Only show results in Virginia? Ok

power generator fuel Applications

  • Pumping solutions for power generating

    Fluids Handled - Lubricating oils, Fuel Oil, Fuel Flow Dividers.

    By Hydro Prokav Pumps (India) Pvt. Ltd. based in Sidco, INDIA.

  • Secundary air flow measurement for power generation industry

    Secondary Air Flow Overview: The need for accurate, repeatable & reliable combustion air measurements in power generation plants is critical to efficient operation and safety throughout the entire facility and processes. Accurate secondary air flow measurement to the burners is critical for maintaining the proper air to fuel ratio, result­ing in more complete and stable combustion, better performance and lower emissions. Coal-fired power plant applications pose a number of challenges to obtaining these critical flow measurements including large ducts, limited metering runs, poor velocity and temperature profiles, vibration and high temperatures.

    By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Evaporation technology for power industry

    EVALED evaporators treat or minimize wastewater from the Power Generation Industry. Flue gas desulfurization effluents require different kinds of treatments depending on the type of fuel, water sources, and environmental regulations.

    By EVALED-Evaporator based in Zoppola (PN), ITALY.

  • Energy and Fuels from Commercial Waste

    Commercial Waste is similar to Municipal Solid Waste although it tends to have more biodegradable products. Commercial waste is defined as all wastes created by commercial businesses. This can include, but is not necessarily limited to, solid or liquid wastes originating from offices, stores, markets, restaurants, shopping centres and other enterprises. We receive Commercial waste into the Materials Recycling Facility (MRF) at the front end of the Gasplasma® energy from waste plant. Any recyclable materials are recovered and the remainder is dried and shredded to make Refuse Derived Fuel (RDF). The RDF is used as fuel in the Gasplasma® plant to generate clean, renewable power and heat.

    By Advanced Plasma Power (APP) based in Swindon, UNITED KINGDOM.

  • Premium

    Recycling waste oil into a resuable fuel for waste & recycling industry

    With the increasing requirement to reduce or recycle products, used lubricating oils obtained from automobiles, large plant equipment, generators etc. are collected and sent to a facility to recycle the waste oil product into a reusable fuel. This fuel can be used by power stations and other facilities to reduce their usage of original and more expensive fossil fuel.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Measurement solution for hydrogen fuel cell testing

    As the alternatives to fossil fuels for power generation and automotive power become more widespread and preferred, so has increased the research and testing of hydrogen gas in fuel cells. The hydrogen (H2) gas used in fuel cell has to be free of impurities in order to make the fuel cell as efficient as possible and so quality thresholds have been set in legislation. Such legislation as SAE J2719 provides hydrogen fuel quality standards for proton exchange membrane (PEM) fuel cell vehicles. If impurities above these thresholds are present in the H2 fuel then there is a risk of not only making the cell inefficient, but also unrecoverable back to its peak operating voltage as the fuel cell electrode becomes poisoned.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Plastic bag to fuel oil machine

    Plastic bag is a most important source of plastic waste, which is called white trash. So we must come up with a method to recycle plastic waste to improve the environment. As a leader in the field of recycling plastic waste, Doing group has a special machine that aims at plastic bag recycling. This plastic bag recycling machine can produce fuel oil from waste plastic bags. The oil has many applications. It can be widely used as fuel oil in industries such as steel, iron and boiler factories, ceramics, power or chemical industries or hotels, restaurants etc. or used for generators to get electricity. It also can be refined to diesel by pyrolysis oil distillation plant, which can be used in the low speed engine, such as digging machine, road roller, loading machine etc. or sold directly at a higher price. The Plastic bag to fuel oil machine also has two other end- products, carbon black and a little combustible gas. Contact: Ms Bonnie www.wastetireoil.com Phone: +86 15893800169

  • Water Monitoring and Flow Measurement Systems for Water Power

    Hydro power contributes to supplying approximately 3,5 per cent of electric energy generated worldwide. Its share in power generation from renewable resources lies at 18 per cent and will continue to grow as resources of fossil fuels are depleted. Hydro electric performance depends essentially on the usable altitude difference between upper and lower reservoir, and hence the resulting water flow. In order to use the “fuel” water in an optimal way, the flow velocity has to be monitored without any interruptions. Ultrasonic flow meters, flow sensors and clamp-on flow meters (OR clamp-on technology) are ideal for accurate flow metering and flow monitoring.

