Only show results available in Virginia? Ok

plastic-to-hydrocarbon oil Applications

  • Premium

    Determination of oil (petroleum hydrocarbons) in water

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Measurement of C1-C5 hydrocarbons for oil & gas exploration.

    The PetroAlert Model 8900 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing fast analysis of C1-C5 hydrocarbons required in Mud Logging for Oil & Gas exploration. The PetroAlert Model 8900 uses a dual column configuration with timed backflush to vent which is used to strip off moisture and C6+ hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed sample volume is carried to the pre-cut column. Backflush of the pre-cut column is timed from sample injection so that only C1-C5 hydrocarbons are eluted from the pre-cut column to the analytical column. C6+ hydrocarbons on the pre-cut column are then vented. C1-C5 hydrocarbons are separated on the analytical column and elute to the flame ionization detector (FID) for analysis.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Monitoring of oil and petroleum hydrocarbons in cooling water

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Hydrocarbons monitoring

    Hydrocarbons are a family of organic chemicals consisting of carbon and hydrogen atoms arranged in a variety of ways. Hydrocarbons are found naturally in crude oil and are released into the environment with its combustion (power plants, home heaters etc).

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Alkane (hydrocarbon) gas measurement for mudlogging in oil & gas drilling rigs

    The need for operator and maintainance intensive gas chromatograph (GC) analyzers was eliminated. Customer can now deploy all-optical, unattended sensor system for monitoring the composition of hydrocarbon gases (C1-C5) exiting the well bore which provides crucial information about the drilling formation that would save time and money.

    By MKS Instruments, Inc. based in Andover, MASSACHUSETTS (USA).

  • Oil Water Separator for Hydrocarbon Recovery from Flowback, Produced Brinewater

    Hudson Oil Water Separators can be used to reclaim more oil and hydrocarbons from flowback, produced water, brine water or waste water before sending this value stream to disposal/injection sites. To enhance recovery even further package a Hudson Separator with a Wilsa ElectroWaveTM Conditioner for ultimate results. Up to 99.999% of oil and hydrocarbons recovered, including emulsified oils. Please call us today to evaluate your recovery potential.

    By Hudson Industries based in Warren, OHIO (USA).

  • Plastic bag to fuel oil machine

    Plastic bag is a most important source of plastic waste, which is called white trash. So we must come up with a method to recycle plastic waste to improve the environment. As a leader in the field of recycling plastic waste, Doing group has a special machine that aims at plastic bag recycling. This plastic bag recycling machine can produce fuel oil from waste plastic bags. The oil has many applications. It can be widely used as fuel oil in industries such as steel, iron and boiler factories, ceramics, power or chemical industries or hotels, restaurants etc. or used for generators to get electricity. It also can be refined to diesel by pyrolysis oil distillation plant, which can be used in the low speed engine, such as digging machine, road roller, loading machine etc. or sold directly at a higher price. The Plastic bag to fuel oil machine also has two other end- products, carbon black and a little combustible gas. Contact: Ms Bonnie www.wastetireoil.com Phone: +86 15893800169

  • Continuous process waste plastic to oil recycling

    continuous waste plastic to oil Solution: Continuous pyrolysis plant Function: Recycling waste plastic to fuel oil Applicable raw material: ABS / Mixed plastic, PE/PP/PS Plastic, PET Plastic not recommended Output: 50-90% fuel oil ,10-50% carbon blakc Heating fuel: Coal / wood/ fuel oil / gas Pyrolysis plant land size: 25x20m Reactor design: Mutiple reactors with internal rotating Reactor material: Q245/ Q345 Boiler plate

  • Premium

    Monitoring of hydrocarbons in bilge water

    The Situation

    Various processes onboard ships, such as machinery wash-down, maintenance, and leakage, generate oily wastewater. This contaminated water flow collects in the bilge of the ship. Marine diesel, lubricating oils, grease, as well as other contaminants may be present in bilge water. The bilge water is discharged overboard, with oil and grease concentrations in the discharged water limited by national and international regulations.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Monitoring petroleum hydrocarbons in wastewater

    The Situation:

    A wastewater treatment company operated an oil/water separation facility on a multi-acre industrial site in Northern California. Its purpose was to recycle oil products for profit while at the same time providing a wastewater treatment service for industries based in Northern California.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Plastic shredding for the plastic recycling industry

    Plastic materials mainly consist of crude oil and are therefore in demand for environmentally friendly recy-cling processes for the conservation of resources. In order to live up to the numerous applications and indi-vidual expectations of our customers, LINDNER reSource fully concentrates on processing of plastic materials in the Lindner group of companies.

    By Lindner-Recyclingtech GmbH based in Spittal/Drau, AUSTRIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you