Only show results available in Virginia? Ok

pressure monitoring system Applications

  • Moisture Monitoring for Breathing Air & High Pressure Air Systems

    A reliable supply of breathing air is critical for applications in the military, medical and fire fighting sectors. The presence of excess moisture in breathing air can lead to freezing in the pressure regulator and ice blocking the orifice, causing an interruption to the supply of air to the user. Such freezing effects have caused the loss of life and equipment in submarines and aircraft.

    By Moisture Control & Measurement Ltd based in Wetherby, UNITED KINGDOM.

  • Gas monitoring and dust monitoring

    EM-5 series Continuous Emission Monitoring System (CEMS) Counting tail gas emission and realtime concentration NOX SO2 O2 Temperature pressure flow dust

    By HANGZHOU ZETIAN TECHNOLOGY CO., LTD based in Hangzhou, CHINA.

  • Premium

    Flow meters for the general research flow solutions

    Our instruments are widely used by original equipment manufacturers of gas chromatographs, mixing and blending systems and other pieces of analytical equipment. The mulitple gas capability and wide choice of flow controlllers-for high pressure, very low flows and corrosive gases-offer customers excellent application flexibility.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Smoke generator device for leak testing & building envelope testing

    Smoke is the perfect medium for discovering where leaks are and how big they are! Filling a `leaky` building, ductwork, pipes, aircraft or containment area with smoke and ideally adding a small amount of pressure to the area being tested, will result in a visible discharge of smoke and, simply put, the greater the volume of smoke, the bigger the leak. After Concept developed a bespoke system for their aircraft testing requirements, a spokesperson for the RAF commented: `The use of smoke as a means by which to detect cabin pressurisation leaks has been shown to be extremely effective and is unquestionably superior to any alternative detection method used to date!`

    By Concept Smoke Systems based in Maidenhead, UNITED KINGDOM.

  • Smoke generator device for PPV & impulse ventilation testing

    When water-based artificial smoke is introduced into a rapidly moving air stream, the particles that make up the artificial smoke evaporate much more quickly than they do in a static environment. So if you are looking to produce an artificial smoke that better represents the smoke created by a real fire, we would always recommend the ViCount smoke generator, the smoke from which is virtually unaffected by fast moving air streams. Used world wide PPV training centre`s and to test impulse ventilation systems. A Home Office report into PPV (Positive pressure Ventilation) by the Head of the Fire Experimental Unit, Fire Research & Development concluded that the concept behind the technique of PPV was relatively easy to understand and the equipment simple to operate, but stressed the need for extensive training.

    By Concept Smoke Systems based in Maidenhead, UNITED KINGDOM.

  • Premium

    SF6 Leak Detection

    Monitoring Sulfur Hexafluoride (SF6) in the Power Utility Industry. Monitoring Sulfur Hexafluoride in the Power Utility Industry The SF6 Leak Detector 3434i from LumaSense offers an unmatched combination of performance and convenience. Based on the company’s Photoacoustic Spectroscopy (PAS) technology, the system offers highly accurate, reliable and stable quantitative gas analysis and detection. The growing environmental requirements and pressures regarding the use of SF6 make LumaSense’s system a coveted tool designed for everyday use. The system is able to measure the total concentration of the SF6 gas in an enclosed area, where the switchgear (or other SF6 filled equipment) is tested. Although only the total amount leaked is required by today’s standards, it is also advantageous to be able to pin point the leaks. This makes it easier to improve the integrity of the equipment. The SF6 Leak Detector system meets all of requirements for confined area such as substation Monitoring.

    By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA).

  • Premium

    Process Control for the Petrochemical Chemical Industry

    Most chemical products as we know today are composed of a few hundreds of basic chemicals, extracted mostly from crude oil and natural gas. Instrumentation, analyzer systems and process optimization are not new to the operation of all chemical and petrochemical processes.

    However, tightening regulations, competition pressure and increasing raw materials cost urges the industry to go deeper into process control technology. As a single-source supplier of the (petro)chemical industry since many years, AppliTek has supplied them many analyzer systems for monitoring chemical parameters in all sorts of applications, from the actual production step to peripheral treatment processes. Our application people and engineering department understand your needs and translate them into real solutions.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    High quality gas sensor solutions for landfill

    State-of-the-art systems enabling easy monitoring of CO2 and CH4 gases. Capped Landfill Sites produce a range of gases, mostly methane and carbon dioxide. Legislation requires that these gases are safely removed from beneath the cap to avoid a physical explosion due to the build-up of pressure beneath the cap. Safe disposal usually entails burning such as flare stacks, internal combustion engines or by processing to produce Methane gas fuel. For large sites with access to power distribution infrastructure internal combustion engines are used to generate electricity which is fed into the local electricity grid. All of the above safe disposal process require the measurement of the Methane content (and in many cases the CO2 concentration). Edinburgh Sensors provide gas sensors for both Methane and CO2 that can be integrated into landfill gas processing systems enabling easy monitoring of these gases.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Geotechnical Applications

    Pore pressure variability and control is one of the most significant aspects of Geotechnical Engineering practice related to slope stability, underground openings, foundation of heavy structures, and water retention facilities. Pore pressure effects are most often controlled by natural small-scale hydrogeologic details. Characterization and management of pore pressures requires closely-arrayed repeated measurements to determine the effects of these details for design of appropriate mitigation measures, for performance monitoring and control of the selected mitigation measure. Since the late 1970’s the Westbay System has been used on some of the largest landslide studies in the world.

    By Westbay Instruments based in Burnaby, BRITISH COLUMBIA (CANADA).

  • Transport Meteorology

    The Biral sensors provide reliable, consistently accurate weather information day and night. This allows timely decisions to be made about spraying or gritting road surfaces and for switching road warning signs, achieving the best results from limited and valuable resources. In addition to the visibility and present weather sensors, Biral are the appointed UK Distributor for the meteorological instrument manufacturer, Adolf Thies GmbH & Co. KG. The Thies Clima range of meteorological sensors is highly respected and used globally in many advanced meteorological applications. It offers a complete and complimentary range of sensors allowing a highly specified meteorological monitoring station or system to be constructed. The range includes cup and vane and ultrasonic anemometers, temperature, humidity, pressure and radiation sensors, as well as a wide range of compact weather stations and precipitation sensors.

    By Biral - Bristol Industrial & Research Associates Ltd based in Portishead, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you