Only show results in Virginia? Ok

process wastewater contaminants Applications

  • Water Contamination Detection

    Security of water assets is becoming an increasingly major issue that demands immediate and robust alarms for potential contamination. In addition to this, natural growth of algae is a common problem for water asset managers, the results of which can increase maintenance costs of water processing plants as well as directly effecting water taste. The CTG FastGuard fast repetition rate fluorometer analyses information on the physiological state of the algae it monitors within an in-line flow system. A number of key parameters are monitored and analysed by the on-board embedded software, which instantly initiates both an audible and visual alarm on detection of a contaminant within the water system. The FastGuard is a robust low maintenance system which avoids false positives often provided by other contamination detection systems.

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • Biological wastewater processes for mining

    The mining industry has the potential to use large amounts of wastewater in its operations. Often times these waste streams contain contaminants that require treatment before the water can be re-used or discharged. Biowater has successfully installed highly efficient biofilm treatment processes including our complete mix fixed film (CMFF®) system to remove BOD/COD, and nitrogen from mining waste streams. Biowater’s technologies, such as our CFIC® process, can produce effluent water quality that is acceptable for re-use, reducing the stress on ecosystems in water stressed areas.

    By Biowater Technology AS based in Tonsberg, NORWAY.

  • Industrial solutions for process water control

    Problem: Water is fundamental for numerous manufacturing processes. Contaminated or poor quality process water can cause significant operational problems and compromise the quality of the product.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Microbial testing for industrial process water sector

    Real-time Information for Same Shift Problem Solving! Don`t take chances on microbiological contamination! Through fast, portable, and accurate testing, LuminUltra`s QuenchGone21 Industrial (QG21I™) test kit instantly measures the total microbiological content in industrial process waters to detect emerging growth and locate the source of contamination. This takes the guess-work out of managing process water systems and aids with disinfection and cleaning cycles. LuminUltra`s QG21I test is the ideal tool to help save time & money and reduce risk in industrial process water management!

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Industrial and commercial water filtration for process water

    Filtration for Process Water is a widely used term and has a great number of uses dependent on the operation. Filtration for process water or water purification is a process where any undesirable contaminants are removed from the water to ensure it’s suitable for its intended use. The filtrat0ion of process water does not always have to be for drinking water for humans but can also refer to water purification for the use of industrial or commercial applications in a variety of industries include pharmaceutical, chemical, Paper and Textiles, Steel,  Food and Beverage, Plastics, Automotive and many more.

    By Hydro-Gen Engineering Ltd based in Widnes, UNITED KINGDOM.

  • Premium

    Industrial wastewater solutions for container cleaning wastewater

    Flexible, turnkey solutions for container cleaning. Cleaning industrial containers such as canisters, vats or IBCs produce large volumes of effluent. The type of impurities in this effluent depends heavily on what has been transported in the containers. That’s why effluent treatment requires a flexible system able to cope with all conceivable contaminants. Reconditioners are increasingly using modern vacuum distillation systems to do this. They work fully automatically, guarantee a high level of process reliability, minimal residue, and render a zero liquid discharge container cleaning process.

    By H2O GmbH based in Steinen, GERMANY.

  • Premium

    Industrial wastewater solutions for vibratory grinding wastewater

    Using innovative recycling technologies in vibratory grinding processes. Rinse water from vibratory grinding processes ca be contaminated with heavy metals, oils and, depending on the process, even a variety of chemicals. It cannot be discharged into the public sewer system, and usually requires to be disposed of with specialized waste management companies expensivly. But there are alternatives: Vacuum distillation with VACUDEST evaporators is an economical, resource-friendly method for treating this industrial wastewater. It conditions the vibratory grinding wastewater in such a way that it can be reused in the process.

    By H2O GmbH based in Steinen, GERMANY.

  • Plating rinse wastewater solution

    Plating rinse wastewater is one of the most common applications for ENCON Wastewater Evaporators. Wastewater from plating rinse tends to be rather corrosive. The chemistries used in the plating process can include a wide range of acids such as nitric acid, chromic acid, hydrochloric acid, sulfuric acid, hydrofluoric acid, as well as other non-acid chemistries like ammonium bifluoride and nickel sulfamate. Typically, the waste stream has a transparent, relatively clean look because they are dilute and the contaminants are in solution.

    By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).

  • WATER PURIFICATION

    Citto Activated Carbon ‘Water Series’ provides total solutions for water purification using cutting edge carbon manufacturing technologies. We offer high quality, standard, specially processed products complying with ISO9001-certified. Our carbons effectively remove organic molecules including Volatile Organic Compounds (VOCs), disinfection by-products (DBPs), chlorinated compounds, chloramines, polycyclic hydrocarbons, heavy metals, colored bodies, toxins and oils among many other contaminants.

    By Citto Corporation based in TORONTO, ONTARIO (CANADA).

  • Cooling Towers and Process Water System Cleaning Applications Using Hydrogen Peroxide

    The unique properties of hydrogen peroxide (H2O2) make it a good technology for keeping cooling loops, process water loops and heat exchangers clean from fouling that can occur due to various contaminants in the water. Hydrogen peroxide works well in removing organic fouling on surfaces through mechanical means and in specific applications through biocidal mechanisms. Hydrogen peroxide can be used in a shock treatment mode where it is fed based on a timer set-up. It can also be used occasionally at higher concentrations for maintenance cleaning purposes of fouled heat exchangers, cooling water loops and process water loops. Performing an occasional shock cleaning of a heat exchanger with hydrogen peroxide can remove buildup from surfaces and can result in improved heat transfer efficiency. By removing surface fouling, hydrogen peroxide may also improve the efficiency of other biocides such as bleach, bromine and non-oxidizers.

