Only show results available in Virginia? Ok

plastic recycling process Applications

  • Premium

    Plastic shredding for the plastic recycling industry

    Plastic materials mainly consist of crude oil and are therefore in demand for environmentally friendly recy-cling processes for the conservation of resources. In order to live up to the numerous applications and indi-vidual expectations of our customers, LINDNER reSource fully concentrates on processing of plastic materials in the Lindner group of companies.

    By Lindner-Recyclingtech GmbH based in Spittal/Drau, AUSTRIA.

  • Premium

    Recycling equipments for shredding industrial plastics

    Plastics are one of the most commonly recycled materials today. Granutech’s Saturn Shredders are designed to process a wide range of plastic materials, from films to pipe. Our high performance shredders use low to mid-range speed, and high torque to efficiently cut the plastic materials while preventing melting during processing. Custom blade sizes and configurations offer precise sizing and produce materials ready for downstream processing. Our systems can integrate grinders and granulators to complete processing of the material for re-use.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Continuous process waste plastic to oil recycling

    continuous waste plastic to oil Solution: Continuous pyrolysis plant Function: Recycling waste plastic to fuel oil Applicable raw material: ABS / Mixed plastic, PE/PP/PS Plastic, PET Plastic not recommended Output: 50-90% fuel oil ,10-50% carbon blakc Heating fuel: Coal / wood/ fuel oil / gas Pyrolysis plant land size: 25x20m Reactor design: Mutiple reactors with internal rotating Reactor material: Q245/ Q345 Boiler plate

  • Premium

    Recycling of plastic waste

    Recyclable plastics can come from a large range of sources. Shredder residues containing plastics are typically coming from small domestic appliances, electrical and electronic equipment and cars. These materials each have their own difficulties when they have to be processed to recover clean plastics. With the GRS equipment we are able to handle each type of these materials.

    By AD REM N.V. (Valtech Group) based in Menen, BELGIUM.

  • Dewatering and water purification for plastic recycling industry

    The preparation of plastic waste is an important process both for protection of raw materials as well as for reduction of waste. In this context, BELLMER KUFFERATH systems can be applied for all kinds of operations containing wet preparation processes.

    By BELLMER KUFFERATH Machinery GmbH based in Düren, GERMANY.

  • Systems for the plastic recyclers & e-scrap industry

    Proper preparation and processing can significantly impact the return you get on your plastic. Knowledge of the markets, specifications, grades and other variables that affect plastic value is crucial to maximizing your success. Do you need multiple vertical balers or a large, two-ram solution? Should you shred before processing? OBC can leverage our vast experience in plastic recycling to help you analyze your needs and prescribe the right solution.

    By OBC Baling Equipment based in Cleveland, OHIO (USA).

  • Premium

    Processing of LCD screens

    The safe extraction of valuable raw materials: robots automatically dismantle monitors containing mercury, while protecting workers’ health at the same time. According to initial projections, around three million LCD screens will be recycled in Germany in 2016. However, their backlighting system often contains mercury, which means they are classified as 'hazardous waste' in accordance with the EWC, and as 'Collection Group 3' in accordance with the Electrical and Electronic Appliance Law. They also contain valuable raw materials, such as metals and plastics, which have to be recovered in such a way, that the environment is not harmed. However, recycling specialists, Erdwich Zerkleinerungssysteme GmbH, have now developed an alternative: The company from Kaufering has developed an automatic processing system that enables mercury and other valuable raw materials to be easily extracted and recycled in an environmentally-friendly way.

    By Erdwich Zerkleinerungssysteme GmbH based in Kaufering, GERMANY.

  • Premium

    Removal of Non-Ferrous Metals in the Recycling Industry

    Non magnetic metals such aluminum + copper can be separated using eriez eddy current separators or meta sorters. Eriez equipment, either as individual units or complete systems, is designed for efficient + economical processing of municipal solid waste, co-mingled recyclables, shredded automobiles, Electronic Scrap, Glass Cullet, Plastic (PET), foundry sand and many other resource recovery options.

