Only show results in Virginia? Ok

pm2.5 standard Applications

  • Air monitoring for laboratories

    Many of the air quality analyses can be performed with standard laboratory consumables, such as traditional filter papers. However, some analyses require materials with specific features, for example filters with low metal levels.

    Common air monitoring applications include:

    • Air quality testing of ambient environment and emissions. Includes particulate monitoring methods such as PM2.5 and PM10, and chemical analysis such as heavy metals determination.
    • Asbestos sampling and analysis

    By GE Healthcare Life Sciences based in Marlborough, MASSACHUSETTS (USA).

  • Premium

    Paper sorting for the paper industry

    The paper industry has high standards for de-inked paper. REDWAVE­ is able to achieve these requirements with the highest precision.

    By REDWAVE a division of BT-Wolfgang Binder GmbH based in Gleisdorf, AUSTRIA.

  • Premium

    Industrial air pollution control for the electronics and electrical industry

    The world`s appetite for electronic devices - from simple household appliances to sophisticated computers - has led to rapid growth of both these industries. Typically for the electronics industry, there are large waste gas streams (up to 400,000 Nm³/h) with relatively low concentrations of different solvents. The waste gases mainly occur in coating, cleaning and etching processes during the production of semiconductors, CDs/DVDs, Blue-ray discs, DVTs, TFT-LCD and plasma displays. The electronics industry has important standards to meet regarding environmental protection. CTP complies with these requirements: From zero emission goals, to installations on the roofs of production facilities.

  • Premium

    Baseline® 9100 Residual Solvent Analysis — Ethanol, Isopropanol, and Acetone

    MOCON’s Baseline® Series 9100 Gas Chromatograph equipped with a photoionization detector (PID) provides a quick, cost effective quantitative analysis of IPA and acetone in air at levels in the ppb and sub-ppb range with no preconcentration necessary. Isopropanol and acetone are detected and accurately quantified to sub-ppb levels in under 3 minutes with ethanol producing no interference. The instrument is sensitive to below 5 ppb for both IPA and acetone employing the MOCON Baseline® standard PID or 0.1 ppb using the MOCON Baseline® high sensitivity PID.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Determination of the mercury concentration in naphtha

    Introduction

    The mercury concentration in crude oil and petroleum products can vary in a wide range of less than 0.1 ppb to dozens ppm. Direct mercury determination in crude oil and petroleum products at the range above 5 ppb is covered by ASTM D7622-10(2015) "Standard test method for total mercury in crude oil using combustion and direct cold vapor atomic absorption method with Zeeman background correction". Mercury determination in naphtha and light petroleum products (condensate, gasoline and diesel fuel) at a level below 5 ppb is a vital problem for the oil refining and petrochemical industry. Complex organic matrix impedes conventional quantitative analysis for mercury.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Instruments and analyzers for measure spectral irradiance of sun simulator

    Sun simulators are available in different classes indicating the performance characteristics by the combination of three letters (A,B or C) (according to IEC 60904, JIS 8912 and ASTM E 927-05). Each letter represents respectively the spectral match with the solar spectrum (1000 W/m2, AM 1.5), uniformity of the light field and temporary stability. Class AAA are considered as most accurate and have an ideal spectral match between 0.75 and 1.25, max. 2.0% non-uniformity and 0.5% nonstability according to the IEC standard. The ideal spectral match is divided in spectral bands. Those represent a certain energy quanta of the total spectrum allowing a 25% variance in that particular range.

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Combination water jet cleaning / sewer cleaning

    We have numerous requests each year for high-pressure sewer cleaning machines. We are in the unique position to be able to offer “combination” water blast/sewer cleaning units that provide more versatility than a standard 2,000 psi or 3,000 psi (140 to 206 bar) sewer cleaner.

    By NLB Corp. based in Wixom, MICHIGAN (USA).

