Only show results available in Virginia? Ok

pollution monitoring equipment Applications

  • Air Quality Monitoring Equipment for Industry

    Signal manufacture a wide range of Air Quality Monitoring equipment, from reference method integrated systems down to battery powered indicative units.

    By Signal Group Ltd based in Camberley, UNITED KINGDOM.

  • Pollutant monitoring for the manufacturing industries

    Ormantine`s air monitoring equipment is widely used to monitor both indoor and outdoor air quality. Continuous development allows us to provide equipment for a broad range of applications, covering short-term and long-term monitoring. Pollutants can be detected even at very low levels – limits of detection are typically in the low parts per billion (ppb) range. Ormantine USA`s many solutions have applications from personal exposure monitoring to long term fence line monitoring studies.

    By Ormantine USA Ltd., Inc. based in Palm Bay, FLORIDA (USA).

  • Air monitoring equipments for laboratory analysis

    Our purpose built environmental laboratory provides accurate and efficient analysis, specialising in the determination of gaseous pollutant concentrations. Other processes can also be performed to meet the specific needs of our customers.

    By Gradko International Ltd based in Winchester, UNITED KINGDOM.

  • Environmental Monitoring

    Environmental monitoring is becoming more important every day in local, national and international policies, showing the environmental awareness demanded by society.

    This fact gives rise to an increase in the amount of legislation that obliges companies to law enforcement. Thus, the necessity of making more pollutants controls means high analysis expenses to the companies, which need to subcontract this service.

    Although applications in this area advance, there is still a clear demand to get new portable and versatile analysis systems for many different application fields such as pollution in environmental or waste waters, monitoring nutrients in agricultural or horticultural water as well as general process control in chemistry industry. Because of the number of enviromental analysis required, there is a need for screening and monitoring measurements of these compounds at contaminated areas.

    Traditional monitoring techniques are typically based on laboratory analysis of field-collected samples that require considerable effort and expense, and the sample may change before analysis. Moreover, the equipment currently available is too large and expensive and it cannot be made portable.Alternatively, microfluidic and electrochemical sensor technologies can contribute to the development of new portable monitoring systems, complementing standard analytical methods for different environmental monitoring applications.In this way, the decentralization and integration of all those typical analyses is the paramount importance in order to reduce cost, simplify the analytical process and make more accessible these technologies to end-users. The development of portable, robust, and accurate Lab-on-a-Chip systems to monitor priority compounds such as contaminants, explosives, chemical warfare agents, inorganic and organic ions is a demand of modern society. Portability allows analyses to be carried out outside of the laboratory, minimizing the risk of contaminating the sample and leading to a faster response time at a lower cost.

    Thus, MicruX solutions and technologies open the gate to develop portable and esay-handly Lab-on-a-Chip devices in order to improve pollutants in-situ analysis in a very economic and efficient way.

    By MicruX Technologies based in Oviedo, SPAIN.

  • Air monitoring equipments for workplace and personal exposure monitoring

    Many occupations involve the use of hazardous substances or processes, where pollutants may be ingested, inhaled or absorbed through the skin. General ambient pollutants can also have health implications in otherwise non-hazardous workplaces. Occupational exposure limits regulate many pollutants based on an eight-hour working day. Personal exposure assessments can be made over an eight-hour period (Time Weighted Average (TWA) exposure) using our simple to use monitoring equipment.

    By Gradko International Ltd based in Winchester, UNITED KINGDOM.

  • Air monitoring equipments for outdoor & indoor air quality

    Gradko’s ambient air monitoring equipment is widely used to monitor both indoor and outdoor air quality. Continuous development allows us to provide equipment for a broad range of applications, covering short-term and long-term monitoring. Pollutants can be detected even at very low levels – limits of detection are typically in the low parts per billion (ppb) range.

    By Gradko International Ltd based in Winchester, UNITED KINGDOM.

  • Airport Environmental Monitoring

    Water pollution from airport run-off is increasingly coming under public and government scrutiny. As environmental regulations tighten, the ability to monitor for aviation fuel contamination from runway run-off has become essential.

    Monitoring sites at airports can be extremely challenging often with no power or telephone lines available and with limited access for maintenance. Chelsea’s robust UviLux Hydrocarbon Sensor with its low power consumption and high accuracy is ideally suited for this application. Installed at various locations around the airport, deployed with it’s own integrated anti-biofouling system, utilising the GSM network, the monitoring sites send data to a secure ftp site, where any internet enabled device can access the data. In this way the systems act as any early warning system allowing any hydrocarbon discharge to be detected in real-time.

