Only show results available in Virginia? Ok

power quality monitoring Applications

  • Premium

    Air quality monitoring

    To estimate the effects of aerosols on health and climate, it is essential to know their chemical composition. Sampling is done using two different types of aerosol collector. The first type are filter collectors that are based on the deposition of suspended particles on surfaces; the second type are powerful aerosol collectors.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Air Quality Monitoring Equipment for Industry

    Signal manufacture a wide range of Air Quality Monitoring equipment, from reference method integrated systems down to battery powered indicative units.

    By Signal Group Ltd based in Camberley, UNITED KINGDOM.

  • Air Quality Monitoring Equipment for Combustion Industry

    Boilers and Combustion Research A fuel source burning with oxygen to produce carbon monoxide, carbon dioxide and water is an equation from school science lessons but looking into the fuel temperature and oxides of nitrogen produced along with the CO, CO2 and O2 is work that is being carried out by boiler makers, power generators and all sorts of industrial applications every day.

    By Signal Group Ltd based in Camberley, UNITED KINGDOM.

  • Premium

    Air sampling & monitoring systems for commercial nuclear industry

    Since 1973, HI-Q has directly and successfully served the commercial nuclear industry worldwide with reliable, High Quality (HI-Q), continuous duty air sampling equipment, systems and accessories. For over 30 years, our products, professional design capability, and consumables have been used in remote & internal air monitoring programs including stack sampling system designs which implement the “shrouded probe” per ANSI N13.1 1999 design specifications.

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

  • Premium

    Noise monitoring solutions for vibration testing

    Vibration testing is is used for aerospace and defence testing, ground transportation, transport simulation, package testing, altitude simulation and more. Our comprehensive range of LDS electrodynamic shakers are designed for vibration testing of devices of any size - from a semiconductor component to a complete satellite system, to see how it will stand up to real-world conditions. With an LDS vibration test system your shaker, power amplifier, vibration controller and even environmental chamber are not only controlled from one PC, they run under one software package. Combined with data acquisition systems and analysis software suites, Brüel & Kjær ofers the complete vibration testing solution to establish proof of quality according to national and international standards, such as DIN, ISO, BS, MIL, IEC and ASTM.

  • CH4 Monitoring in Air

    CH4 (Methane) is a colorless, odorless natural gas that is used in a wide variety of industrial applications such as power generation and chemical production. It is also a byproduct of many biological and geological processes, fracking, and gas drilling. It is highly flammable and creates amounts of carbon monoxide as its combustion byproduct. Methane needs constant monitoring in waste water treatment (for co-generation) and to ensure proper process control (e.g. to determine burning efficiency). A quality CH4 analyzer that is able to provide continuous monitoring is a perfect solution for this.

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

  • Premium

    High quality gas sensor solutions for landfill

    State-of-the-art systems enabling easy monitoring of CO2 and CH4 gases. Capped Landfill Sites produce a range of gases, mostly methane and carbon dioxide. Legislation requires that these gases are safely removed from beneath the cap to avoid a physical explosion due to the build-up of pressure beneath the cap. Safe disposal usually entails burning such as flare stacks, internal combustion engines or by processing to produce Methane gas fuel. For large sites with access to power distribution infrastructure internal combustion engines are used to generate electricity which is fed into the local electricity grid. All of the above safe disposal process require the measurement of the Methane content (and in many cases the CO2 concentration). Edinburgh Sensors provide gas sensors for both Methane and CO2 that can be integrated into landfill gas processing systems enabling easy monitoring of these gases.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Premium

    Noise monitoring solutions for structural dynamics

    Everything needed to analyse the dynamic behavior and properties of structures, from a supplier of renowned quality. Brüel & Kjær is a ‘one-stop shop’ that offers a comprehensive range of application software, front-end hardware, modal excitation systems, impact hammers, transducers and accessories. At the core of a Brüel & Kjær system is the PULSE analyzer platform, which provides powerful applications and highly flexible hardware configurations.

  • Premium

    Measurement solution for hydrogen fuel cell testing

    As the alternatives to fossil fuels for power generation and automotive power become more widespread and preferred, so has increased the research and testing of hydrogen gas in fuel cells. The hydrogen (H2) gas used in fuel cell has to be free of impurities in order to make the fuel cell as efficient as possible and so quality thresholds have been set in legislation. Such legislation as SAE J2719 provides hydrogen fuel quality standards for proton exchange membrane (PEM) fuel cell vehicles. If impurities above these thresholds are present in the H2 fuel then there is a risk of not only making the cell inefficient, but also unrecoverable back to its peak operating voltage as the fuel cell electrode becomes poisoned.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Gas monitoring instruments and systems for stack testing

    Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. Further requirements are set on the quality assurance of the installed measurement systems at the plants. The relevant standard in this regard is EN 14181:2004, the quality assurance of automated measuring systems. The standard dictates how to determine that the measurement systems installed for continuous emissions monitoring at a plant operate according to the directives and regulations set. Two major parts of this on-going quality assurance cycle are the QAL2 and AST procedures. A test laboratory performs tests on the systems on-site, and determines whether the systems fulfill the set requirements or not.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Agricultural, Storm and Highway Runoff

    The ability to collect useful data about sediment transport and other pollutants closely coupled to SSC (such as nutrients, e-coli, phosphates and nitrates) is dependent on the timing and frequency of manual grab samples during run-off events. Most sediment and pollutant is transported during a small number of storm events which are infrequent and unpredictable. When they do occur, trained personnel or the proper equipment may not be available to collect grab samples. An automated pump sampler can eliminate the need to sample manually, but for the expense of a rechargeable power system, the autosampler, and possibly a datalogger and a typical turbidity probe, you’re no better off. With an automated pump sampler driven by the DTS-12 digital turbidity sensor and controlled by the Axiom H2 datalogger, you obtain a better understanding of the water’s quality, while taking a minimum number of samples, reducing site visits and saving lab analysis costs.

    By FTS based in Victoria, BRITISH COLUMBIA (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you