process water Applications available in Newfoundland

  • Premium

    Process water

    Process water is one of the most challenging for analysis instrumentation. Mostly this water is characterized by a certain purity, fluctuating loads, as well as very high salt concentrations. Since any disturbance in water-circuits can lead to an entire plant shutdown, resulting in huge costs, reliable and fast online water analyzers are an essential. Due to the diverse demands of various measurement challenges, application-specific analyzers provide huge advantages against standard analyzers that are used for every application.

    By LAR Process Analysers AG based in Berlin, GERMANY.

  • Premium

    Water Treatment for Industrial Process

    Among the various industrial treatment options available for heavy metal reduction, few are simple, proven, affordable, and reliable as the selective adsorption treatment technology offered by AdEdge Technologies. AdEdge provides a line of pre-engineered, packaged industrial wastewater treatment systems designed for removal of heavy metals from groundwater and industrial wastewater using a variety of adsorption media technologies.

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

  • Premium

    Process water treatment

    Process water covers the wide range of boiler feed water, cooling water for heat exchangers or engine, chemicals dilution, etc. It should typically have a conductivity ranging from 0,1 to 50 uS/cm, with little to no hardness to avoid scaling in heating system. Oxygen and carbon dioxide should be removed to prevent corrosion. Depending on your application, the water quality requirements can vary: Boiler feed water characteristic. Cooling water quality. Tap water or fresh groundwater are the most widely used source of water to produce process water.

    By Lenntech Water Treatment based in Delft, NETHERLANDS.

  • Premium

    Cleaning process for water intake

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA).

  • Premium

    Treatment of Process Water within Industry

    Water is used for a wide variety of purposes in industrial production. Water has to be treated, so that sufficient amounts are available in the quality required for production. Process water must generally be re-treated after it has been used, so that it can either be discharged according to regulations or returned to the water cycle.

    By EnviroChemie GmbH based in Rossdorf bei Darmstadt, GERMANY.

  • Premium

    Chemical Water Treatment for cooling and processing water

    An optimal heat transfer is the most important point in every water cooled process. Scale, corrosion and biofouling negatively affect the heat transfer. Therefore Kurita develops for cooling and process water systems customized solutions, based on the combined treatments of scale & fouling prevention, corrosion inhibition, and biocides.

    By Kurita based in Tokyo, JAPAN.

  • Industrial solutions for process water control

    Problem: Water is fundamental for numerous manufacturing processes. Contaminated or poor quality process water can cause significant operational problems and compromise the quality of the product.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Premium

    Process Analytics - Water Purification (THORNTON)

    THORNTON specializes in measurements for pure and ultrapure water treatment with parameters of resistivity, conductivity, total organic carbon (TOC), flow, pH, ORP, dissolved oxygen and ozone. THORNTON products are frequently used in semiconductor and microelectronics manufacturing, pharmaceutical and biotechnology processing, and power and steam generation, as well as food and beverage production.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Odor control for wastewater treatment processes

    Natural odor control for wastewater treatment processes. Industrial and municipal wastewater treatment generates odors that can be strong, persistent, and a nuisance to employees, residents, businesses, and industries located near the wastewater treatment plant.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Chemical Water Treatment for process chemicals

    Kurita Water Solutions provides oil refineries and petrochemical plants with all the chemical additives used directly in the process, to fight the problems caused by the composition of the crude oil and the intermediate products. In oil refineries and petrochemical plants the goal is to improve efficiency and to optimise the production capacity.

    By Kurita based in Tokyo, JAPAN.

  • Optimization of Wastewater Processing and Operations

    The biocatalytic composition Bio-Organic Catalyst (BOC) provides numerous benefits for all of the biological processes (aerobic and anaerobic) used to convert waste loadings into high quality discharges. The array of benefits made possible with BOC can be applied system-wide to bring critical solutions to the fundamental challenges of operators. Odors, improving dissolved oxygen levels, reduction of organic loadings and biosolids, bio-film build up, elimination of Fats, Oils & Grease (FOG), and improvements in discharge quality are all operating parameters that can be improved with use of BOC.

    By EcoJump LLC based in Santa Clara, CALIFORNIA (USA).