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM.

  • Premium

    Metal detection for in the Recycling Industry

    Eriez manufactures the broadest range of metal detectors in the industry. Whether looking for small ferrous or nonferrous metal pieces, tramp metal or digger teeth, we can provide you with a metal detector to solve practically every metal contamination problem. Eriez metal detectors have varied applications in large array of industries from aggregates to recycling, ceramic to food, mineral processing to glass, plastics and rubber to packaging. 

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM.

  • Premium

    Removal of Ferrous Metals in the Recycling Industry

    Carbon steel metal can be separated from non-recyclables using Eriez magnetic separators.

    Eriez equipment, either as individual units or complete systems, is designed for efficient and economical processing of municipal solid waste, co-mingled recyclables, shredded automobiles, Electronic Scrap, Glass Cullet, Plastic (PET), foundry sand and many other resource recovery options.

    From permanent magnets to scrap drums and magnetic drums to metal detection for further material purity and feeding equipment, Eriez recycling team assists recycled material processors, material recycling facilities alike in improving product quality and recovering valuable commodity. 

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM.

  • Premium

    Shredding of textiles with Mercodor shredding systems

    The Mercodor shredding machines for shredding of textiles are equipped with special cutters and shredders which make very easy the shredding of textiles such as old clothing, protective clothes and even military clothing such as uniforms. Out textile shredders are distinguished in particular by their very high availability and process safety just when they process textile fabrics such as rags, nonwovens, jute sacks, nonwovens or other textiles such as textile fabrics with corundum and up to textile plastic bandages.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Premium

    Information security shredding & product destruction

    Helping Manufacturers Reduce Associated Losses and Liability Risks. Material Recovery: Waste materials (or defective products) can be shredded to allow recycling or re-use. Wastes generated in manufacturing process such as plastic, rubber, or fibers are ideal candidates for reprocessing. Packaged goods can be shredded to open containers. Contents such as detergent can be collected and separated for repackaging, while contents such as canned food can be separated and reprocessed into animal feed.

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • Premium

    Reliable Shredding Technology for Hospital Waste

    Our shredding machines are perfectly suited for the chemically aggressive material in your hospital waste. After the shredding process, the material can be optimally utilised thermally or disposed of together with municipal solid waste once it has been sterilised. The shredding is so effective that the granulate does not give any indications of the source material. Hospital waste consists of very different types of waste and requires special treatment during disposal due to the presence of infectious and highly contaminated materials. Depending on the waste type or classification, the hospital itself might need to specially treat the waste or store it in dedicated plastic containers or drums on-site.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Applications and Air Pollutants Removed in Hazardous, Solid and Liquid Waste Treatment Operations

    Venturi scrubbers with FORCE FLUX Condensation technology and Wet Electrostatic Precipitators for industrial, municipal, sewage sludge and pathological waste incinerators to remove micron, submicron particulate, heavy metals and acid gases. Special quencher/scrubber systems for dioxin removal. HCL scrubbing from PVC plastic waste burning. Fine particulate, acid gases and NOx removal on munitions destruction. Cleanup of all pollutants from liquid waste incinerators and other high temperature destruction processes. Acid and particulate emissions from electronic board and metals recovery operations.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Dewatering of explosive / corrosive media for waste management industry

    In customer-specific chemical processes, explosive and corrosive solvents are used to systematically change the stock characteristics of e.g. pulp or plastic which calls for appropriate measures to protect the machine as well as the environment. To meet such requirements, BELLMER KUFFERATH Machinery has adapted their screw presses` proven functional concept to suit special requirements, such as:

    By BELLMER KUFFERATH Machinery GmbH based in Düren, GERMANY.

