Only show results available in Virginia? Ok

point-of-use system Applications

  • End Point Detection

    Hiden Ion Milling Probe – End Point Detector The only dedicated end point determination tool for ion etch control and optimum process quality. End point Analysis. Target Impurity Determination. Quality Control / SPC. Residual Gas Analysis. Leak Detection The IMP is a differentially pumped, ruggedized secondary ion mass spectrometer for the analysis of secondary ions and neutrals from the ion mill process, featuring: High Sensitivity SIMS / MS with Pulse Ion Counting Detector. Triple filter Quadrupole, 300 amu mass range is standard. Differentially Pumped Manifold With Mounting Flange to Process Chamber. Ion Optics with Energy Analyser and integral ioniser. Penning Gauge and interlocks to provide over pressure protection. Data System with integration to the process tool. Stability (less than ±0.5% height variation over 24 h). MASsoft control via RS232, RS485 or Ethernet LAN. Programmable DDE, Parallel Digital I / O, RS232 Scripting Communication

    By Hiden Analytical based in Warrington, UNITED KINGDOM.

  • Premium

    Marine image profiling using our unique SuperSting Marine system

    Marine image profiling using our unique SuperSting Marine system.

    By Advanced Geosciences, Inc. based in Austin, TEXAS (USA).

  • Oxygen Generating Systems for Use with Ozone Generators

    Twice the output of air-fed systems . . . As customers demand more ozone for less capital investment, oxygen is quickly replacing air as the industry’s preferred feed gas. Ozone output normally doubles when 93% oxygen is fed into the corona discharge.

    By Oxygen Generating Systems Intl. (OGSI) based in North Tonawanda, NEW YORK (USA).

  • Premium

    Determination of phenoxycarboxylic acid herbicides in water using high performance capillary electrophoresys method using Capel systems

    The method allows determination of herbicides classified as phenoxycarboxylic acids, specifically: 2,4-dichloro-- phenoxybutyric acid (2,4-DB), 2,4-dichlorophenoxypropionic acid (2,4-DP, Dichlorprop), 2,4-dichloropheno-- xyacetic acid (2,4-D), and phenoxyacetic acid in samples of natural, potable and treated waste water by capillary electrophoresis. 

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Determination of hesperidin and naringin in juices using CAPEL-105M capillary electrophoresis system

    The method is intended for determination of hesperidin and naringin using capillary electrophoresis technique in order to reveal adulteration of juices. These components are tested in citrus juices, concentrated juices, nectars, juice-containing beverages, and fruit sauces that are produced primarily from oranges, grapefruits, tangerines, lemons, and limes. 

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Cooling Towers and Process Water System Cleaning Applications Using Hydrogen Peroxide

    The unique properties of hydrogen peroxide (H2O2) make it a good technology for keeping cooling loops, process water loops and heat exchangers clean from fouling that can occur due to various contaminants in the water. Hydrogen peroxide works well in removing organic fouling on surfaces through mechanical means and in specific applications through biocidal mechanisms. Hydrogen peroxide can be used in a shock treatment mode where it is fed based on a timer set-up. It can also be used occasionally at higher concentrations for maintenance cleaning purposes of fouled heat exchangers, cooling water loops and process water loops. Performing an occasional shock cleaning of a heat exchanger with hydrogen peroxide can remove buildup from surfaces and can result in improved heat transfer efficiency. By removing surface fouling, hydrogen peroxide may also improve the efficiency of other biocides such as bleach, bromine and non-oxidizers.

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Premium

    Industrial wastewater solutions for the used rinse water

    Cleanliness is the most important success factor when cleaning parts and surfaces. As it depends heavily on the quality of the rinse water used, looking after the individual rinses requires particular attention. Leading companies are already using vacuum distillation systems to treat used rinse water. And you too can benefit, because our VACUDEST vacuum distillation systems enables you to achieve top cleaning quality.

    By H2O GmbH based in Steinen, GERMANY.

