Only show results in Virginia? Ok

process water chemical Applications

  • Premium

    Chemical Water Treatment for process chemicals

    Kurita Water Solutions provides oil refineries and petrochemical plants with all the chemical additives used directly in the process, to fight the problems caused by the composition of the crude oil and the intermediate products. In oil refineries and petrochemical plants the goal is to improve efficiency and to optimise the production capacity.

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Chemical Water Treatment for cooling and processing water

    An optimal heat transfer is the most important point in every water cooled process. Scale, corrosion and biofouling negatively affect the heat transfer. Therefore Kurita develops for cooling and process water systems customized solutions, based on the combined treatments of scale & fouling prevention, corrosion inhibition, and biocides.

    By Kurita based in Tokyo, JAPAN.

  • Industrial water treatment products for chemical processing

    Ethylene, styrene, ammonia, methanol, and other chemical producers require sustainable utility treatment results. Our technology focus is on reducing corrosion and fouling, while meeting compliance, safety regulations, and alternative water resource demands.

    By ChemTreat, Inc. - a subsidiary of Danaher Corporation based in Glen Allen, VIRGINIA (USA).

  • Traveling Water Screens for Chemical and Processing Plant Industy

    Our chemical and processing plant services include custom traveling water screen design and installation. We are one of the leading traveling water screen suppliers worldwide. Our screen solutions solve debris removal plant inflow sources to deal with solid contaminating material. Varied screen mesh sizes allow for use in varying conditions and applications.

    By International Water Screens based in Bakersfield, CALIFORNIA (USA).

  • Acid Regeneration Process

    Acid Regeneration Process The commercially most relevant field of application for HCl regeneration processes is the recovery of HCl from waste pickle liquors from carbon steel pickling lines. Other applications include the production of metal oxides such as, but not limited, to Al2O3 and MgO as well as rare earth oxides by pyrohydrolysis of aqueous metal chloride or rare earth chloride solutions. A number of different process routes are available. The most widely used is based on pyrohydrolysis and adiabatic absorption of hydrogen chloride in water, a process invented in the 1960s. However tightening environmental standards and stringent air permit policies render it increasingly difficult to establish new pyrohydrolysis based acid regeneration plants.

    By Insheng Engineering Co., Ltd based in Pingtung, TAIWAN.

  • Water quality monitoring for chemical industry

    Chemical plants that produce high quantities of phenols (plastics, pesticides and pharmaceutical industries) and other aromatic organic compounds are excellent candidates for wastewater characterization via spectral analysis. Chemicals that contain conjugated double bonds absorb UV radiation remarkably well. The benefits include higher precision in process control as well as optimization of wastewater treatment.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Industrial process and environmental monitoring

    Laser Gas analyzer Oil refining, CO, CO2, O2, CH4 Ethylene cracking CO, CO2, etc. EO/EG, PE/PP, O2, C2H4, etc. Ethyl benzene/styrene monomer/PS, O2, CO/CO2, Trace water in the benzene PTA, CO, CO2, O2 Coal gasification O2 Mathanol/ammonia/urea O2, CO, CO2, NH3, etc. Chlor-alkali/PVC H2O, O2, CO2, C2H4, etc Sulphuric acid O2

    By HANGZHOU ZETIAN TECHNOLOGY CO., LTD based in Hangzhou, CHINA.

  • Water treatment systems for chemical industry

    The effluents that accrue in the cleaning process of silo vehicles and containers for transportation of raw materials for the chemical industry, are highly complex and constantly changing in the composition of wastewater. Flocculation as the prior art of treatment for chemical waste water can not remove many of the completely dissolved invisible substances. Thus, the residual stresses are evident despite high claritv of the `Treated effluent` is often well above the levels witch are applicable for wastewater in domestic environments.

    By Weidner Ireland Ltd based in IRELAND.

  • Premium

    Water treatment solutions for chemical industry

    Precision with fluids in the chemical industry. ProMinent metering systems guarantee precision in chemical process engineering. They reliably meter even the most difficult of fluids, thus increasing the quality of your products.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY.

  • Membrane Filtration for Chemical Industry

    Membrane technology has made major progress in recent years and is nowadays the method of choice for many processes in the chemical industry, wherever substances are to be separated efficiently and gently. A prime example of this is dia-filtration, in which solutes and particles with higher molecular weights are retained while solutes with lower molecular weights are "washed" out of the process fluid.

    By MICRODYN-NADIR based in Wiesbaden, GERMANY.

