Only show results available in Virginia? Ok

process analysis Applications

  • Premium

    Medical Gas Analysis for Process Industry

    USP37 Medical Gas requires a specific, selective and positive identification test using a paramagnetic signal. Regular analysis of medical gas is required to ensure that the oxygen concentration is NLT 99.0% volume. Following the appropriate United States Pharmacopeia standards, in this case specifically USP37, requires an analyzer which uses a paramagnetic based technology.  The Systech Illinois Paramagnetic Oxgyen Analyzer PM700 is perfectly suited for this medical gas analysis application.

    By Systech Instruments Ltd based in Thame, UNITED KINGDOM.

  • Analysis for industrial processes

    Analysis for industrial processes.

    By NT Sensors S.L. based in El Catllar, SPAIN.

  • Premium

    Process water

    Process water is one of the most challenging for analysis instrumentation. Mostly this water is characterized by a certain purity, fluctuating loads, as well as very high salt concentrations. Since any disturbance in water-circuits can lead to an entire plant shutdown, resulting in huge costs, reliable and fast online water analyzers are an essential. Due to the diverse demands of various measurement challenges, application-specific analyzers provide huge advantages against standard analyzers that are used for every application.

    By LAR Process Analysers AG based in Berlin, GERMANY.

  • Beverage Analysis

    Hiden gas analysis systems provide for high sensitivity, wide dynamic range, real-time analysis of almost any gas/vapour. Hiden’s application specific gas analysis systems are tailored to meet the specific application requirements, & include a range of special sampling, vacuum pumping and vacuum accessories. Hot zone sampling accessories are included for evolved gas analysis from furnaces, & thermo gravimetric analysers, TGA, for example. Thermal analysis methods are vital for catalysis characterization. For thermal analysis including TPD/TPO/TPR studies, Hiden gas analysis systems include enhanced pumping for hydrogen and special close coupled sampling to the TPD/TPO/TPR reactor for optimum thermal analysis response. In Biogas applications the simultaneous analysis of H2S, CO2, water vapour & CH4 in the PPM to 100% concentration range provides vital information for process development and process monitoring

    By Hiden Analytical based in Warrington, UNITED KINGDOM.

  • XRF analysis for positive material identification

    Positive Material Identification, or PMI, is an integral part of process safety management in many industries including the petroleum refining and petrochemical. Whether the need is quality control, sorting of scrap material, or even failure analysis, materials testing to provide verification of metal alloy grade and composition is crucial to the success of many businesses.

    By Niton UK Limited based in Woodmancott, Winchester, UNITED KINGDOM.

  • Residual Gas Analysis

    Residual Gas Analysis is a general term for the analysis of gas and vapour species in vacuum chambers and vacuum processes. The Hiden RGA series quadrupole mass spectrometers provide for routine, fast, wide dynamic range residual gas analysis, measuring the partial pressures of the species that are critical to vacuum quality and process requirements. Applications include: vacuum chamber leak detection vacuum quality measurement and monitoring virtual leak detection outgassing studies bakeout cycle/vacuum pump down monitoring

    By Hiden Analytical based in Warrington, UNITED KINGDOM.

  • Premium

    Gas analysis & monitoring system for biogas analysis

    “Biogas” means a mixture of various types of gas (mostly methane) produced by bacterial fermentation in anaerobic conditions(absence of oxygen) of organic residues from waste, decaying plant, carcasses in putrescence. The analyzers of biogas by Infrared cells carry out the continuous analysis of CH4, O2, CO2, H2S and NH3. The whole process sees the decomposition of organic material by some types of bacteria, producing carbon dioxide, molecular hydrogen and methane(methane conversion of organic compounds).

    By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY.

  • Premium

    Precision moisture analysis instruments for rapid moisture analysis for plastics

    Reduce rejected product and wasted material. Nozzle drool. Impaired physical properties. Silver streaks and other cosmetic blemishes. If the moisture content in a resin is too high at processing time, you’re likely to end up with a costly, unusable mess. And as the materials science behind plastics continues to improve, resulting in stronger, lighter, and more durable resins, accurate moisture measurement and control will only become more critical. A moisture analyzer is an indispensable piece of equipment for injection molders, blow molders and extruders.

    By Arizona Instrument LLC based in Chandler, ARIZONA (USA).

  • Premium

    Monitoring solutions for the process monitoring

    Maintain specification in your process stream or bench top setup with a Cerex process analyzer. Cerex UV3000 F Series analyzers accurately detect gases from ppb level to percent level concentrations via a fiber coupled probe for precise control of a process stream. The F series are also well suited to fiber couple to a custom cell for laboratory analysis, and feature user programmable alarm levels to control process functions or give warning when a process filter needs replacement. Cerex analyzers are also available customized to customer specification.

    By Cerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA).

