process water Applications available in Zaire

  • Premium

    Process water

    Process water is one of the most challenging for analysis instrumentation. Mostly this water is characterized by a certain purity, fluctuating loads, as well as very high salt concentrations. Since any disturbance in water-circuits can lead to an entire plant shutdown, resulting in huge costs, reliable and fast online water analyzers are an essential. Due to the diverse demands of various measurement challenges, application-specific analyzers provide huge advantages against standard analyzers that are used for every application.

    By LAR Process Analysers AG based in Berlin, GERMANY.

  • Premium

    Water Treatment for Industrial Process

    Among the various industrial treatment options available for heavy metal reduction, few are simple, proven, affordable, and reliable as the selective adsorption treatment technology offered by AdEdge Technologies. AdEdge provides a line of pre-engineered, packaged industrial wastewater treatment systems designed for removal of heavy metals from groundwater and industrial wastewater using a variety of adsorption media technologies.

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

  • Premium

    Process water treatment

    Process water covers the wide range of boiler feed water, cooling water for heat exchangers or engine, chemicals dilution, etc. It should typically have a conductivity ranging from 0,1 to 50 uS/cm, with little to no hardness to avoid scaling in heating system. Oxygen and carbon dioxide should be removed to prevent corrosion. Depending on your application, the water quality requirements can vary: Boiler feed water characteristic. Cooling water quality. Tap water or fresh groundwater are the most widely used source of water to produce process water.

    By Lenntech Water Treatment based in Delft, NETHERLANDS.

  • Premium

    Treatment of Process Water within Industry

    Water is used for a wide variety of purposes in industrial production. Water has to be treated, so that sufficient amounts are available in the quality required for production. Process water must generally be re-treated after it has been used, so that it can either be discharged according to regulations or returned to the water cycle.

    By EnviroChemie GmbH based in Rossdorf bei Darmstadt, GERMANY.

  • Premium

    Cleaning process for water intake

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA).

  • Premium

    Chemical Water Treatment for cooling and processing water

    An optimal heat transfer is the most important point in every water cooled process. Scale, corrosion and biofouling negatively affect the heat transfer. Therefore Kurita develops for cooling and process water systems customized solutions, based on the combined treatments of scale & fouling prevention, corrosion inhibition, and biocides.

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Process Analytics - Water Purification (THORNTON)

    THORNTON specializes in measurements for pure and ultrapure water treatment with parameters of resistivity, conductivity, total organic carbon (TOC), flow, pH, ORP, dissolved oxygen and ozone. THORNTON products are frequently used in semiconductor and microelectronics manufacturing, pharmaceutical and biotechnology processing, and power and steam generation, as well as food and beverage production.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Odor control for wastewater treatment processes

    Natural odor control for wastewater treatment processes. Industrial and municipal wastewater treatment generates odors that can be strong, persistent, and a nuisance to employees, residents, businesses, and industries located near the wastewater treatment plant.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Chemical Water Treatment for process chemicals

    Kurita Water Solutions provides oil refineries and petrochemical plants with all the chemical additives used directly in the process, to fight the problems caused by the composition of the crude oil and the intermediate products. In oil refineries and petrochemical plants the goal is to improve efficiency and to optimise the production capacity.

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Ultraviolet disinfection systems for the process water

    Water is often used as a product, or as part of the manufacturing process. In many industrial applications, processes are chemical (chlorine) intolerant, and UV is widely adopted. atg UV Technology engineers will be pleased to discuss solving disinfection problems with you. As well as a powerful disinfectant, UV is used to remove chlorine, chloramines, ozone, bromine, and a wide variety of contaminants from industrial process water. Within micro-electronics facilities for example, UV is used to remove Total Organic Carbon (TOC) from ultra pure rinse water.

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Process water treatment for the electroplating and galvanizing industry

    Treatment solutions for water and effluent from electroplating and galvanizing industry. Treatments of rinsing water and effluents obtained from surface treatments of: metals, special alloys, and plastic. SAITA provides plants and solutions such as: Zero discharge plant, recycling of rinsing waters, polluted baths’ filtration, chemical-physical treatment plants, demineralization and reverse osmosis plants and evaporators.

    Treatments

    Chromating // Nickel-plating // Galvanizing // Electroless nickel // Aluminium anodizing // Phosphating // PVD // Wet vibrofinishing // Fashion accessories // Plastic metallization // Printed circuits PCB.

