process control Applications | Environmental XPRT

Premium

Milling process control

NIR-analyzer InfraLUM FT-12 is used for quality control of flour and by-products at all milling stages. With InfraLUM FT-12 analyser is possible to create, localize, and update calibration models. Installation and calibration using Customer’s samples are made at the Customer’s lab. ...

By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

Premium

Analytical instruments for analyzing refinery products

and other by-products. All methods are compliant with the most important industrial regulations (ASTM, EN, ISO, etc.) and can be applied in process control and adaptation, incoming goods and final products specification check (quality assurance) or legal limit adherence (e.g., TS legal limits for ...

By Analytik Jena - an Endress+Hauser Company based in Jena, GERMANY.

Premium

Hand-Held & process control water testing instrument for Boilers and cooling towers

Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level can be ...

By Myron L Company based in Carlsbad, CALIFORNIA (USA).

Premium

Hand-Held & process control water testing instrument for Fountain solutions

Accurate fountain (dampening) solution concentration control is essential for consistent, high-quality results in lithography. Low concentration can cause drying on the non-image area of the plate resulting in tinting, scumming, blanket piling, etc. High concentrations, on the other hand, bring about ...

By Myron L Company based in Carlsbad, CALIFORNIA (USA).

Premium

Hand-Held & process control water testing instrument for for Environmental industry

on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation's waterways. Today, in many cases, there are restrictions on wastewater that is discharged to city sewer systems or to other publicly owned treatment ...

By Myron L Company based in Carlsbad, CALIFORNIA (USA).

Premium

Thin-film Measurement Technology for Measurement and Control Industry

Measurement and control is an essential element in determining the effectiveness of products in the Process Control industry. A wide variety of applications are met in this industry by IST’s diverse family of temperature sensors. Additional process control applications are met by unique humidity and flow ...

By Innovative Sensor Technology (IST) based in Las Vegas, NEVADA (USA).

Premium

Analytical instruments for analyzing petrochemicals

Learn more about Analytik Jena's precise and sensitive methods for the determination of ultra-trace element contents in liquid, gaseous and solid organic hydrocarbons and their mixtures - for process and product control. Discover simple ways to make sure your product specifications match your quality ...

By Analytik Jena - an Endress+Hauser Company based in Jena, GERMANY.

Premium

Hand-Held & process control water testing instrument for Circuit board cleanliness testing industry

for control. Now a simple 'on line' test for the relative measurement of ionic contamination has been developed. This fast and economical method for testing circuit board cleanliness uses a Myron L Company Ultrameter II™ 4P or 6P, a suitable container, and a mixture of Dl (deionized) water and ...

By Myron L Company based in Carlsbad, CALIFORNIA (USA).

Premium

Hand-Held & process control water testing instrument for Deionized water testing industry

Years ago, high purity water was used only in limited applications. Today, deionized (Dl) water has become an essential ingredient in hundreds of applications including: medical, laboratory, pharmaceutical, cosmetics, electronics manufacturing, food processing, plating, countless industrial processes, and ...

By Myron L Company based in Carlsbad, CALIFORNIA (USA).

Premium

Gas monitoring instruments and systems for DeNOx process control

In most combustion process atmospheric nitrogen reacts with oxygen in high temperature conditions to produce nitrogen oxides (NOx). Total NOx production is the sum of nitrogen monoxide NO and nitrogen dioxide NO2. The emissions of these gases are controlled through setting of emission limit values (ELVs) for ...

By Gasmet Technologies Oy based in Vantaa, FINLAND.

Premium

Temperature and gas sensing solutions products for industrial electronics

Optimize performance, boost functionality, and decrease costs. Industrial electronics require high power quality thanks to equipment and process control sensitivity (e.g., factory automation equipment, semiconductor processing, etc.). As a power system designer, you're faced with changing safety regulations, ...

By Advanced Energy based in Milpitas, CALIFORNIA (USA).

Premium

Process instrumentation and analytics solutions for engineering

Siemens brings a wealth of engineering expertise together with expansive portfolio of products and services. We offer a broad array of offerings such as Front-End Engineering Design (FEED), System Integration, Process optimization and training. Leverage Siemens' know-how to meet your process control ...

By Siemens Industry, Inc. - Process Analytics based in Houston, TEXAS (USA).

Premium

Monitors, gas analyzers solutions for understanding ISO 21501-4

step in more accurate evaluations of clean room contamination and improved process control. ISO 21501, Determination of particle size distribution—Single particle light interaction methods, includes four parts, of which only Part 4 will be discussed in this paper: Light scattering airborne particle ...

By Particle Measuring Systems based in Boulder, COLORADO (USA).

Premium

Process analyzers & instruments for feed gas SRU process control

By AMETEK Process Instruments based in Pittsburgh, PENNSYLVANIA (USA).

Premium

Gas analyzers and monitoring systems for Raw gas measurements

Raw gases are untreated flue gases that have not passed through an emissions control technology system like selective catalytic reduction (SCR) or selective non-catalytic reduction (SNCR). They are generally measured for the sakes of process control and warranty tracking. Typically only a few components are ...

By Gasmet Technologies Oy based in Vantaa, FINLAND.

Premium

Process monitoring solutions for special applications processes

OPSIS is a world-leading supplier of gas monitoring systems for various special applications in the process control sector. The OPSIS process monitoring systems have been tested and approved by a range of international authorities, and has proven to have the best performance and longest calibration intervals. ...

By OPSIS AB based in Furulund, SWEDEN.

Process Control for the Pharmaceutical Industry

Current pharmaceutical manufacturing practices would be impossible without the benefits of Process Analytical Technology (PAT) which became a framework for bottom line process understanding. The cornerstones of the PAT approach —multivariate data acquisition, process/endpoint monitoring and process ...

By AppliTek NV based in Nazareth, BELGIUM.

Premium

Laboratory instruments solutions for pharmaceutical industry

), excipients, impurities, pharmaceutical solutions as well as pharmaceutical starting materials, and finished pharmaceutical products (FPPs). Additionally, we provide numerous wet chemical methods for atline and online process control as well as inline monitoring methods for assuring cost-effective manufacturing ...

By Metrohm AG based in Herisau, SWITZERLAND.

Process control for the petrochemical chemical industry

Most chemical products as we know today are composed of a few hundreds of basic chemicals, extracted mostly from crude oil and natural gas. Operators of chemical and petrochemical processes understand the importance of process optimization, and understand the impact of instrumentation and analyzer ...

By AppliTek NV based in Nazareth, BELGIUM.

Premium

Water Testing for Textile Manufacturing

The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, ...

By Myron L Company based in Carlsbad, CALIFORNIA (USA).