  • Premium

    Machine condition monitoring for metals processing

    Overview

    Metals processing industries employ large, critical assets, the reliability of which is absolutely essential to their business model. An undetected failure of a piece of processing equipment such as a rolling mill gearbox, or a 1000 ton extruder press not only involves the cost of equipment repair and line downtime, but the product quality may be severely impacted. Today more than ever, there is also less redundancy. Oil analysis is a critical aspect of a reliability based maintenance program, and for many large slow speed systems, it is the first line of protection. Spectro’s oil analysis solutions are designed to monitor this critical oil lubricated machinery, and provide the asset owners with timely information for reliability decision support.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Chemical Industry Emissions Analysis

    The inherent flexibility of Procal analysers enables the instruments to be configured to meet Customer’s specific requirements. Their capability to monitor gas concentrations at elevated pressures and temperatures make Procal products ideal for process applications in the Chemical Industry.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

  • Combustion gas analysis for the glass industry

    Flue-gas analyzers are designed to be rugged and accurate at the same time. They are used by the HVAC industry, energy industry, process control, glass industry, food industry, universities and analysis is required. 

    By IMR Environmental Equipment, Inc. based in St. Petersburg, FLORIDA (USA).

  • Nitric Acid Production Emissions Analysis

    The Procal 2000 emissions analyser measures Oxides of Nitrogen for process control purposes, typically upstream of the N2O abatement reactor where typical pressures can be as high as 10 barg.  The analyser can be supplied in both in situ and extractive configuration to suit customers’ requirements.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

  • Gravimetric analysis for soil consultancy

    There are many businesses that release emissions into the air due to their daily processes. Because there are regulations in place to minimize pollution, these businesses need the help of air testing companies to make sure they are in compliance with the regulations. We perform air emissions testing to let your business know whether it falls within the set guidelines, as well as emissions monitoring services to ensure you remain within the regulations. This will keep the environment around your plant healthy and ensure you don’t accrue fines for violations.

    By Custom Stack Analysis, LLC. based in Alliance, OHIO (USA).

  • Premium

    Precision moisture analysis instruments for rapid moisture analysis for foods

    Optimize processes and deliver consistent quality. Maybe you’re serious about snacks. Or nuts about nuts. Maybe you’re all about oils. Or perhaps baked goods are your bread and butter. Whatever the case, you know that accurate moisture control is critical to the success of your food products. The Computrac® family of moisture analyzers will enable you to quickly obtain reliable, repeatable moisture content results, independent of operator skill.

    By Arizona Instrument LLC based in Chandler, ARIZONA (USA).

  • Premium

    Precision moisture analysis instruments for fast, accurate solids analysis for wastewater

    Computrac moisture, solids and ash analyzers are able to quickly and easily determine solids content of cakes, slurries and sludge samples for the wastewater, hazardous waste and landfill industries. Identifying the optimal solids content of these byproducts of the treatment process can provide significant cost savings on chemical additives, haulage and incineration. Computrac analyzers are easy to use and their rugged and reliable design means that you’ll get accurate results whether they’re in the plant or in the lab. They can also be used to determine whether or not total solids content in landfills is consistent with state and local regulations.

    By Arizona Instrument LLC based in Chandler, ARIZONA (USA).

  • Gas Analysis Systems for Catalysis, Thermal Analysis, Fermentation and Bio Fuels

    Hiden gas analysis systems provide for high sensitivity, wide dynamic range, real-time analysis of almost any gas and vapour. Hiden’s application specific gas analysis systems are tailored to meet the specific application requirements, and include a range of special sampling, vacuum pumping and vacuum accessories. Hot zone sampling accessories are included for evolved gas analysis from furnaces, and thermo gravimetric analysers, TGA, for example. Thermal analysis methods are vital for catalysis characterization. For thermal analysis including TPD/TPO/TPR, studies, Hiden gas analysis systems include enhanced pumping for hydrogen and special close coupled sampling to the TPD/TPO/TPR reactor for optimum thermal analysis response. In Biogas applications the simultaneous analysis of H2S, CO2, water vapour and CH4 in the PPM to 100% concentration range provides vital information for process development and process monitoring.

    By Hiden Analytical based in Warrington, UNITED KINGDOM.

  • Aerosol and particle technology for process control industry

    In order to ensure that an industrial process can be controlled or even improved and optimized continually an analysis of the current situation in real time is necessary. Process data like temperature, pressure but also particle concentration and size distribution of a material flow can supply valuable information and be used for the regulation or the improvement of a process.

    By Palas GmbH based in Karlsruhe, GERMANY.

  • Premium

    Gas monitoring instruments and systems for process NOx measurement

    Nitric acid HNO3 is an important intermediate reagent for production of several important end products, such as fertilizers, explosives, dyestuffs/pigments, pesticides, pharmaceuticals, photographic materials, plastics, and synthetic fibers. At nitric acid manufacturing plants, the Gasmet™ FTIR Gas Analyzer can be used to measure several gaseous components from the process stream for purposes of process control. A single system can be used to measure the high levels of nitrogen monoxide NO and nitrogen dioxide NO2, as well as water vapor H2O, nitrous oxide N2O, carbon monoxide CO, carbon dioxide CO2 and ammonia NH3. The fixed installation products for these purposes are the Gasmet™ CEM II measurement system, and the Gasmet™ FCX Gas Analyzers, both of which utilize the FTIR measurement technique for simultaneous multicomponent analysis of the sample gas.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you