Only show results available in Virginia? Ok

process water flow Applications

  • Premium

    Process Analytics - Water Purification (THORNTON)

    THORNTON specializes in measurements for pure and ultrapure water treatment with parameters of resistivity, conductivity, total organic carbon (TOC), flow, pH, ORP, dissolved oxygen and ozone. THORNTON products are frequently used in semiconductor and microelectronics manufacturing, pharmaceutical and biotechnology processing, and power and steam generation, as well as food and beverage production.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Flow measurement instrumentation for waste water treatment flow solutions

    With its high turndown and direct mass flow, our immersible thermal meters are the instrument of choice for measuring aeration basin air flow and monitoring digester gas. Our multivariable vortex meters are used to measure steam in the cogeneration processes, while our ultrasonic flowmetersare used for influent and effluent measurement.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Trapped Key Interlocks for Flow Control

    KIRK Eagle Series valve interlock systems can be implemented within many industries in which managing the flow of materials and products is critical.  Valve interlocks can aid in minimizing loss of product, preventing materials from mixing that may cause hazardous results,  and promoting flow control process safety that protects your personnel and equipment. The specific flow control applications below can be designed to meet the unique needs of every customer and can be added to an existing KIRK trapped key interlock system.

    By Kirk Key Interlock Company based in North Canton, OHIO (USA).

  • Electrical Based Tomography Systems for Multiphase Flow

    Multiphase flows are complex and unpredictable however they have a significant bearing on the safety, costs and revenues of many processes – particularly in oil and gas, but also in aerospace, chemicals and other sectors.

    By Industrial Tomography Systems (ITS) based in Manchester, UNITED KINGDOM.

  • Electrical Based Tomography Systems for Slurry Flow

    Slurry transportation is required in a diverse range of sectors, from food to minerals processing; and oil sands processing to nuclear waste management. As a process it requires significant levels of energy and the abrasive nature of materials used can lead to ongoing issues of pipeline erosion.

    By Industrial Tomography Systems (ITS) based in Manchester, UNITED KINGDOM.

  • Premium

    Ozone Water Treatment for Activated Sludge Process Plants

    Ozone breaks up filaments and improves settling characteristics of the sludge... Filamentous sludge is a common problem at activated sludge plants. With ozonation of the return sludge flow it is possible to reduced the amount of filamentous bacteria in the sludge and significantly increased the settling properties of the sludge.This in turn means better performance of the activated sludge process. When a bioreactor is connected to the sludge line the removal of the damaging filamentous bacteria means higher quality sludge in the bioreactor, which leads to higher biogas production.

    By Primozone Production AB based in Löddeköpinge, SWEDEN.

  • Drinking Water

    Ensuring safe drinking water is a complicated and resource intensive process involving stringent state and federal requirements. Failures in the system are not only costly but can pose serious threats to public health. Pumping tests provide needed data to ensure proper flow and aquifer levels. With DriveConnect technology in place it is possible to significantly minimize expensive lift station drawdown testing.

    Drive‑Chat enabled solutions can reduce costs with automated alerts and remote anywhere anytime access.

    With Drive‑Chat you can:

    • Monitor every pump in the system
    • Efficiently control pumps
    • Check well health
    • Receive real-time alerts before major failures occur
    • Customize alerts per specified conditions

    By DriveConnect based in Brandon, FLORIDA (USA).

  • Industrial water boiler feed water

    Ion exchange is an effective, versatile means of conditioning boiler feedwater. The term “ion exchange` describes the process : as water flows through a bed of ion exchange material, undesirable ions are removed and replaced with less objectionable ones. For example, in softening processes, calcium and magnesium ions(hardness) are exchanged for sodium ions. In dealkalization, the ions contributing to alkalinity(carbonate, bicarbonate, etc.) are removed and replaced with chloride ions.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Water Contamination Detection

    Security of water assets is becoming an increasingly major issue that demands immediate and robust alarms for potential contamination. In addition to this, natural growth of algae is a common problem for water asset managers, the results of which can increase maintenance costs of water processing plants as well as directly effecting water taste. The CTG FastGuard fast repetition rate fluorometer analyses information on the physiological state of the algae it monitors within an in-line flow system. A number of key parameters are monitored and analysed by the on-board embedded software, which instantly initiates both an audible and visual alarm on detection of a contaminant within the water system. The FastGuard is a robust low maintenance system which avoids false positives often provided by other contamination detection systems.