  • Process Design

    Custom water and wastewater engineering, consulting and process design services to prevent air, land, water and environmental pollution. We rework systems as processes change and troubleshoot where necessary to bring systems into compliance. • High purity and process water • Biological nutrient removal • Solids treatment • Toxicity reduction • Industrial treatment • Advanced oxidation and alternative disinfection • Effluent reclamation and reuse • Land application systems • Natural treatment systems • Hydrogen sulfide and odor control • Decentralized treatment systems • Process optimization / operations assistance • Conceptual and strategic water planning

    By Yates Environmental Services based in Spokane, WASHINGTON (USA).

  • Premium

    Ultraviolet disinfection systems for the process water

    Water is often used as a product, or as part of the manufacturing process. In many industrial applications, processes are chemical (chlorine) intolerant, and UV is widely adopted. atg UV Technology engineers will be pleased to discuss solving disinfection problems with you. As well as a powerful disinfectant, UV is used to remove chlorine, chloramines, ozone, bromine, and a wide variety of contaminants from industrial process water. Within micro-electronics facilities for example, UV is used to remove Total Organic Carbon (TOC) from ultra pure rinse water.

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Premium

    Process Analytics - Wastewater Applications

    Control of wastewater is increasingly becoming important to avoid potential environmental and increasing legal consequences. Accurate pH, O2, conductivity and turbidity measurements are critical in modern wastewater treatment. METTLER TOLEDO offers reliable, cost-effective solutions to control industrial effluents.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Process water treatment for the electroplating and galvanizing industry

    Treatment solutions for water and effluent from electroplating and galvanizing industry. Treatments of rinsing water and effluents obtained from surface treatments of: metals, special alloys, and plastic. SAITA provides plants and solutions such as: Zero discharge plant, recycling of rinsing waters, polluted baths’ filtration, chemical-physical treatment plants, demineralization and reverse osmosis plants and evaporators.

    Treatments

    Chromating // Nickel-plating // Galvanizing // Electroless nickel // Aluminium anodizing // Phosphating // PVD // Wet vibrofinishing // Fashion accessories // Plastic metallization // Printed circuits PCB.

    By SAITA srl based in Limena (PD), ITALY.

  • Water treatment for meat processing

    Water is one of the single biggest raw materials used in meat processing, and its quality is of great importance to prevent contamination of food product. The use of contaminated water in the processing plant can spread infection across the whole food batch. This is a cause of serious concern to the food industry, consumers and regulatory bodies, besides that, it causes financial losses and food scare. Chlorine dioxide, a very powerful biocide, has a number of advantages over other products commonly used in the meat processing industry. When properly applied, chlorine dioxide can act as a break in contamination thereby reducing/eliminating cross contamination as well as removing superficial microorganisms before they have an opportunity to become attached and penetrate the carcass.

    By Applied Oxidation LLC based in Chattanooga, TENNESSEE (USA).

  • Water treatment for food processing

    Most food processing facilities currently use a combination of different chemicals for all surface and machine disinfection. They periodically rotate the use of different sanitizers to prevent the harmful microorganisms from building a resistance to their killing properties. Unfortunately facilities are still experiencing pathogen outbreaks. Chlorine dioxide’s unique killing ability does not allow for the build up of resistance or mutation, and therefore eliminates the need for all of the other chemicals. Chlorine dioxide is effective for use in controlling microbiological growth in flume waters and other food processing water systems such as chill water systems and hydrocoolers.

    By Applied Oxidation LLC based in Chattanooga, TENNESSEE (USA).

  • Premium

    Environmental dewatering solutions for industrial wastewater processing

    TenCate Geotube technology provides cost-effective and sure dewatering and containment in a wide variety of industries.  In Power and Utility, Pulp and Paper and other general industries that produce sludge, TenCate Geotube dewatering technology enables the recovery of valuable materials, provides structural stability, improves water quality, or just reduces storage footprint by sometimes 50 to 80%.  The dewatering containers can be custom-sized to the application, placed in available space between other structures, and removed once dewatering is complete. In some cases, conditioners or polymers are used to promote flocculation to increase dewatering rate, improve solids retention and filtrate quality.

    By TenCate Geosynthetics Netherlands bv based in AE in Nijverdal, NETHERLANDS.

  • Premium

    Process instrumentation and analytics solutions for water and wastewater industry

    As one of the world’s leaders in industry automation and an experienced provider of integrated technologies, we offer products and systems tailored to the requirements of the water and wastewater industry.

    By Siemens Industry, Inc. - Process Analytics based in Houston, TEXAS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you