Only show results available in Virginia? Ok

pressure monitoring Applications

  • Pressure monitoring for environmental agencies

    By Scientific Sales, Inc. based in Lawrenceville, NEW JERSEY (USA).

  • Premium

    High pressure flow flow solutions

    Precision high pressure mass flow control is very difficult. Sierra has met this challenge with a patented high pressure mass flow controller design that offers impermeable elastomers with very little leakby.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Pressure Monitor use in a Containment Area

    When using negative pressure containment, it is important to monitor the pressure inside the containment in reference to the outside area. However, because the typical negative pressure required is usually only 0.020”WC, it can be difficult to find equipment sensitive enough to measure and monitor your containment area. Omnitec Design has two options to meet this need. Both the Watchman Differential Pressure Monitor and the self-contained Omniguard 4 Pressure Recorder are designed to provide highly accurate monitoring and alarm functions while still being easy to setup with a simple push-button calibration. A pressure monitor is a very important tool that can help ensure the integrity of a containment. Dealing with hazardous debris from abatement/remediation jobs can be a sensitive task that demands safe practices by workers to guarantee their safety, and those who may come into contact with potentially harmful material.

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Premium

    Ultra low pressure drop MFC flow solutions

    Precision mass flow control with industry leading pressure drop of 4.5 psid (310 mBard) up to flows of 500 slpm (nlpm); Accuracy +/- 1.0% of full scale; 316 stainless steel construction; CE Approved

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Aerosol and particle technology for pressure & temperature industries

    The reproducibility of the devices has been approved by worldwide use. In order to avoid the condensation or vaporization of the particles during the particle measurement, the isothermal and isobaric particle generation and measurement is necessary.

    By Palas GmbH based in Karlsruhe, GERMANY.

  • Premium

    Hydrometry Monitoring

    For rivers and streams we offer a range of impeller and electromagnetic current flow meters to use as a point velocity measuring devices to aid monitoring during catchment management, discharges and pollution.

    Water level can be monitored via pressure transducer and logger together with radio and GSM/GPRS telemetry options.

    By Valeport Ltd based in Totnes, UNITED KINGDOM.

  • Moisture Monitoring for Breathing Air & High Pressure Air Systems

    A reliable supply of breathing air is critical for applications in the military, medical and fire fighting sectors. The presence of excess moisture in breathing air can lead to freezing in the pressure regulator and ice blocking the orifice, causing an interruption to the supply of air to the user. Such freezing effects have caused the loss of life and equipment in submarines and aircraft.

    By Moisture Control & Measurement Ltd based in Wetherby, UNITED KINGDOM.

  • Premium

    Determination of TOC in stack

    PROBLEM: The industrial chimney's emissions of Volatile Organic Compounds (VOCs) are becoming issues of global importance and to have an accurate knowledge about how to test VOC turns into a strategic issue. VOC emissions are quantified and monitored according to standard EN 12619, using FID analyser which uses hydrogen and other reference gases in pressurized cylinder. Operators must then approach the sampling point, often placed several meters from the ground, climbing chimneys of industrial settlements with instruments and cylinders. Is it possible making this job easier and safer? SOLUTION: Using the Polaris FID analyser produced by Pollution Srl, Italy, it is possible to carry out the VOCs monitoring according to EN 12619 without lifting accessories and heavy weights typically involved with FID analyser. Polaris FID analyser complies with this standard regulation but what is really a breakthrough and cutting-edge, is the unmatched portability and the next generation technology

    By Pollution Srl based in Budrio, ITALY.

  • Gas monitoring and dust monitoring

    EM-5 series Continuous Emission Monitoring System (CEMS) Counting tail gas emission and realtime concentration NOX SO2 O2 Temperature pressure flow dust


  • calibration gas

    calibration gas , British specialty gases company, with a local North Africa presence. We can supply you with high quality gas mixtures for a wide range of applications including Environmental Monitoring, Gas Detection, Mud Logging, Laser Cutting, and Laboratory Analysis. Our gas mixtures are used in the Oil, Gas and Petrochemical industries Our main focus is to give our customers gravimetrically produced, high precision calibration gas mixtures conforming to ISO 6142, along with a range of high purity gases and pressure control equipment, used for instrumental analysis and gas detection applications. AG Gases' senior management have many years experience in the European and International markets and now offer this knowledge to benefit Egyptian and North African customers.

    By AG Gases Ltd based in Stoke-on-Trent, UNITED KINGDOM.