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

  • Premium

    Gas Detection and Analysis Equipment for Energy Generation Industry

    Recent decades brought a rapid growth in the global demand for energy. This trend is accurate for both developed as well as developing countries. Electrical power is a key source of energy for the vast majority of the world population. Although the usage of renewable energy is on the rise, the majority of electric power production worldwide is still based on conventional methods utilizing coal, oil and gas as its fuel to power the stations.

    By Opgal Optronic Industries Ltd. based in Karmiel, ISRAEL.

  • Premium

    Water treatment for power plants

    The process of electricity generation from fossil fuels such as coal, oil and natural gas is water-intensive. Between 40-50% of all water abstracted and used in developed countries is used in the generation of electricity. Thus, a reliable, abundant and predictable source of raw water supply to a power plant is a critical factor in site selection. Water supplies are required to provide various process waters for the following essential main purposes such as make-up water, cooling water for steam turbine condensers, and auxiliary plant cooling water.

    The primary application of modern water treatment technology is to maintain the integrity and performance of the power plant. Critical plant applications have water purity or conditioning requirements that must be adhered to for safe, reliable and efficient power generation.

    Experience has shown that integration of water technology treatments with power plant design can be very important in reducing operational problems and component failures 

    At power plant worldwide there are increasing limitations on water availability and environmental restrictions on discharges. This is expected to promote measures for water conservation and to have an increasing influence on water treatment decisions. At power plant, the recycling of internal wastewater streams can extend from the recovery of individual high-quality waste streams, which can be reused either directly or after only limited treatment, through to the development of fully integrated water/wastewater treatment systems for zero liquid discharge. However, the application of reuse schemes requires site-specific assessment, as not all waters may be viable options for recovery.

  • Premium

    Ice blasting technology for nuclear

    Applications of Coulson ice Blast in the Nuclear industry sector:

    (Please note that D2O can be used to make the ice thus not downgrading the D2O systems)

    Ice

    • General decontamination activities where hand washing is not satisfactory
    • Decontaminate tools / objects
    • Decontaminate Waste storage containers
    • Shut down maintenance cleaning
    • Decontamination of Steam Generator Heads prior to maintenance
    • Decontamination of fuel handling equipment
    • Decontamination of D2O storage drums
    • Decontamination of active storage cells

    By Coulson Ice Blast based in Port Alberni, BRITISH COLUMBIA (CANADA).

  • Energy and Fuels from Auto Shredder Residue (ASR)

    End of life vehicle processing recovers valuable recyclates and removes for recovery all pollutants from automobiles. After this process, the remaining vehicle is shredded for further treatment into smaller parts called Auto Shredder Residue (ASR) sometimes referred to as Auto Shredder Fluff or Car Fluff. ASR contains a mixture of all the different materials that make up the automobile, including metals, plastics, rubbers and textiles. This mixture of materials makes ASR a difficult waste to handle and potentially harmful to the environment. The Gasplasma® energy from waste process breaks down the ASR: Organic materials are transformed into a hydrogen-rich synthesis gas which is used to generate power / Inorganic materials are vitrified to become Plasmarok® /Any remaining ferrous and non-ferrous metals are recovered

    By Advanced Plasma Power (APP) based in Swindon, UNITED KINGDOM.

  • Waste tyre recycling fuel oil pyrolysis plant

    Waste tyre recycling the obtain thing as follows: 45%-55% fuel oil, 10%-15% steel wire, 30%-35% carbon black and 8%-10% flammable gas. You can get diesel from fuel oil by distillation plant. You can get a very high profit by disposing these wastes, and also it's helpful for improving the local environment, avoid garbage pollution . As the fuel material used in Cement factory, glass factory, ceramic factory, electric power factory, steel making factory, boiler factory, etc. 2. Final diesel come out from our distillation plant and deodorant & decolorant can be used in diesel generator. 3. Used in diesel powered cars, such as vans, truck, tractor, etc. 4. Use as heating oil, industrial and home. Carbon black : 1. Make it to briquette for fuel. 2. Used in rubber and painting factory after carbon black grinding to 200-4000 mesh. Contact: Ms Bonnie Phone: +86-371-5677 1821 +86 15893800169 Skype: bonniezhao2 Email: oilmachine@doinggroup.com www.wastetireoil.com

  • Premium

    Recycling Solutions for the energy and environment industry

    A comprehensive range of power generation technologies with environmental benefits. ANDRITZ technologies and processes for power generation utilize renewable fuels as well as traditional fossil fuels in efficient and environmentally appealing ways. In addition, there are purely environmental technologies in this category to meet the most stringent standards for emissions and effluent quality. From steam generators and hydropower plants, to air pollution control systems and wastewater treatment equipment, ANDRITZ offers a broad range of products for renewable energies as well as environmental and climate protection.

