Only show results available in Virginia? Ok

power monitoring system Applications

  • Water Monitoring and Flow Measurement Systems for Water Power

    Hydro power contributes to supplying approximately 3,5 per cent of electric energy generated worldwide. Its share in power generation from renewable resources lies at 18 per cent and will continue to grow as resources of fossil fuels are depleted. Hydro electric performance depends essentially on the usable altitude difference between upper and lower reservoir, and hence the resulting water flow. In order to use the “fuel” water in an optimal way, the flow velocity has to be monitored without any interruptions. Ultrasonic flow meters, flow sensors and clamp-on flow meters (OR clamp-on technology) are ideal for accurate flow metering and flow monitoring.

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

  • Premium

    Emissions Monitoring for Power Plants

    Opsis offers fully automated system solutions for continuous monitoring in power plants. The monitoring systems have been approved by the German TÜV and the U.S. EPA among others.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Air sampling & monitoring systems for commercial nuclear industry

    Since 1973, HI-Q has directly and successfully served the commercial nuclear industry worldwide with reliable, High Quality (HI-Q), continuous duty air sampling equipment, systems and accessories. For over 30 years, our products, professional design capability, and consumables have been used in remote & internal air monitoring programs including stack sampling system designs which implement the “shrouded probe” per ANSI N13.1 1999 design specifications.

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

  • Premium

    Monitoring oil in power plant cooling water

    The Situation:

    A municipal power plant in the southern United States operates more than 10 stationary power plant engines capable of producing 52 megawatts of electric power. The plant is part of a larger statewide power grid system. Within the grid, the municipality brokers the purchase or sale of power hourly, based on the needs of municipality and the market rate for power on the grid system.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Radiation Monitoring for Nuclear Power

    The nuclear industry, including power plants, research centers and fuel cycle specialists are obliged by law to protect their staff, local populations, the environment and the processes they employ. With this in mind, Saphymo has developed a full range of dedicated products and systems, and plays a major role in radiation protection and ionizing radiation monitoring in both France and on an international scale. Saphymo constantly strives to satisfy safety requirements to the full, reinforce its technological know-how in the management of complex systems and anticipate customer needs, and offers adapted solutions in the fields of operational dosimetry, Radiation Monitoring Systems, contamination control, access control, environmental protection and survey meters. Saphymo also offers a broad panel of services intended to maintain its products in operational condition.

    By Bertin Technologies based in Montigny - Le - Bretonneux, FRANCE.

  • Environmental monitoring solution for power plant

    The construction of coal and natural gas power stations is continuing at a steady rate along with older power stations being retrofitted with more effective flue gas cleaning systems. Both the community and environmental protection authorities are paying closer attention to both emission and ambient concentrations around power stations.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Premium

    Continuous emissions monitoring for power plants

    OPSIS offers fully automated system solutions for continuous monitoring in power plants. The monitoring systems have been tested and approved by the German TÜV and the U.S. EPA among others, for the best performance and longest calibration interval.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Monitoring solutions for the dust monitors areas

    For large combustion plants and power plants we offer the DCEM 2100 particulate monitor. This monitor is certified to EN 15267 part 3 QAL 1 for all industrial processes including waste incineration. It offers outputs in Transmission, Opacity and mg/m3 (when calibrated against a Standard Reference Method). The DCEM 2100 offers real-time zero and span calibration and an efficient air purge system to prevent optical contamination.

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Dust monitoring and Sand Storm Monitoring

    The frequency and intensity of dust and sand storms in many parts of the world are steadily increasing due to droughts and climate change. The severity of such storms is anticipated to increase over the coming years. These dust storms may last hours or days and cause huge damage and imposed a heavy toll on society with its physical effects, such as visibility reduction, heavy winds, red sky, hailstone and severe lightning. Such Dust storms, have a negative impact on human health, and industrial products and activities. They reduce visibility, layer on skin and cloths, infiltrate buildings and find their way into food and drinking water leaving a permanent sandy feeling in your mouth. Traditional dust monitoring instruments whether they be purely filter based gravimetric samplers or continuous monitors utilising Tapered Element Oscillating Microbalance (TEOM) or Beta Attenuation (BAM) simply are unable to cope with the high dust loads created by these storms. The filters on these instruments are quickly clogged and no further measurements are possible until a service technician visits to replace filters and filter tapes. In dust storm events this is impossible. Therefore, over the past few years a need for alternate technology which are non filter based, can cope with extremely high dust loads, require minimal maintenance and can operate off solar power has been employed in regions such as the Gobi Desert of China for the continuous monitoring of dust storm events. These instruments have demonstrated that an instrument can measure dust storm events with maintenance performed only once every 12 months. That it is possible to communicate remotely and that these systems can not only provide an early warning for dust events but have the accuracy and sensitivity to be an extremely useful tool in gauging hourly changes of visibility. Infact such instruments have been utilised by a number of EPAs around the world, including all Australian EPAs for the purpose of measuring ambient visibility as well as providing an accurate indication of rising dust events.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Noise and vibration monitoring for nuclear power industry

    The nuclear industry must increase the availability and reliability of its power stations whilst ensuring that a high level of safety is maintained. The principal weak points in achieving this objective are the industry`s systems and components.

    By ACOEM based in Limonest, FRANCE.

  • Premium

    Power-independent flow measurement with GPRS

    In a pit water purification system it was necessary to detect the discharge volumes. The operator wanted a regular and automatic transmission of readings. On the selected measurement place no mains power connection was available. Due to the risk of vandalism, it was not planned to install a switching cabinet. See the NIVUS solution for this measurement task here.

