Only show results available in Virginia? Ok

pipe system Applications

  • Sewer Piping Systems

    Whether the project calls for a sanitary or industrial sewer relining, sewer cleanout or installing new sewers, ISCO has the solution. Pipe offered by ISCO Industries for sewer applications includes HDPE pipe, PVC pipe, ductile iron pipe and profile pipe. ISCO Industries offers you solutions that are economical, durable, long-lasting and easy to install.

    By ISCO Industries, LLC based in Louisville, KENTUCKY (USA).

  • Premium

    Grease removing in wastewater pipes

    Whether a collection system is handling domestic, commercial, or industrial waste; grease accumulation causes problems in wet wells, lift stations and pipelines. Problems with grease include interference with wet well level controls, reduced wet well capacity, plugging of pipes and pumps, and unsafe working conditions.

    By Carus Corporation based in Peru, ILLINOIS (USA).

  • Stormwater Piping Systems / Stormwater Drainage

    A high-quality drainage system is imperative for a strong infrastructure.  The integrity of roads, thoroughfares, parking lots and other paved surfaces depend on a reliable drainage system underneath to keep them intact.  ISCO has been helping solve customer`s drainage issues for years.  From the initial engineering planning phase to the finished product, ISCO is able to help.  ISCO offers all the pipe and fittings for any of your drainage projects. Selecting the longest-lasting, durable and cost-effective piping products is a key step in storm water management. To help you choose the best option for your project, ISCO Industries supplies HDPE, PVC pipe as well as perforated and HDPE corrugated tubing drain tile for storm water management applications.

    By ISCO Industries, LLC based in Louisville, KENTUCKY (USA).

  • Drill pipe cleaning

    Problem: When scale and hardened mud build up in oil well drill pipe, plugged drill heads are the usual result. This reduces efficiency and increases downtime. Traditional rattle-and-brush systems can leave some build-up behind and require a rinse operation to flush debris and drilling fluids.

    By NLB Corp. based in Wixom, MICHIGAN (USA).

  • Premium

    Large pipes & ducts, hot tapping, purging flow solutions

    The measurement of gas flow in large ducts or pipes offers its own set of challenges. Large ducts and pipes often have swirls or turbulence in them which makes measurement of true gas flow difficult. Sierra has developed a number of solutions to this vexing problem, including stand-alone flow conditioning elements and multiple arrays of thermal sensors. By including hot taps and purging systems, such arrays can be very flexible.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Piping & ducting solutions for the industrial industry

    All of the products manufactured by PROCO are designed to withstand even the most demanding industrial applications. We design our expansion joints and check valves to fit many different industrial applications, including paper and pulp systems, marine services, oil and gas, and many more. Whatever your industry may be, PROCO can help you find a solution for even your toughest industrial application. PROCO operates worldwide, and maintains one of the largest product inventories in North America.

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA).

  • Premium

    Piping & ducting solutions for the HVAC industry

    The heating, ventilation, and air conditioning industry refers to the technology of indoor temperature control. A sub-discipline of mechanical engineering, HVAC systems are crucial in the design of residential as well as commercial structures. These systems control the temperature, and also the quality of the air that gets circulated, by replacing or exchanging the air in a particular space. Heating, cooling and ventilation systems require high-quality, precision-engineered parts, such as those manufactured by PROCO Products. PROCO operates worldwide, and maintains one of the largest product inventories in North America.

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA).

  • Oxygen Generating Systems for Sewage Treatment

    Using Oxygen to Solve Waste Water Problems Lack of oxygen can cause inadequate purification or even anaerobic decomposition, as well as offensive odors. Injecting oxygen into sludge beds &/or piping allows you to: * Reduce nitrogen levels * Meet peak O2 demands * Have a back up to your aeration system * Pre-purify waste water * Control odors * Deter corrosion damage * Meet increased requirements regarding waste water purification

    By Oxygen Generating Systems Intl. (OGSI) based in North Tonawanda, NEW YORK (USA).

  • Microbial testing in cooling water system industry

    Superior reliability for superior control! Biocide treatments are essential to control microbiological growth in cooling systems. If not properly managed, the warm environments of cooling systems are ideal for the growth of microorganisms. As microorganism communities grow in cooling systems, they can attach to pipe walls and form biofilms. These biofilms pose serious risks, from human health risks like Legionnaire`s disease to reduced operating efficiency and eventually to equipment failure via microbiologically influenced corrosion (MIC).