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • Premium

    Flow & Energy Management Solutions for Plant & Machine

    Spire Metering offers several solutions for leakage detection. The flowmeters are used to monitor cooling water in machining process. They are used also in liquid process control and leakage detection applications.

    By Spire Metering Technology based in Marlborough, MASSACHUSETTS (USA).

  • Premium

    Customized Solutions for surface water treatment industry

    WesTech offers a holistic approach to surface water treatment for potable use. Depending upon the raw water quality, the flow rate, and operational preferences, WesTech can provide conventional flow, combination treatment units, packaged systems, high-rate processes, or even customized solutions.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Water Treatment Solutions for Iron & Manganese Removal

    For treatment of Iron & Manganese removal, AdEdge Technologies uses our AD26 or ADGS+ media coagulation filtration with ferric chloride as the coagulation agent. This process allows significantly higher flow rates per square feet of media, less backwash water than other conventional approaches, and smaller footprint systems which means lower capital and operating costs. There are no hazardous chemicals or waste involved and the systems may be automated which decreases operator involvement and expense.

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

  • Premium

    Ozone Water Treatment for Filamentous sludge

    Filamentous sludge is a common problem at activated sludge plants. With ozonation of the return sludge flow it is possible to reduced the amount of filamentous bacteria in the sludge and significantly increased the settling properties of the sludge.This in turn means better performance of the activated sludge process. When a bioreactor is connected to the sludge line the removal of the damaging filamentous bacteria means higher quality sludge in the bioreactor, which leads to higher biogas production.

    By Primozone Production AB based in Löddeköpinge, SWEDEN.

  • Premium

    Monitoring of hydrocarbons in bilge water

    Various processes onboard ships, such as machinery wash-down, maintenance, and leakage, generate oily wastewater. This contaminated water flow collects in the bilge of the ship. Marine diesel, lubricating oils, grease, as well as other contaminants may be present in bilge water. The bilge water is discharged overboard, with oil and grease concentrations in the discharged water limited by national and international regulations.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • EDI Solutions

    QUA’s FEDI® (Fractional EDI) stacks have superior hardness tolerance compared to the other EDI products on the market. With a dual voltage process this allows for a higher flexibility and tolerance to inlet water conditions, thus lowering the risk of scaling, and improving the plant's design economics and reliability. FEDI stacks are available in three different models which can be applied either for higher hardness tolerance or high water flow rates. MEGA FEDI stacks are ideal for large capacity, high flow systems normally required in heavy industrial projects such as power, petrochemicals, & electronics for high purity water needs. Each stack can handle treated water flow of up to 75 GPM . MEGA FEDI’s unique stackable design minimizes piping, reduces footprint, and makes it simple and easy to install on skids. FEDI-Rx products are specially designed for applications in pharmaceutical, biomedical and laboratory applications where installations require hot water sanitization to meet

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Thickening and dewatering of sludges for water and wastewater industry

    Both economic and ecological demands make maximum dewatering of sludge a most crucial step in the process flow, especially for the pulp and paper industry with their large quantities of sludge to handle. A highest possible dry content of dewatered sludge minimizes weight and volume, hence achieving the following objectives: reduction of transport and disposal cost. high heating value for incineration without additional fuel. With the sludge dewatering systems including both AKSE S disc thickener and AKUPRESS BX screw press BELLMER KUFFERATH Machinery offers plant and equipment able to dewater structured sludges to maximum dry contents.