    By NIVUS GmbH based in Eppingen, GERMANY.

  • Premium

    Continuous emissions monitoring for mercury monitoring

    Waste incinerators, cement plants and power plants need good and reliable measurements of total gaseous mercury. The measurement of total gaseous mercury is a challenge due to chemical reactions and contamination. The installed systems will often require a lot of maintanence still not giving reliable results.

    By Opsis AB based in Furulund, SWEDEN.

  • Digital Pathology

    Digital Pathology is an image-based information environment enabled by virtual microscopy. This involves imaging glass slides and saving and distributing their digital images for analysis, archiving and storage. The virtual microscopy slides are: •Scanned — using a microscope based scanning device that takes images of the whole slide via large scanning or stitching of smaller scans. This involves a motorized stage to scan the whole slide. Light source stability is important for scanning in order to prevent illumination variation across the whole scan. The X-Cite® exacte is commonly used in slide scanning systems. •Viewed — on a computer via viewing software •Managed — some of the slides have a barcode that is also scanned to enable archiving with patient information •Analysed — using image analysis tools and software, structures maybe automatically identified and quantified •Shared — digital pathology files may be shared over a network to gather additional expert opinion Digital pathology technology in no way replaces the expert eye and diagnosing power of a pathologist and a doctor. The only thing it saves is time to image the samples and also provides an efficient and organized way to archive the virtual microscopy slides for future consultations, record-keeping and disease comparison.

    By Excelitas Technologies based in Waltham, MASSACHUSETTS (USA).

  • Noise monitoring solutions for vibration testing

    Vibration testing is is used for aerospace and defence testing, ground transportation, transport simulation, package testing, altitude simulation and more. Our comprehensive range of LDS electrodynamic shakers are designed for vibration testing of devices of any size - from a semiconductor component to a complete satellite system, to see how it will stand up to real-world conditions. With an LDS vibration test system your shaker, power amplifier, vibration controller and even environmental chamber are not only controlled from one PC, they run under one software package. Combined with data acquisition systems and analysis software suites, Brüel & Kjær ofers the complete vibration testing solution to establish proof of quality according to national and international standards, such as DIN, ISO, BS, MIL, IEC and ASTM.

  • Premium

    Gas monitoring instruments and systems for DeNOx process control

    In most combustion process atmospheric nitrogen reacts with oxygen in high temperature conditions to produce nitrogen oxides (NOx). Total NOx production is the sum of nitrogen monoxide NO and nitrogen dioxide NO2. The emissions of these gases are controlled through setting of emission limit values (ELVs) for power plants.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Gas monitoring instruments and systems for engine emissions measurements

    The exhaust gas from combustion engines is a complex mixture of gases and particulate matter. The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid nitrogen cooling. The analyzer, sampling system and computer can be assembled on a cart for use in a dynamometer laboratory, or the portable version can be used for roadside tests.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Gas monitoring instruments and systems for stack testing

    Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. Further requirements are set on the quality assurance of the installed measurement systems at the plants. The relevant standard in this regard is EN 14181:2004, the quality assurance of automated measuring systems. The standard dictates how to determine that the measurement systems installed for continuous emissions monitoring at a plant operate according to the directives and regulations set. Two major parts of this on-going quality assurance cycle are the QAL2 and AST procedures. A test laboratory performs tests on the systems on-site, and determines whether the systems fulfill the set requirements or not.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Water Monitoring and Flow Measurement Systems for Hydrology

    In recent years acoustic flow measurement and flow metering has established itself as the standard method for measurement in many hydrological stations but is also used as the basis for various applications, for example for flood protection and flood forecasting. Ultrasonic flow meters are also used in hydro-engineering constructions. With this almost contact free technology data can be recorded continuously and it provides 24/7 monitoring. Such flow monitoring is particularly important in waterways used for shipping, transportation, irrigation, drainage and for cooling water extraction of power plants. A further important use of transit-time open channel flow meters is the transportation of water used for the supply of drinking water. Here the focus lies on detecting the flow rate of water loss at an early stage as it is sometimes difficult to detect small leakages.

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

  • Premium

    HCl Monitoring in Air

    Hydrogen chloride (HCl) is a colorless, sometimes slightly yellow, gas. It is an undesired environmental component that may be damaging to workers and the surroundings. Exposure limits have thus been established by industries to make sure that the workers operate in a safe environment. HCl monitoring is especially required for incinerators, coal-fired power plants, aluminum recycling and cement plants. Unisearch offers a reliable and easy-to-use HCl analyzer – the TDLAS-based LasIR system. Studies have shown that TDLAS equipment provides data that is more accurate than conventional gas monitoring equipment. When calibrated for HCl monitoring, TDLAS is able to detect this gas among other gases present in the area and provide continuous updates with regards to the changes in its concentration.

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

  • Measurement solution for VOC emissions monitoring

    Protea has used our VOC gas analysers in many projects requiring the monitoring of complex mixes of VOCs. In the chemical and pharmaceutical industry, VOC abatement plants such as scrubbers and carbon-bed systems are typical installations where the use of Protea analysers and our VOC analysis expertise have proved valuable to plant operators. They prove a very powerful and flexible tool in both process gas measurements and VOC emissions monitoring. In the laboratory, Protea can deliver instruments with all the chemometric software and support to enable users to measure hundreds of gases.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you