  • Industrial solutions for water reuse optimization

    Problem: With rising water costs, greater water scarcities and increasing environmental compliance regulations, reuse of water is becoming widely practiced in the manufacturing industry. For most industries, some form of treatment is required to ensure water meets standards for reuse.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • e-scrap recycling System

    PCB Boards and E-scrap Recycling Plant 3.Why buy MINGXIN's E waste(PCB) Recycling plant ? Get the metal separated from waste circuit board through crushing and air separation process. No incineration and pollution. compliance with EHS standard, no harmfulness to workers, eco-friendly solution for E waste recycling. The plant has 5 advantages: A. The coarse crush can grind baseplate and separate electronic component.. B. National Environment Protection Standard achieved. No dust leak and no secondary pollution . C. Low energy consumption but high production. D. High metal recovery rate which reaches 97%-99%. Metal content in on-metal powder is less than 1%. E. Patent number: ZL02247015.8

    By Jiangxi Mingxin Metallurgy Equipment Co.,Ltd. based in Shicheng County, CHINA.

  • End Point Detection

    Hiden Ion Milling Probe – End Point Detector The only dedicated end point determination tool for ion etch control and optimum process quality. End point Analysis. Target Impurity Determination. Quality Control / SPC. Residual Gas Analysis. Leak Detection The IMP is a differentially pumped, ruggedized secondary ion mass spectrometer for the analysis of secondary ions and neutrals from the ion mill process, featuring: High Sensitivity SIMS / MS with Pulse Ion Counting Detector. Triple filter Quadrupole, 300 amu mass range is standard. Differentially Pumped Manifold With Mounting Flange to Process Chamber. Ion Optics with Energy Analyser and integral ioniser. Penning Gauge and interlocks to provide over pressure protection. Data System with integration to the process tool. Stability (less than ±0.5% height variation over 24 h). MASsoft control via RS232, RS485 or Ethernet LAN. Programmable DDE, Parallel Digital I / O, RS232 Scripting Communication

    By Hiden Analytical Ltd. based in Warrington, UNITED KINGDOM.

  • Scrap Metal Baler

    1. Product Name: Y83-250 Scrap Metal Baler For Sale 2. Application: Y83-2500 Scrap Metal Baler For Sale is suitable for the steel plants, recycling companies, ferrous & non-ferrous metal smelting industry to compress metal scrap(steel parings, waste steel, waste copper & aluminum, waste stainless steel, scrap from discarded automobiles) into acceptable furnace charges of cuboids, cylinders, octagons & other shapes, so as to reduce the cost of transportation & smelting, to speed up furnace charging. 3. Metal Baler Specifications: Nominal force (kN):2500 Dimension of compress room (L*W*H) (mm):2000*1400*900 Bale dimension (L*W*H)(mm):(400-700)*450*450 Bale density (kg/m3 ):>1800 Capacity (kg/h):3500-4500 Single cycle time(s):<160 Power (kW):60 Bale discharging and operation:Turn-out, hand valve control 4. Quality: This metal baler apply to ISO9001: 2000 standard. 5. Service: 1) One year guarantee and lifelong maintenance; 2) Any problem, you can call us directly.

    By Jiangsu Wanshida Hydraulic Machinery Company based in Jiangyin, CHINA.

  • Wastewater solutions for municipal sewer control

    Problem: A significant portion of the operational costs of a conventional municipal wastewater treatment plant employing an aerobic biological treatment unit comes from electricity costs associated with aeration. In many cases, the aeration rates are kept at the maximum level to ensure that the plant’s effluent is in compliance with the regulations. The critical parameter for regulatory purposes and treatment efficiency, BOD, takes 5 days to measure through standard methods providing almost no value to the plant operators in terms of adjusting aeration rates and chemical dosing.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Deep Water Offshore & Offshore

    - including PSV & Salvage packages In the rugged and harsh environment of the offshore, DESMI is the market leader for boom, recovery systems, burn kits and storage systems for oil spill response. The world renowned Ro-Boom, which is available up to 3.5 metres in height, is unsurpassed in its manufacture, operation and longevity. It can be supplied in containerised, standard systems with DNV certification. Ideal for deep water offshore operations. Ro-Boom continues to set the standards for containment and deflection in the challenging offshore applications. In addition, we have developed the Hi-Seas Speed-Sweep – a sweep system that can be operated effectively up to 3 knots. This is a heavy duty system that is manufactured from Ro-Boom material and can be simply connected to existing boom systems to increase the area of influence.

    By DESMI A/S based in Noerresundby, DENMARK.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you