  • Cloud software solutions for fleet operators using fuel

    The top run fleet operators use Titan software to get them down the road more efficiently. Whether it`s monitoring tank alarms in real-time, optimizing inventory across a network of both USTs & ASTs, or more efficiently managing fuel-system compliance, Titan makes heroes of fuel and environmental managers in the rent-a-car and transport industry. For starters, Titan mitigates your core environmental risks, arming you with a central dashboard and effective management tools that keep you on top of it all. This includes ATG alarms, release detection data, testing results, inspections, NOVs, and environmental-related forms, photos, and documents. Next, we hand over the key to responsible ATG network management, with on-demand tank inventory and remote gauge configuration to ensure you can effectively optimize your in-ground and above ground fuel. Finally, Titan streamlines your maintanance and work order process, linking you with site-level employees, techs, vendors, and field team members to centrally manage all facility requests in one system. In short, Titan software helps you run a better, more efficient rent-a-car or commercial fleet operation.

    By Titan Cloud Software Company, LLC based in Brentwood, TENNESSEE (USA).

  • US Peroxide Rapid Response

    US Peroxide (USP) is uniquely positioned to rapidly respond to your environmental treatment challenges. USP combines experienced applications and equipment field support with a large inventory of storage systems and pumping modules to respond quickly to time sensitive water and wastewater treatment situations. Advantages With considerable inventory of tank and pump systems as well as our partnerships with leading chemical suppliers, USP can mobilize chemicals and equipment quickly to respond to your rapid response needs, often within 24 hours. We offer dosing options are designed to meet all safety requirements and sized to meet your specific process and dosage rates requirements. Our Applications Engineers and Equipment and Engineering Services teams will provide timely and thorough applications assistance and technical support during the entire project. Download the Rapid Response Solutions Brochure (PDF) Sample Applications Examples of where our Rapid Response Program has successfully addressed treatment challenges include the following: Temporary application of hydrogen peroxide as a source of supplemental dissolved oxygen in biological treatment systems during periods of excessive BOD loading Hydrogen peroxide pretreatment of high strength wastewater to reduce toxicity or BOD/COD prior to biological treatment Emergency hydrogen peroxide treatment of lagoons or ponds to control hydrogen sulfide and other odors Shock cleaning of cooling water systems for biofouling and slime control

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Determination of Additives in Beverages using Ascentis Express Columns

    Beverages, such as sodas and energy drinks, can include a number of polar ingredients, which are easily soluble in the water matrix of the drinks. These ingredients include sweeteners (sugars and sugar substitutes), caffeine, vitamin supplements, amino acids, organic acids, and plant extracts. Because the analytes are already in solution, there is no need for extensive sample preparation. Dilution followed by direct injection into an HPLC is typically suitable. In this article we present two beverage applications using Ascentis Express HPLC columns. Ascentis Express columns offer faster HPLC on any system. One benefit is their ability to produce the resolution, efficiency, and speed on conventional HPLC systems that is associated with the use of sub-2 micron columns on a UHPLC system, without generating high backpressure. Column chemistries (RP-Amide and HILIC) were selected for this article based on their enhanced performance with polar compounds in comparison to C18.

    By MilliporeSigma based in Bellefonte, PENNSYLVANIA (USA).

  • Premium

    Industrial wastewater solutions for clearcat crystal-clear distillate from used coolant emulsions

    Metal-working factories generate a lot of oily effluent as a result of manufacturing processes. The coolant emulsions tailored to the individual application contain oils, waxes, greases and preservatives, as well as a cocktail of ingredients to improve product properties. The emulsions used must not be discharged untreated into the drain system or open bodies of water; they must be disposed of at high cost.

    By H2O GmbH based in Steinen, GERMANY.

  • Automated solutions for the municipal sludge recycling using dredges

    LWT`s dredging systems can be used for municipal sludge recycling applications. Sludge is mixed with compost and used in nurseries, sod farms, and agricultural applications.

    By Liquid Waste Technology LLC (LWT LLC) based in New Richmond, WISCONSIN (USA).

  • Premium

    Water Treatment for Drinking Water

    There are many different drinking water applications that are appropriate for AdEdge Technologies’ solutions. Small community water providers, both private and public, have found the AdEdge modular or packaged units to be the correct answer to a variety of contaminant issues. Our systems also provide safe drinking water for dairy farms and other agricultural applications.  Individual residences use POU (point-of-use) and POE (point-of-entry) systems to ensure the quality of their water.

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you