  • Premium

    Monitor Dredging Slurry Flow

    Thousands of dredges are operated to maintain navigation channels in our rivers, lakes and harbours and to mine sand and gravel for the construction industry. Managing and optimizing production from a dredge requires continuous monitoring of pipeline pressure, vacuum and slurry velocity. The operating conditions are extremely harsh and any sensing components in contact with the abrasive slurry can be damaged. But dredge operators need accurate real-time flow information to properly manage production so equipment manufacturers have been seeking innovative monitoring solutions...

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Premium

    Infrared Sources for Capnography

    Capnography is the monitoring of the concentration or partial pressure of carbon dioxide (CO2) in the respiratory gases. The CO2 concentration during a single breath is measured in a high temporal resolution to monitor the condition of the lungs.

    By Axetris Ag based in Kaegiswil, SWITZERLAND.

  • Radionuclide Monitoring for Nuclear Power Plants

    The continuing establishment of nuclear power stations around the world pose unique environmental challenges for their operators. Ecotech provides air samplers to nuclear power plants for sampling of radionuclides. A nuclear power plant`s radionuclide monitoring network enables continuous sampling of airborne particles onto sample filters contained within High Volume Air Samplers. These filters are then analysed in a laboratory in order to screen for any radiation releases. The challenge has always been to obtain a sufficiently large volume through the filter in order to exceed the laboratory methods minimum detection limits. Ecotech`s MegaVol Sampler, samples at a flow rate of between 120-150 m3/hr providing a high flow rate in order to collect a sufficient sample mass for laboratory analysis. The MegaVol will maintain volumetric flow rate at a preset volume until the filter is either changed or overloaded. The MegaVol can be equipped with a 3G modem in order to remotely monitor flow rate and other diagnostic parameters such as temperature, pressure and wind speed and direction.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Premium

    Flow meters for the general research flow solutions

    Our instruments are widely used by original equipment manufacturers of gas chromatographs, mixing and blending systems and other pieces of analytical equipment. The mulitple gas capability and wide choice of flow controlllers-for high pressure, very low flows and corrosive gases-offer customers excellent application flexibility.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Aerosol and particle technology for process control industry

    In order to ensure that an industrial process can be controlled or even improved and optimized continually an analysis of the current situation in real time is necessary. Process data like temperature, pressure but also particle concentration and size distribution of a material flow can supply valuable information and be used for the regulation or the improvement of a process.

    By Palas GmbH based in Karlsruhe, GERMANY.

  • Gas monitoring during industrial process

    EM-5 CEMS Coal power plant: Entrance of SCR denitration device, NOx O2 Exit of SCR denitration device: Measure remanet NH3 after reaction and avoid blocking by crystallization, NH3; Calculate denitrification rate with Nox input, NOx O2 Gas-fired power plant: Counting tail gas emission and realtime concentration, NOx O2 SO2 Temperature pressure flow dust


  • Premium

    Measurement solution for complex, real-time VOC measurement with atmosFIR FTIR gas analyser platform


    Volatile organic compounds (VOCs) are a group of organic compounds which have a low vapour pressure at room temperature, meaning that they will readily evaporate into the surrounding air. The term VOC refers to many different classes of organic compounds such as alkanes, alkenes, alcohols, aldehydes, aromatics and many more.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    High flow control (gas flow to 1000 slpm) flow solutions

    Sierra is an expert in the control of high flows of gases. With our large and powerful control valves and PID valve control, Sierra`s mass flow controllers, with industry-best low pressure drop, can control much higher flows than equivalent flow controllers with minimal pressure drop requirements.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Compressed air measurement & control flow solutions

    Compressed air isn`t free, so more and more companies carefully monitor its usage. Thermal flow meters are ideal for this application. Because our thermal flow meters measure mass flow directly, no temperature or pressure compensation is required. Thermal flow meters also have a very high turndown, allowing the same flow meter to measure very low leak rates as well as full operational flows.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Sewage Treatment Plants and Flow Sensors for Industry Application

    In sewage treatment plants, flow sensors are primarily installed for internal reasons. Ultrasonic flow meters are used to control the flow velocity in partially filled and fulfilled pressurized pipes, specific plant components, for leak detection or to control the use of additives. International regulations such as the EU-Directive for handling municipal waste water require flow metering for a continuous surveillance of waste water flow. Defective flow monitoring in sewage-treatment plants can therefore influence their operation, but there can also be legal or environmental consequences.


    By HydroVision GmbH based in Kaufbeuren, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you