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Water Monitoring and Flow Measurement Systems for Water Supply

    Although there is enough water on earth, its uneven distribution, the rising population and our carelessness drinking water starts to get short. In the future more and more pipelines for drinking water will be built all over the globe. In order to operate huge and complex pipe networks efficiently, water flow measurement and flow monitoring will become necessary. The increasing efficiency of ultrasonic flow meters will make such calculations more and more effective.

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

  • Force Main Systems Sulfide Odor Control with Hydrogen Peroxide

    Force main systems are typically high sulfide odor generators due to septicity conditions related to full pipe flow and a greater anaerobic slime layer (biofilm) thickness. Primary factors that influence sulfide loading generation in a force main include sewage temperature, BOD, retention time, pipe size and flow. Gaseous hydrogen sulfide (H2S) release at the force main discharge is usually the main concern related to odor and corrosion control needs; however, corrosion problems within the pipe can be of a concern (e.g. "crown cutting") at locations where air pockets can lead to concentrated H2S gas build up. Some basic considerations for assessing an appropriate sulfide odor treatment method for force main systems include: Retention time / duration of control Pump station type / cycling (e.g. vfd; start/stop, etc). Force main injection tap points, if any (e.g. air relief valves) Existence of intermediate re-lift stations or in series pump stations Manifold force main systems

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Premium

    Recycling equipments for shredding industrial plastics

    Plastics are one of the most commonly recycled materials today. Granutech’s Saturn Shredders are designed to process a wide range of plastic materials, from films to pipe. Our high performance shredders use low to mid-range speed, and high torque to efficiently cut the plastic materials while preventing melting during processing. Custom blade sizes and configurations offer precise sizing and produce materials ready for downstream processing. Our systems can integrate grinders and granulators to complete processing of the material for re-use.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Fiberglass Reinforced Plastic (FRP) Equipment for Mining & Metallurgy Industry

    Zhongyi engineers and manufacturers quality FRP equipment for mining and metallurgy industry, such as:  Mixer settlers, Electrowinning cells, Electrostatic precipitators. Storage tanks, CCD Vessels, Ducting, fans and dampers. Scrubbers, Clarifiers, Absorbers and Venturi. Cooling towers, Weirs, Abrasion resistant piping. Reactors, Cell covers, Fume stacks and stack liners. Dust control systems, Walkway grating, railing and stairways.

    By Zhongyi GRP Industrial based in Jizhou, CHINA.

  • Premium

    Fly Ash - Industrial Vacuum

    Fly Ash can cause many problems. The Vac-Con & Vector Pneumatic Vacuum systems can assist and solve many of these problems. Our high-performance vacuum systems are manufactured in three basic configurations: Truck mounted, Trailer mounted, and Fixed/static installed. Any of these systems can be integrated into the existing power plant design. All of our vacuum systems can be utilized to solve your plant’s fly ash removal/clean-up needs and can assist in many other maintenance projects. All can be tailored to fit into your power plant’s specific needs. Vac-Con Truck mounted Industrial vacuum systems are equipped with large storage debris tanks with self-cleaning intake filter systems. The Industrial Trucks vacuum the waste products through existing manifold piping or with hoses attached directly to the debris tank. When fully loaded, the truck can then drive directly to the disposal site and discharge the waste products. The Industrial Truck offers a great amount of flexibility of operation and can be utilized anywhere in your facility for many different types of normal and emergency maintenance operations. The Vac-Con Industrial Vacuum Truck can be utilized on both wet and dry materials. The same Vac-Con truck can be used for removing Fly Ash from your plant, coal from broken intake belt conveyors, or used to suck wet muddy material from storage lagoons. The Vector Trailer mounted Vacuum Systems are designed to be used in several locations around power plants. The Trailer mounted Vacuum Systems connect to Manifold piping located in key areas within your power plant. The Vacuum systems move the waste products from the plant and deposit these products into moveable storage containers. The loaded storage containers when full can then be moved to the disposal sites for discharge. Vector Static Mounted Vacuum systems are designed to vacuum and remove Fly Ash and other bulk waste products through manifold piping from operational areas of the plant and deposit these waste products into collection storage silos for later transport to disposal sites. The fixed vacuum systems are electric motor driven and are normally installed as a permanent addition to in-plant existing conveying systems. Please contact us with any requirements you may have. We will evaluate your request and respond with solutions specific to solve your problems and fit your needs.