  • Premium

    Water treatment chemicals for the automotive industry

    Immense global competition has compelled the automobile industry to optimize processes and improve energy efficiency. Continuous and effective production processes are key factors to meeting these challenges. Kurita is your competent partner for all questions concerning water and waste water management as well as paint detackifying. With more than 60 years of experience, we offer the most technically up-to-date water and process treatment solutions. Our highly qualified engineers will gladly advise you on how to increase plant lifecycle and reduce energy costs.

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Process water treatment

    Process water covers the wide range of boiler feed water, cooling water for heat exchangers or engine, chemicals dilution, etc. It should typically have a conductivity ranging from 0,1 to 50 uS/cm, with little to no hardness to avoid scaling in heating system. Oxygen and carbon dioxide should be removed to prevent corrosion. Depending on your application, the water quality requirements can vary: Boiler feed water characteristic. Cooling water quality. Tap water or fresh groundwater are the most widely used source of water to produce process water.

    By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.

  • Premium

    Chemical Water Treatment for boiler water & heating systems

    In nearly all industrial areas steam is needed for different aims e.g. steam for process side, heating purpose or the generation of electricity. To reach the best efficiency of the boiler system an optimal boiler water treatment is essential. Disturbances in boilers caused by deposits, scaling, corrosion, local overheating or carryover into the steam reduce the operating safety and could lead to tremendous economic damages. Kurita delivers innovative technologies to prevent scale and corrosion in the whole boiler system - feed water tank, boiler, steam and condensate system.

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Water treatment chemicals for the refinery and petrochemical industry

    Highly complex processes in refinery and petrochemical plants demand the competent handling of operational facilities and products. Water and process treatment also have to meet these requirements in order to ensure plant and system safety. Kurita offers you precisely this security: with decades of experience, we advise and support you in the various fields of application. Take advantage of our know-how and our customer proximity.

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Water treatment solutions for the chemicals & pharmaceuticals industry

    Water is a critical ingredient in chemical manufacturing operations; consistent and high-quality supplies are needed for a range of purposes including production, material processing, and cooling. Water treatment systems have to often comply to very stringent industry specific qualifications and certifications. A stable and guaranteed water supply is critical and duty stand-by solutions are frequently requested from end-users.

    By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.

  • Industrial and commercial water filtration for process water

    Filtration for Process Water is a widely used term and has a great number of uses dependent on the operation. Filtration for process water or water purification is a process where any undesirable contaminants are removed from the water to ensure it’s suitable for its intended use. The filtrat0ion of process water does not always have to be for drinking water for humans but can also refer to water purification for the use of industrial or commercial applications in a variety of industries include pharmaceutical, chemical, Paper and Textiles, Steel,  Food and Beverage, Plastics, Automotive and many more.

    By Hydro-Gen Engineering Ltd based in Widnes, UNITED KINGDOM.

  • Premium

    Water treatment chemicals for the manufacturing industry

    In all industrial sectors, productivity and economic efficiency are the main factors for sustainable success. Reliable and durable production plants together with their cooling, boiler and waste water systems therefore play an important role. For more than 60 years, Kurita has specialized in water and process treatment. Our 5,200 employees work on behalf of our customers worldwide in a variety of industrial fields. Our individual treatment concepts and competent service help ensure the safe and economical operation of their facilities.

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Water treatment chemicals for the paper industry

    The paper and board industry is in a geographic and structural transition. The industry is addressed by rising legal, economic and ecological demands which require a high level of innovation. As a leading global provider of unique solutions for industries that use water and energy intensively Kurita has a strong commitment to paper. We have a proven expertise in the supply and application of benchmarking products and technologies that support the paper industry in developing innovative products, optimizing processes and in reducing costs, energy, water and waste.

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Water treatment chemicals solutions for automobile manufacturing industry

    When automobiles are manufactured, each vehicle is painted by spraying a mist (paint mist) onto the car body and other parts. This process is referred to as the paint booth, and it ensures the beautiful finishing of car bodies and components and rust proofing. The excess paint that does not to cling to the car body and parts in the paint booth falls to the floor and is collected by water. This water is used as recycling water after removing the paint with water treatment chemicals.

    By Kurita based in Tokyo, JAPAN.

  • High-calcium lime slurry for industrial (chemicals & food processing) sector

    Lime is used in many industrial applications to treat plant processing water and as a key ingredient in the production of chemicals and the food processing industry.

    By Sudbury Lime Ltd. based in Copper Cliff,, ONTARIO (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you