    By SAITA srl based in Limena (PD), ITALY.

  • Optimization of Wastewater Processing and Operations

    The biocatalytic composition Bio-Organic Catalyst (BOC) provides numerous benefits for all of the biological processes (aerobic and anaerobic) used to convert waste loadings into high quality discharges. The array of benefits made possible with BOC can be applied system-wide to bring critical solutions to the fundamental challenges of operators. Odors, improving dissolved oxygen levels, reduction of organic loadings and biosolids, bio-film build up, elimination of Fats, Oils & Grease (FOG), and improvements in discharge quality are all operating parameters that can be improved with use of BOC.

    By EcoJump LLC based in Santa Clara, CALIFORNIA (USA).

  • Premium

    Process Analytics - Wastewater Applications

    Control of wastewater is increasingly becoming important to avoid potential environmental and increasing legal consequences. Accurate pH, O2, conductivity and turbidity measurements are critical in modern wastewater treatment. METTLER TOLEDO offers reliable, cost-effective solutions to control industrial effluents.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Environmental dewatering solutions for industrial wastewater processing

    TenCate Geotube technology provides cost-effective and sure dewatering and containment in a wide variety of industries.  In Power and Utility, Pulp and Paper and other general industries that produce sludge, TenCate Geotube dewatering technology enables the recovery of valuable materials, provides structural stability, improves water quality, or just reduces storage footprint by sometimes 50 to 80%.  The dewatering containers can be custom-sized to the application, placed in available space between other structures, and removed once dewatering is complete. In some cases, conditioners or polymers are used to promote flocculation to increase dewatering rate, improve solids retention and filtrate quality.

    By TenCate Geosynthetics Netherlands bv based in AE in Nijverdal, NETHERLANDS.

  • Premium

    Process instrumentation and analytics solutions for water and wastewater industry

    As one of the world’s leaders in industry automation and an experienced provider of integrated technologies, we offer products and systems tailored to the requirements of the water and wastewater industry.

    By Siemens Industry, Inc. - Process Analytics based in Houston, TEXAS (USA).

  • Waste water respirometry solutions for process optimisation

    Respiration rate of activated sludge has been recognised as a key controlling element in the modelling of process control, by the International Water Association Task Group. Actual respiration rate of the sludge in the aeration tanks, as well as the endogenous and maximum respiration rates are variables that indicate the rate of BOD removal and aeration requirements. The maximum respiration rate is also closely linked to the Critical Oxygen Concentration point, that is, the point at which diffusion over the bacterial cell walls ceases and therefore biodegradation is significantly compromised.

    By Strathkelvin Instruments Ltd. based in North Lanarkshire, UNITED KINGDOM.

  • Process monitoring and controlling for wastewater treatment industry

    Automation can save money, optimise a process and give warning of potential breeches of discharge consent. However, instrument selection is fundamentally important if a control system is to function efficiently. The measurement device must accurately and quickly respond to process variations and it must be reliable in operation if the control system is to function as intended. Designed properly, energy and chemical use can be significantly reduced, saving money and ultimately improving effluent quality.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Premium

    MPP water purification systems for industrial waste and process water application

    Removal of total spectrum of non-polar and polar hydrocarbons proven in practice: MPPE removes toxic, non-polar, non biodegradable compounds, aromatics, poly aromatics, halogenated, chlorinated, PCBs, THT (TetraHydroTiophene), Dioxins, CS2 etc. Folowed by biotreatment removing polar biodegradable compounds. Optional: UF and/or activated carbon filtration and RO for reuse as process or boiler feed water.

  • Water-Wastewater Measurements / NO analyzers for measurement of nitrification processes

    NO analyzers for measurement of nitrification processes applied for treating high concentration nitrogen wastewaters by microbial nitric oxide production. Also, the conversion of N-nitrosomines to nitric oxide for the quantification of those compounds in wastewater impacted waters. View Water-Wastewater Measurement Products

    By ECO PHYSICS INC. based in Ann Arbor, MICHIGAN (USA).

  • Traveling Water Screens for Chemical and Processing Plant Industy

    Our chemical and processing plant services include custom traveling water screen design and installation. We are one of the leading traveling water screen suppliers worldwide. Our screen solutions solve debris removal plant inflow sources to deal with solid contaminating material. Varied screen mesh sizes allow for use in varying conditions and applications.

    By International Water Screens based in Bakersfield, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you