    By Vac-Con, Inc. based in Green Cove Springs, FLORIDA (USA).

  • Continuous Monitoring of Wastewater

    The Sorbisense method allows for efficient monitoring of the sewage system and can help reduce costs of operation and environmental impact. The method is particularly well suited for tracking the source of periodic discharges, the identification of faulty pipe connections of the measuring of values in the recipient. The method also allows for measurements in dynamic sources - such as emissions from roads, roofs, parking lots and overflow

    By Sorbisense A/S based in Tjele, DENMARK.

  • Civil engineering applications

    Civil engineering jobs in water are typical for Watermaster Classic. Watermaster is ideal when e.g. embedding cables and pipes in the bottom and it can also do other kinds of maintenance work effectively. The harder the conditions are, the greater Watermaster`s advantages compared to other technologies. The machine moves to the site with its own propulsion system and remote controlled spuds give proper anchorage for steady and efficient excavating work as well as for cable mounting.

    By Watermaster - Aquamec Ltd. based in Säkylä, FINLAND.

  • Solutions for Safe disposal during Emergencies, leakages, Tank Cleaning operations

    For temporary installation of a are, needed for only a short time in one place to handle localized waste gas disposal problem. SIES offers skid-mounted Mobile Flares Units to allow mobility. Such types of systems are useful for Gas pipe line/ Gas distribution network within a large plant (Petrochemical & Refineries) & Landfills. SIES design & Supply Mobile Flare for Oil and Gas industry, Waste gases, LFG operations and tank Cleaning operations. The Flares have inbuilt capabilities to handle wide variety of gas with full safety and precaution as per API Standards..

  • Smoke generator device for leak testing & building envelope testing

    Smoke is the perfect medium for discovering where leaks are and how big they are! Filling a `leaky` building, ductwork, pipes, aircraft or containment area with smoke and ideally adding a small amount of pressure to the area being tested, will result in a visible discharge of smoke and, simply put, the greater the volume of smoke, the bigger the leak. After Concept developed a bespoke system for their aircraft testing requirements, a spokesperson for the RAF commented: `The use of smoke as a means by which to detect cabin pressurisation leaks has been shown to be extremely effective and is unquestionably superior to any alternative detection method used to date!`

    By Concept Smoke Systems based in Maidenhead, UNITED KINGDOM.

  • Real-time In-situ Effluent Monitoring

    The UviLux BOD Indicator enables in-situ, real-time, reporting of BOD within both natural water systems and water processing plants. The monitor detects fluorescent proteins that are inherent within sewage and slurry and provides an output in BOD equivalent units. The principle behind the measurement is the excitation of Tryptophan-like fluorescence within UV wavelength band, which has been shown to correlate with both BOD and bacterial contamination. With complete flexibility of deployment methodology, the UviLux BOD Indicator can be applied to both water supply and water recovery processing plants. For water supply processing, the UviLux BOD Indicator can be applied at the front end to the water intake to provide alarm of any contaminated water entering the plant. Applications within Waste Water Treatment Works can include monitoring of effluent levels at the final outflow point (into rivers and coastal areas) as well as the primary, secondary & tertiary stages, the data potentially feeding into energy saving systems to optimise process performances. The CTG UviLux BOD Indicator in-situ fluorometer can also be used within pipe and channel networks to test for incidences of black water and grey water cross-over.

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • EDI Solutions

    QUA’s FEDI® (Fractional EDI) stacks have superior hardness tolerance compared to the other EDI products on the market. With a dual voltage process this allows for a higher flexibility and tolerance to inlet water conditions, thus lowering the risk of scaling, and improving the plant's design economics and reliability. FEDI stacks are available in three different models which can be applied either for higher hardness tolerance or high water flow rates. MEGA FEDI stacks are ideal for large capacity, high flow systems normally required in heavy industrial projects such as power, petrochemicals, & electronics for high purity water needs. Each stack can handle treated water flow of up to 75 GPM . MEGA FEDI’s unique stackable design minimizes piping, reduces footprint, and makes it simple and easy to install on skids. FEDI-Rx products are specially designed for applications in pharmaceutical, biomedical and laboratory applications where installations require hot water sanitization to meet

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you