Only show results available in Virginia? Ok

power monitoring data Applications

  • Premium

    Noise monitoring solutions for data recording and analysis

    Brüel & Kjær provides a wide range of data recording hardware from pocket-sized units to 1000+ channel systems enabling you to: Save time with simple setup and an intuitive user interface. Save money by ensuring valid data. Record data with 1 to 1000+ channels. Raw time data is the key commodity for any measurements. Analysis can be performed at leisure, provided the actual data is safely recorded. For post-processing the data, PULSE Reflex software then provides powerful analysis capabilities. Simultaneous real-time analysis during data recording ensures that results can be checked, re-analysed and reported to other users – providing an important backup.

  • Premium

    Noise monitoring solutions for vibration testing

    Vibration testing is is used for aerospace and defence testing, ground transportation, transport simulation, package testing, altitude simulation and more. Our comprehensive range of LDS electrodynamic shakers are designed for vibration testing of devices of any size - from a semiconductor component to a complete satellite system, to see how it will stand up to real-world conditions. With an LDS vibration test system your shaker, power amplifier, vibration controller and even environmental chamber are not only controlled from one PC, they run under one software package. Combined with data acquisition systems and analysis software suites, Brüel & Kjær ofers the complete vibration testing solution to establish proof of quality according to national and international standards, such as DIN, ISO, BS, MIL, IEC and ASTM.

  • HCl Monitoring in Air

    Hydrogen chloride (HCl) is a colorless, sometimes slightly yellow, gas. It is an undesired environmental component that may be damaging to workers and the surroundings. Exposure limits have thus been established by industries to make sure that the workers operate in a safe environment. HCl monitoring is especially required for incinerators, coal-fired power plants, aluminum recycling and cement plants. Unisearch offers a reliable and easy-to-use HCl analyzer – the TDLAS-based LasIR system. Studies have shown that TDLAS equipment provides data that is more accurate than conventional gas monitoring equipment. When calibrated for HCl monitoring, TDLAS is able to detect this gas among other gases present in the area and provide continuous updates with regards to the changes in its concentration.

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

  • Ambient Continuous Metals Monitoring/ Fence Line Monitoring/ Source Identification

    The Xact® 625i combined with ADAPT software creates the industry's most powerful tool for high time resolution detection of airborne metals. The Xact® 625i measures trace metals at very low detection limits at time resolutions down to 15 minutes. The ADAPT package captures corresponding wind speed and wind direction data, then seamlessly integrates the measurements into wind regression analyses available at the touch of a button. This creates the most single most powerful fence line/ source identification instrument in the industry.

    By Cooper Environmental based in Beaverton, OREGON (USA).

  • Premium

    Laboratory Weighing - Interval Weighing

    Simply connect one or multiple balances to the LabX balance PC software, define duration and frequency of your measurements and LabX takes care of automatic data collection. All weighings can be activated from the balance touch screen, executed according to your SOP and recorded automatically. LabX captures all data and stores it in a central SQL-database. From you office, you gain access to all data immediately and enjoy powerful data management functionalities. Data can also be exported manually or automatically to any destination, e.g. to a validated MS Excel spreadsheet or an application software.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Airport Environmental Monitoring

    Water pollution from airport run-off is increasingly coming under public and government scrutiny. As environmental regulations tighten, the ability to monitor for aviation fuel contamination from runway run-off has become essential.

    Monitoring sites at airports can be extremely challenging often with no power or telephone lines available and with limited access for maintenance. Chelsea’s robust UviLux Hydrocarbon Sensor with its low power consumption and high accuracy is ideally suited for this application. Installed at various locations around the airport, deployed with it’s own integrated anti-biofouling system, utilising the GSM network, the monitoring sites send data to a secure ftp site, where any internet enabled device can access the data. In this way the systems act as any early warning system allowing any hydrocarbon discharge to be detected in real-time.

    Optional environmental monitoring features include remote control to allow the user to turn equipment on and off, change the sample rate and detection range. There is also a facility to allow SMS text and email alarm notifications triggered by user-defined set-points together with customised web pages, data displays and automated data downloads via an ftp server.

    Airport runoff can contain high concentrations of various pollutants, in particular polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs), the environmental levels of which have to be monitored. An understanding of the magnitude of contamination due to airport runoff water is important for the effective management of airport infrastructure. Chelsea’s robust UviLux Hydrocarbon Sensor with its low power consumption and high accuracy is ideally suited to the airport environment.