    By BELLMER KUFFERATH Machinery GmbH based in Düren, GERMANY.

  • BOD and COD Removal

    Hydrogen peroxide (H2O2) has been used to reduce the BOD and COD of industrial wastewaters for many years. While the cost of removing BOD / COD through chemical oxidation with hydrogen peroxide is typically greater than that through physical or biological means, there are nonetheless specific situations which justify the use of hydrogen peroxide. These include: Predigestion of wastewaters which contain moderate to high levels of compounds that are toxic, inhibitory, or recalcitrant to biological treatment (e.g., pesticides, plasticizers, resins, coolants, and dyestuffs); Pretreatment of high strength / low flow wastewaters – where biotreatment may not be practical – prior to discharge to a Publicly Owned Treatment Works (POTW);Enhanced separation of entrained organics by flotation and settling processes; and Supply of supplemental Dissolved Oxygen (DO) when biological treatment systems experience temporary overloads or equipment failure. http://www.h2o2.com/industrial/applications.aspx?pid=104&name=BOD-COD-Removal

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Premium

    Real-time Control System for Wastewater Treatment Plants

    Wastewater treatment plants (WWTP) are subject to large variation in flow and load, not to speak of uncertainties on the composition of the incoming wastewater. On top of that, the activated sludge treatment process, as used by the vast majority of treatment plants, is difficult to control due to the complex behaviour of the biological process. Nevertheless WWTPs are run 24/7, with operators and management challenged to meet ever tightening environmental regulations.

    In order to meet the operational demands of modern-day plants, a new control system was developed. Proprietary control algorithms were introduced based on a large set of data from nutrient measurements in various WWTPs. The customer`s benefits are twofold: (1) achieving optimum effuent quality and, at th same time, (2) lowering energy needs and dosing of commidity chemicals.

    By AppliTek NV based in Nazareth, BELGIUM.

  • EPR waste minimisation monitoring for wastewater treatment industry

    The EPR regulations have replaced the IPPC regulations and are effective from May 2009 for qualifying companies within the industrial sector and October 2009 within the water sector. They will progressively require industry to minimise waste, reduce product loss and implement improved process control. The legislation will require the operator to self monitor processes and discharges, to demonstrate effective control with particular emphasis on EPR compliance and prevention. The regulating Agency will operate a point scoring system to assess operators under the OMA-3 program and this will be used to identify how well a company is managing their processes and possibly identify areas for improvement. The Environmental Permitting Regulations require industry to install instrumentation (MCERTS approved where available) to report water quality. EPR compliance monitoring may include automatic water sampling, flow measurement, pH, turbidity and TOC water analysis. Industry will need to identify point of source emissions, take steps to correct inefficient control and alarm unacceptable process deviations. Although the legislation focuses on environmental improvement, good housing keeping also makes a lot of sense. Optimisation of process control minimises waste, reduces treatment costs and ultimately saves money.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • StormData™ - Radar rainfall for real-time and analytical applications.

    Accurate estimation of the spatial distribution of rainfall is critical to successfully model hydrologic processes. OneRain has worked with engineering firms and those with responsibilities in Stormwater and Wastewater Management across the U.S. to provide radar rainfall data to help characterize storm events or flow problems in collection systems and as a basis for both real-time and design-oriented modeling. OneRainware products and services offer: *Real-time gauge-adjusted radar rainfall (GARR) data *Real-time area-average rainfall *Real-time forecast rainfall *End-of-month archive quality gauge-adjusted radar rainfall data *Historical and post-event analysis using archived rainfall estimates *Web-delivered calibrated radar-rainfall data *StormProperties™ Analysis. GARR data are used in flood warning, runoff modeling, basin modeling, I/I studies, litigation, real-time control, design storms, and National Pollutant Discharge Elimination System (NPDES) compliance activities.

    By OneRain Incorporated based in Longmont, COLORADO (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you