    By ANDRITZ MeWa GmbH based in Gechingen, GERMANY.

  • Material handling equipment for utilities industry

    Electric Power Generation, Fossil Fuel Electric Power Generation, Biomass, Alternative Fuels, Sewage Treatment Facilities, Waste Management and Remediation Services, Waste Treatment and Disposal, Solid Waste Combustors and Incinerators, Remediation Services, Materials Recovery, Facilities Waste Treatment and Disposal, Solid Waste Combustors and Incinerators, Remediation Services.

    By TerraSource Global based in St. Louis, MISSOURI (USA).

  • Air Quality Monitoring Equipment for Combustion Industry

    Boilers and Combustion Research A fuel source burning with oxygen to produce carbon monoxide, carbon dioxide and water is an equation from school science lessons but looking into the fuel temperature and oxides of nitrogen produced along with the CO, CO2 and O2 is work that is being carried out by boiler makers, power generators and all sorts of industrial applications every day.

    By Signal Group Ltd based in Camberley, UNITED KINGDOM.

  • Premium

    High quality gas sensor solutions for landfill

    State-of-the-art systems enabling easy monitoring of CO2 and CH4 gases. Capped Landfill Sites produce a range of gases, mostly methane and carbon dioxide. Legislation requires that these gases are safely removed from beneath the cap to avoid a physical explosion due to the build-up of pressure beneath the cap. Safe disposal usually entails burning such as flare stacks, internal combustion engines or by processing to produce Methane gas fuel. For large sites with access to power distribution infrastructure internal combustion engines are used to generate electricity which is fed into the local electricity grid. All of the above safe disposal process require the measurement of the Methane content (and in many cases the CO2 concentration). Edinburgh Sensors provide gas sensors for both Methane and CO2 that can be integrated into landfill gas processing systems enabling easy monitoring of these gases.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Filtration systems & solutions for energy sector

    Porvair Filtration Group have supplied a comprehensive range of filtration and separation products to the energy market for many years. We supply all major sectors of the power generation, distribution and supply industry, and our technology is used over a wide range of applications. These include, but are not limited to, the distribution of natural gas, conditioning and treatment of fuel oils, hydrocarbons and produced water, clean coal technologies, gasification and fuel cell technology. Our unrivalled experience and extensive product range ensures we can supply a fully engineered tailored solution for every application.

    By Porvair Filtration Group based in Fareham, UNITED KINGDOM.

  • Applications and Air Pollutants Removed in the Biomass Industry

    Flue gas particulate and acid gases from biomass and bagasse boilers. Removal of ethanol, CO2 scrubbers and yeast cells from fermenters.  Removal of ash particulate, tars, acid gases and ammonia from steam reformers, gasifiers, pyrolosis units and cooling of syngas streams to acceptable limits to enable use as a fuel source for power generation or as a feedstock for chemical products. For tar removal, combination technologies can be used including oil based scrubbing solutions to reduce waste water generation. Ethanol and yeast cell removal from fermenter off-gases. Methanol from processing operations. Hydrogen sulfide removal on landfill, digester and producer gases with regenerable chemistries. Odor control for biomass storage facilities including carbon monoxide removal in wood chip storage areas. 

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Waste tyre pyrolysis plant cost

    How to convert waste tyres to useful resources? Now, it is no longer a problem. With 18 years' experience in the field of tyre pyrolysis, and continuous research, development and improvement, Doing group provides the latest waste tyre pyrolysis plant which has reached a high level in technology. The Waste tyre pyrolysis plant adopts the new green pyrolysis technology. Through the use of the tire pyrolysis oil plant, waste tyres can be effectively converted to fuel oil, carbon black and steel wire. The oil from tyres plant can be widely used as fuel oil in industries such as steel and iron and boiler factories, ceramics, power or chemical industries etc. And it can be used for generators to get electricity. Carbon black can be used for making construction bricks with clay, and also can be used as fuel. Steel wire can be recycled into smelting plant. Phone: +86 15893800169 Contact: Ms Bonnie www.wastetireoil.com Skype: bonniezhao2 Email: oilmachine@doinggroup.com

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you