expressed as resistivity of 18,3 MOhm.

    By Lenntech Water Treatment based in Delft, NETHERLANDS.

  • Premium

    Water treatment chemicals for the chemical and pharmaceutical industry

    Resource consumption in the chemical industry is enormous. Although the industry has already succeeded in significantly reducing its energy demands, it remains challenged by high energy costs, high water consumption and increasingly stringent regulations. Energy efficiency, increased production and plant availability are therefore important factors contributing to a competitive advantage. We would be glad to support you. Kurita offers a broad spectrum of resource-saving solutions as well as solutions for improving production and plant safety.

    By Kurita based in Ludwigshafen, GERMANY.

  • Water Quality Measurement and Control for Nutraceuticals

    The dietary supplement and nutraceutical market is changing rapidly in response to the FDA`s new Dietary Supplement Current Good Manufacturing Practices (cGMPS) `Final Rule` (21 CFR Part 111), published on June 25, 2007. The Final Rule adopts all requirements specified in 21 CFR 210 and 211, which affect pharmaceutical manufacturers, and apply to all companies that manufacture, package, label, or hold dietary supplements and nutraceuticals. Dietary supplements or nutraceuticals imported from outside the United States are also subject to the Final Rule.

    By GE Analytical Instruments based in Boulder, COLORADO (USA).

  • Wastewater treatment for the chemical and pharmaceutical industry

    The water from pharmaceutical companies can cause big troubles because of the high variability in their manufacturing processes. Depending on the kind of raw materials used, the effluents may even be toxic, hence why the most conflictive effluents have to be separated from the rest and not to be sent to the general treatment.

    By Aguambiente based in La Cistérniga, SPAIN.

  • Endocrine Disruptors Oxidation

    Removal of a diverse group of organic contaminants from surface water and wastewater using ozone (O3) and O3 combined with hydrogen peroxide (O3/H2O2).


  • Premium

    Advanced water purification technologies for pharmaceutical, medical, & laboratory sector

    SnowPure has been providing EDI technology to the pharmaceutical and medical markets since 1997. We have installations in over 47 counties including the United States, Canada, South America, India, Europe, Japan, China and Southeast Asia.

    By SnowPure Water Technologies based in San Clemente, CALIFORNIA (USA).

  • Biofiltration

    Biological Aerated Upflow Filtration (BAF) for high efficient Waste Water Treatment in Chemical & Pharmaceutical Industry with more than 20 reference plants and more than 20 years of experience

    By AquaBiotec based in Paris, FRANCE.

  • Freeze Drying

    Lyophilization, commonly referred to as freeze drying, is the process of removing water from a product by sublimation and desorption. The freeze drying process is optimised by the introduction of solvents and gas species to improve product quality and to enhance the drying process. Hiden's gas analysers provide detailed information about the gas/vapour composition during both the primary and secondary drying phases. Detection of the on-set of the secondary drying phase is readily detected. Analysis during the secondary drying phase enables a reduction in process cycle time and provides end point detection. Accurate determination of a user defined process 'end point' enables high consistency in product yield from batch to batch.

    By Hiden Analytical based in Warrington, UNITED KINGDOM.

  • Premium

    Pumps for Soap

    While most manufacturers of detergent and soap products are medium size companies mixing various chemicals according to their own recipes, the chemicals are produced by world-wide chemical companies. DESMI is a well-respected supplier of pumps for these applications. Special features and product demands are necessary for being a supplier in this field. DESMI has the products asked for and has a large number of ROTAN® pumps in operation. The ingredients list of for instance liquid hand soap will often be water, Sodium Laureth Sulphate, Sodium Chloride, Ocamide Dea, Glycerin, Cocamidopropyl Betaine, Coco-glucoside, Glycol Disterate, Glycerol Oleate, PEG-7 Glycerol Cocoate, Citric Acid, perfume, Isopropyl Myristate, Glycerol Stereate, Tetrasodium Iminodisuccianate, Methylchloroisothiazolinone, and Benzoic Acid.

    By DESMI A/S based in Noerresundby, DENMARK.

  • Premium

    Chemical Water Treatment for process chemicals

    Kurita Water Solutions provides oil refineries and petrochemical plants with all the chemical additives used directly in the process, to fight the problems caused by the composition of the crude oil and the intermediate products. In oil refineries and petrochemical plants the goal is to improve efficiency and to optimise the production capacity.

    By Kurita based in Ludwigshafen, GERMANY.

  • Premium

    Chemical water treatment for petrochemical

    Petrochemical production plants suffer from repeated operational disruption caused by undesired fouling, corrosion and foam problems. The consequences are high operating costs and occupational safety concerns. Our dedicated treatment programs help to secure a failure-free operation of your plants and decisively contribute to a considerable reduction of the total operating costs.

    By Kurita based in Ludwigshafen, GERMANY.

  • Premium

    Water quality monitoring for chemical industry

    Chemical plants that produce high quantities of phenols (plastics, pesticides and pharmaceutical industries) and other aromatic organic compounds are excellent candidates for wastewater characterization via spectral analysis. Chemicals that contain conjugated double bonds absorb UV radiation remarkably well. The benefits include higher precision in process control as well as optimization of wastewater treatment.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Water treatment systems for chemical industry

    The effluents that accrue in the cleaning process of silo vehicles and containers for transportation of raw materials for the chemical industry, are highly complex and constantly changing in the composition of wastewater. Flocculation as the prior art of treatment for chemical waste water can not remove many of the completely dissolved invisible substances. Thus, the residual stresses are evident despite high claritv of the `Treated effluent` is often well above the levels witch are applicable for wastewater in domestic environments.

    By Weidner Ireland Ltd based in IRELAND.

  • Monitoring of mercury in waste water

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you