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Air control for wastewater treatment aeration

    Aeration Process Introduction: Waste Water Treatment removes impurities and contaminants from a com¬munity`s sewage utilizing a number of different processes and a variety of equipment. One of the processes is the use of surface aerated basins that use aerobic micro-organisms to remove 80 to 90% of organic matter in waste water. Oxygen concentration in the water basins is a critical factor to promote the optimum micro-organism growth rate needed to treat the water in the shortest amount of time. As a result, large compressors are used to force air through hundreds of air diffusion filters at the bottom of the aeration basins, providing a constant 24/7 supply of oxygen to the micro-organisms in the water.

    By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Filtration systems & solutions for wastewater treatment industry

    The removal of contaminants from untreated water has become a leading issue, due to environmental concerns and the threat of future water shortage. An effective purification process is necessary to eliminate organic, chemical or other debris to meet stringent regulations for drinking water, as well as for the chemical, industrial, pharmaceutical and science markets.

    By Porvair Filtration Group based in Fareham, UNITED KINGDOM.

  • Premium

    RAPID ANALYSIS OF TOTAL MERCURY IN WASTE WATERS AND PROCESS WATERS WITH ELEVATED MERCURY CONTENT USING DIRECT PYROLYSIS TECHNIQUE

    A conventional standard method of total mercury determination in water using atomic absorption spectrometry (AAS) involves preliminary sample digestion that takes from 30 minutes to 8 hours depending on the digestion conditions. The use of a mercury analyzer RA-915M/RA-915+ with Zeeman background correction in combination with PYRO-915+ pyrolysis attachment provides direct determination of mercury in process and waste waters contaminated with mercury without digestion or any other sample preparation stages. The measuring method is based on thermal atomization of mercury from a sample using a PYRO-915+ attachment and its consequent determination by flameless AAS with Zeeman background correction using the RA-915M mercury analyzer. The total time needed for determination of mercury is not longer than 2 minutes. RA-915+/915M is compliant with US EPA 7473 and ASTM D7622 methods.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Solutions for the aerobic bioremediation

    BioSolve Pinkwater is used to accelerate natural bioremediation of contaminated soil either on site through surface application or on land farms through application to biopiles. When Pinkwater solution is sprayed onto and aggressively mixed into contaminated soil, hydrocarbons come in contact with the strongly “lipophilic” (oil loving) surfactant. Mimicking the process by which bacteria make hydrocarbons digestible, the surfactants “solubilize” contaminates, pulling them into an aqueous phase. This greatly enhances “bioavailability” for naturally occurring hydrocarbon degrader bacteria. Bacteria are able to more rapidly consume the contaminating oil/fuel, thereby dramatically accelerating the biodegradation process.

    By The BioSolve Company based in Lexington, MASSACHUSETTS (USA).

  • Premium

    Wastewater Treatment

    Many industrial and pharmaceutical processes generate wastewater with volatile contaminants that increase the COD and BOD to a point where discharging to municipal wastewater is very costly or not an option. These contaminants can be removed from the water by distillation, substantially lowering the disposal cost, and, in many cases, the removed components can be further purified and reused in the process. MEGTEC offers the following solutions to remove the volatile contaminants and make wastewater suitable for discharge to most municipal wastewater treatment plants: Stripping columns using direct steam or a reboiler Distillation columns using indirect steam heat sources Our technologies have been applied to a range of processes including wastewater treatment from industries such as Pharmaceutical, Semiconductor, Chemical and Petrochemical.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Wastewater treatment for meat and derived industry

    Our process separates the solid materials from oils and fat that are mainly produced during the animal`s slaughter and quartering. In the case of slaughterhouses, our ANACONDA equipment can reduce the contaminating load by up to 95%.

    By Toro Equipment S.L. based in La Cistérniga, SPAIN.

  • Premium

    Monitoring of hydrocarbons in bilge water

    Various processes onboard ships, such as machinery wash-down, maintenance, and leakage, generate oily wastewater. This contaminated water flow collects in the bilge of the ship. Marine diesel, lubricating oils, grease, as well as other contaminants may be present in bilge water. The bilge water is discharged overboard, with oil and grease concentrations in the discharged water limited by national and international regulations.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Ozone/UV systems for Industrial, municipal, and residential wastewater treatment

    In 2004-2005 LIFETECH`s laboratory worked out an advanced oxidation process (AOP) for removal of dioxins and furans (PCDD/F), chlorophenols and other contaminants from the BCD process wastewater. Consequently, our technology was installed and from April 2006 successfully used in the `Spolana-Dioxins` Project at SPOLANA a.s. in Neratovice, Czech Republic, as a part of Special Wastewater Treatment Plant. Our supply consisted of an ozone generator with the output of 5 kg O3/h at 10% w/w ozone concentration, two reaction tanks with mixing systems, a vent ozone destructor, and a control system. The world largest project for removal of PCDD/F was managed by BCD CZ a.s., a subsidiary of Thermal and Chemical Soil Remediation Ltd.

    By LIFETECH based in Brno, CZECH REPUBLIC.

  • Industrial solutions for ultrapure water monitoring

    Problem: Trace contamination in ultrapure water (UPW) can have detrimental effects on a manufacturing process in Semiconductor, Power Generation and Pharmaceutical industries. Onsite treatment is conducted to further remove trace impurities from source water.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Wastewater treatment solutions for mining and primary metals industry

    Water is essential component in the mining and steel industries. The main needs under this aspect are optimizing the management of the resources, improving productivity by treating available water for specific production process requirements and managing environmental risks by treating contaminated pond and underground mine water to remove suspended solids and in particular heavy metals (SS), arsenic and other contaminants for safe discharge into sensitive environment.

    By IDRAFLOT based in Zoppola, ITALY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you