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • Premium

    Water Monitoring and Flow Measurement Systems for Hydrology

    In recent years acoustic flow measurement and flow metering has established itself as the standard method for measurement in many hydrological stations but is also used as the basis for various applications, for example for flood protection and flood forecasting. Ultrasonic flow meters are also used in hydro-engineering constructions. With this almost contact free technology data can be recorded continuously and it provides 24/7 monitoring. Such flow monitoring is particularly important in waterways used for shipping, transportation, irrigation, drainage and for cooling water extraction of power plants. A further important use of transit-time open channel flow meters is the transportation of water used for the supply of drinking water. Here the focus lies on detecting the flow rate of water loss at an early stage as it is sometimes difficult to detect small leakages.

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

  • Premium

    Multiparameter Monitoring for the Offshore Oil & Gas Industry

     Meeting the demands of small ROV’s to work class vehicles in the offshore oil & gas industry, Valeport have a range of sensors and probes to measure the physical parameters vital to safe operation.  From sensors to aid operation of the vehicle to probes for data input into metrology and construction operations, our “industry standard” packages are designed and built to perform.

    AUV requirements can mean provision of complete housed instruments or OEM style for users own interface.  Our small, low power, accurate and robust sensors will aid AUV manufacturers and users to get the data required.

    By Valeport Ltd based in Totnes, UNITED KINGDOM.

  • Meteo and Wind Monitoring Wind Energy Sector

    The Renewable Energy market is expanding rapidly to reduce the dependency on traditionial energy sources and to reduce CO2 emissions in the future. Mierij Meteo offers sensors and system for many applications in the Renewable Energy market. Mierij Meteo supplies wind sensors for wind turbine control, Automatic Weathers Station for forecasting and robust and accurate sensors for research and power curve measurements (MET masts). By using Mierij Meteo sensors and systems you will ensure optimal of your wind turbines. With our MET masts you will get the most reliable data to help make your investment in renewable energy become more profitable.

    By Mierij Meteo b.v based in De Bilt, NETHERLANDS.

  • Agricultural, Storm and Highway Runoff

    The ability to collect useful data about sediment transport and other pollutants closely coupled to SSC (such as nutrients, e-coli, phosphates and nitrates) is dependent on the timing and frequency of manual grab samples during run-off events. Most sediment and pollutant is transported during a small number of storm events which are infrequent and unpredictable. When they do occur, trained personnel or the proper equipment may not be available to collect grab samples. An automated pump sampler can eliminate the need to sample manually, but for the expense of a rechargeable power system, the autosampler, and possibly a datalogger and a typical turbidity probe, you’re no better off. With an automated pump sampler driven by the DTS-12 digital turbidity sensor and controlled by the Axiom H2 datalogger, you obtain a better understanding of the water’s quality, while taking a minimum number of samples, reducing site visits and saving lab analysis costs.

    By FTS based in Victoria, BRITISH COLUMBIA (CANADA).

  • Laboratory Solutions for the energy industry

    Been exploring for a LIMS solution that can better manage data, samples, testing, reporting and real-time monitoring? Put ATL on your crew. Our LIMS for the energy sector gives labs a truly user-friendly, reliable and scalable data-management and reporting solution - exactly what your company needs to power up to new levels of profitability.

    By Accelerated Technology Laboratories, Inc. based in West End, NORTH CAROLINA (USA).

  • Natural Capital Accounting

    Our Ecosystem (OE) is a ground-breaking mapping platform that combines powerful data sharing and querying capabilities with satellite imagery and analytical tools, allowing you to easily monitor your worldwide operations, review historic land changes or impacts, and assess potential risks and opportunities to your natural capital. Our Ecosystem also allows you to generate full reports based on your results, so you can use it to account for your impacts on ecosystem services and biodiversity, and comply with forthcoming natural capital disclosure standards. Best of all, you don’t need geographic information systems (GIS) or remote sensing software skills to operate Our Ecosystem. Ecometrica’s team of land use specialists and developers provide a managed service that gives decision-makers everything they need in an easy to use interface.

    By Ecometrica based in London, UNITED KINGDOM.

  • Forest Carbon Monioring

    Our Ecosystem (OE) can help you with: - Quantification of initial carbon stocks - Baseline and leakage assessment - Monitoring and verification OE makes it easy to access, organize, share and obtain information from maps and other spatial data on land and ecosystems, giving you the opportunity to interact with the data in an intuitive user interface. OE is delivered as a service that does not require specialist knowledge on geographical information system (GIS) software or remote sensing data and techniques within your organization. Instead of having to look at paper maps in a report, you will be able to pan through the data and zoom in to areas of interest. In addition, it allows you to extract information from the data for areas of special interest using powerful analytical tools. Your OE application is set up so that your data is secure, and you can control who has access to it.

    By Ecometrica based in London, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you