    Optional environmental monitoring features include remote control to allow the user to turn equipment on and off, change the sample rate and detection range. There is also a facility to allow SMS text and email alarm notifications triggered by user-defined set-points together with customised web pages, data displays and automated data downloads via an ftp server.

    Airport runoff can contain high concentrations of various pollutants, in particular polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs), the environmental levels of which have to be monitored. An understanding of the magnitude of contamination due to airport runoff water is important for the effective management of airport infrastructure. Chelsea’s robust UviLux Hydrocarbon Sensor with its low power consumption and high accuracy is ideally suited to the airport environment.

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • Monitoring of VOCs in Porewater

    Monitoring VOCs in porewater in the unsaturated zone is now possible.

    Sorbisense regularly offers new options for using the patented Sorbicell, which is used to monitor surface water, wastewater and groundwater.

    The latest is almost as “ground-breaking” as the SorbiCell itself. Until now it has been difficult, if not impossible, to directly monitor for volatile substances in pore water in the unsaturated zone. But the environmental consultancy firm Ejlskov A/S in Aarhus combined the use of Sorbisense sampling equipment with the proven technology of soil water samplers. With this combination, a practical new method is made available, which allows for monitoring the presence of porewater-dissolved VOCs above the groundwater table. This provides a significantly improved basis to define and determine the leaching risk to the groundwater, and thus allows for better and more cost-efficient decisions to prevent the pollution in reaching the groundwater.

    A simple construction with multiple options

    The application uses SorbiCell VOC combined with suction cells, soil water samplers. When installed correctly, and applied with the correct procedures, the suctions cells extract capillary bound water from the soil matrix. The system demands no other resource than a container that is put under vacuum. The vacuum in the container then ensures a flow through of the Sorbicell over a period of time, fx. 2-3 weeks. The method is highly suitable for monitoring a site over longer periods of time.

    By SORBISENSE based in Tjele, DENMARK.

  • Premium

    Air sampling & monitoring systems for energy/utilities industry

    Finding efficient ways to generate, deliver and consume energy resources while reducing pollution is an ongoing quest for the Energy & Utility Industries. HI-Q has developed instrumentation geared toward monitoring emissions and the dispersal of pollutants from power plants and industrial facilities. HI-Q base-line & stack sampling equipment has been used in studies to identify and track the spread of pollutants around the globe.

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

  • Agricultural, Storm and Highway Runoff

    The ability to collect useful data about sediment transport and other pollutants closely coupled to SSC (such as nutrients, e-coli, phosphates and nitrates) is dependent on the timing and frequency of manual grab samples during run-off events. Most sediment and pollutant is transported during a small number of storm events which are infrequent and unpredictable. When they do occur, trained personnel or the proper equipment may not be available to collect grab samples. An automated pump sampler can eliminate the need to sample manually, but for the expense of a rechargeable power system, the autosampler, and possibly a datalogger and a typical turbidity probe, you’re no better off. With an automated pump sampler driven by the DTS-12 digital turbidity sensor and controlled by the Axiom H2 datalogger, you obtain a better understanding of the water’s quality, while taking a minimum number of samples, reducing site visits and saving lab analysis costs.

    By FTS based in Victoria, BRITISH COLUMBIA (CANADA).

  • Premium

    Gas monitoring instruments and systems for stack testing according to EPA test method 320

    The United States Environmental Protection Agency (EPA) has two stack testing methods for FTIR gas analyzers. Method 320 is an FTIR method for measuring wide range of organic and inorganic pollutants. Method 321 is a specific version for measuring hydrogen chloride HCl at cement kilns producing Portland cement. These methods define a quality assurance and control processes for verifying the accuracy of the results. The requirements for analytical equipment and software are defined on 40 CFR Part 60 Appendix B Performance Specification 15. Gasmet™ Gas Analyzers and Calcmet™ software have been designed to take the requirements of the performance specification into account.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Air Quality & Emission Management Issues

    • Development of documents substantiating the volumes of emissions of pollutants into the air from stationary sources for enterprises, organizations and private entrepreneurs; • Inventory of air pollutants emissions from stationary sources; • Preparing, maintenance support of documentation for receiving a Permit for Emissions of Pollutants into the Air from Stationary Sources (PEPASS) *, issued by the Departments of Environment and Natural Resources of the regional state administrations of Ukraine; • Development and registration of dust and gas cleaning equipment passports; • Monitoring of the dust and gas cleaning equipment effectiveness; • Quality control of the implementation of projects of Maximum Permissible Emissions (MPE); • Calculation of fees for environmental pollution (environmental tax) on the basis of amount of emission of pollutants into the air.

    By PP `Tehnologia O` based in Vinnytsia, UKRAINE.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you