  • Refuse Derived Fuel (RDF) & Solid Recovered Fuel (SRF)

    A full-scale Gasplasma® plant can make its own RDF from MSW/Commercial Waste. The waste is brought directly into a fuel preparation hall at the front of the building. Inside the fuel preparation hall there is industry standard equipment that can recover glass, metals and hard plastics from the wastes for recycling. The remaining waste is then dried and shredded to make a Refuse Derived Fuel (RDF) for the Gasplasma® energy from waste process. Clients who already produce RDF may not require a fuel preparation hall. APP can design a plant without this facility, accepting the RDF directly from the client. Secondary Recovered Fuel or Solid Recovered Fuel (SRF) is often confused with Refuse Derived Fuel because they are similar in nature. However, SRF is produced to reach a clearly defined standard such as CEN/343 ANAS whereas RDF is not.

    By Advanced Plasma Power (APP) based in Swindon, UNITED KINGDOM.

  • Premium

    Metal Sorting - Electronic Scrap Sorting

    The recycling of disused and obsolete electrical and electronic equipment is gaining more and more importance world-wide. Waste electrical equipment is an incredibly rewarding source of raw materials. In Waste electrical equipment, up to hundreds of times more precious metals can be found per ton of material than in the primary source of raw material, ore. The goal for TITECH and the industry as a whole is to utilise electronic scrap recycling and sort out pollutants on one hand and profitable components in high purity on the other. For electronic recycling purposes, the EU classifies W??? into 10 categories. After separate collection of TVs, fridges and so on, they are processed and sorted in electronic scrap recycling systems. The average content of thus gained materials is as follows: metals (50%), plastics (30%), glass (10%) and other materials (10%).

    By TOMRA Sorting (TITECH) based in Mülheim-Kärlich, GERMANY.

  • Premium

    Waste Compaction for the Manufacturing Industry

    HSM has a wide range of balers for use in industrial and manufacturing settings. Many materials including, cardboard, paper, plastic packaging, PET Bottles/other rigid plastics and drinks cans can be successfully baled using one of HSM’s high specification balers.

    All of the models within HSM`s range of industrial balers are used for baling recovered recyclable materials into bales suitable for transporting to a recycling facility for processing. HSM balers for use in industrial or manufacturing settings are designed to allow maximum flexibility of working for the operator in that they can function on their own or as an integral part of a wider recovery system.

    Whether it’s a vertical, horizontal or fully automatic, channel baler that is required, HSM has a range of solutions for every location, and able to fit in to the available space.

    By HSM GmbH + Co. KG based in Frickingen, GERMANY.

  • Premium

    Waste Compaction for the Depackaging Systems for Food Waste Industry

    The food and drink industry relies on modern packaging materials and systems to extend the life of its products and to make them easy to store and transport. Inevitably during these processes wastage occurs whether this is when food expires, through faulty packaging or is otherwise unfit for sale or consumption, disposal can become a costly burden for the food manufacturers or retailers.

    HSM depackaging equipment solution, the universal recycling presses (URP’s) are designed to recover organics from food waste and deal with a variety of materials from plastic wrapping and containers, to wax-coated cardboard and even metal cans.

    HSM depackaging machines make it possible to efficiently recycle and recover organic and packaging waste from food waste.

    For more information or to discuss your baling needs, please contact us!

    By HSM GmbH + Co. KG based in Frickingen, GERMANY.

  • Premium

    Waste Compaction for the Food and Beverage Industry

    The food and drink industry relies on modern packaging materials and systems to extend the life of its products and to make them easy to store and transport. Inevitably during these processes wastage occurs whether this is when food expires, through faulty packaging or is otherwise unfit for sale or consumption, disposal can become a costly burden for the food manufacturers or retailers.

    HSM depackaging equipment solution, the universal recycling presses (URP’s) are designed to recover organics from food waste and deal with a variety of materials from plastic wrapping and containers, to wax-coated cardboard and even metal cans.

    HSM depackaging machines make it possible to efficiently recycle and recover organic and packaging waste from food waste.

    For more information or to discuss your baling needs, please contact us!

    By HSM GmbH + Co. KG based in Frickingen, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you