Only show results available in Virginia? Ok

process water production Applications

  • Premium

    Process Analytics - Water Purification (THORNTON)

    THORNTON specializes in measurements for pure and ultrapure water treatment with parameters of resistivity, conductivity, total organic carbon (TOC), flow, pH, ORP, dissolved oxygen and ozone. THORNTON products are frequently used in semiconductor and microelectronics manufacturing, pharmaceutical and biotechnology processing, and power and steam generation, as well as food and beverage production.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Chemical Water Treatment for process chemicals

    Kurita Water Solutions provides oil refineries and petrochemical plants with all the chemical additives used directly in the process, to fight the problems caused by the composition of the crude oil and the intermediate products. In oil refineries and petrochemical plants the goal is to improve efficiency and to optimise the production capacity.

    By Kurita based in Ludwigshafen, GERMANY.

  • Premium

    Ultraviolet Disinfection for Process Water

    Water is often used as a product, or as part of the manufacturing process. In many industrial applications, processes are chemical (chlorine) intolerant, and UV is widely adopted. atg UV Technology engineers will be pleased to discuss solving disinfection problems with you. As well as a powerful disinfectant, UV is used to remove chlorine, chloramines, ozone, bromine, and a wide variety of contaminants from industrial process water. Within micro-electronics facilities for example, UV is used to remove Total Organic Carbon (TOC) from ultra pure rinse water.

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Water treatment for meat processing

    Water is one of the single biggest raw materials used in meat processing, and its quality is of great importance to prevent contamination of food product. The use of contaminated water in the processing plant can spread infection across the whole food batch. This is a cause of serious concern to the food industry, consumers and regulatory bodies, besides that, it causes financial losses and food scare. Chlorine dioxide, a very powerful biocide, has a number of advantages over other products commonly used in the meat processing industry. When properly applied, chlorine dioxide can act as a break in contamination thereby reducing/eliminating cross contamination as well as removing superficial microorganisms before they have an opportunity to become attached and penetrate the carcass.

    By Applied Oxidation LLC based in Chattanooga, TENNESSEE (USA).

  • Premium

    Online Monitoring for the Demi-Water Production Industry

    Demineralization is the process of removing mineral salts as well as organic impurities from water by means of ion-exchange and can be found in various industries such as the chemical, food & beverage, irrigation and filtration industries. The consuming side of the industry relies on ever increasing quality and availability of demi-water while the manufacturers have to balance cost/output. AppliTek provides high quality analytical tools to increase process efficiency and quality control. Continuous measurements with high accuracy are carried out on the critical QC/QA parameters of the deionizing process:

    • Silica
    • Low sodium
    • Total Organic Carbon

    By AppliTek NV based in Nazareth, BELGIUM.

  • Water-Wastewater Measurements / NO analyzers for measurement of nitrification processes

    NO analyzers for measurement of nitrification processes applied for treating high concentration nitrogen wastewaters by microbial nitric oxide production. Also, the conversion of N-nitrosomines to nitric oxide for the quantification of those compounds in wastewater impacted waters. View Water-Wastewater Measurement Products

    By ECO PHYSICS INC. based in Duernten, SWITZERLAND.

  • Ozone Water Treatment for Activated Sludge Process Plants

    Ozone breaks up filaments and improves settling characteristics of the sludge... Filamentous sludge is a common problem at activated sludge plants. With ozonation of the return sludge flow it is possible to reduced the amount of filamentous bacteria in the sludge and significantly increased the settling properties of the sludge.This in turn means better performance of the activated sludge process. When a bioreactor is connected to the sludge line the removal of the damaging filamentous bacteria means higher quality sludge in the bioreactor, which leads to higher biogas production.

    By Primozone Production AB based in Löddeköpinge, SWEDEN.

  • Acid Regeneration Process

    Acid Regeneration Process The commercially most relevant field of application for HCl regeneration processes is the recovery of HCl from waste pickle liquors from carbon steel pickling lines. Other applications include the production of metal oxides such as, but not limited, to Al2O3 and MgO as well as rare earth oxides by pyrohydrolysis of aqueous metal chloride or rare earth chloride solutions. A number of different process routes are available. The most widely used is based on pyrohydrolysis and adiabatic absorption of hydrogen chloride in water, a process invented in the 1960s. However tightening environmental standards and stringent air permit policies render it increasingly difficult to establish new pyrohydrolysis based acid regeneration plants.

    By Insheng Engineering Co., Ltd based in Pingtung, TAIWAN.

  • Premium

    Gas monitoring instruments and systems for process NOx measurement

    Nitric acid HNO3 is an important intermediate reagent for production of several important end products, such as fertilizers, explosives, dyestuffs/pigments, pesticides, pharmaceuticals, photographic materials, plastics, and synthetic fibers. At nitric acid manufacturing plants, the Gasmet™ FTIR Gas Analyzer can be used to measure several gaseous components from the process stream for purposes of process control. A single system can be used to measure the high levels of nitrogen monoxide NO and nitrogen dioxide NO2, as well as water vapor H2O, nitrous oxide N2O, carbon monoxide CO, carbon dioxide CO2 and ammonia NH3. The fixed installation products for these purposes are the Gasmet™ CEM II measurement system, and the Gasmet™ FCX Gas Analyzers, both of which utilize the FTIR measurement technique for simultaneous multicomponent analysis of the sample gas.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Water treatment chemicals for the automotive industry

    Immense global competition has compelled the automobile industry to optimize processes and improve energy efficiency. Continuous and effective production processes are key factors to meeting these challenges. Kurita is your competent partner for all questions concerning water and waste water management as well as paint detackifying. With more than 60 years of experience, we offer the most technically up-to-date water and process treatment solutions. Our highly qualified engineers will gladly advise you on how to increase plant lifecycle and reduce energy costs.

    By Kurita based in Ludwigshafen, GERMANY.

  • Ozone/UV systems for drinking water treatment

    Multiple treatment reactions and benefits are obtained at ozonation, all at the same time. Ozone based advanced oxidation processes are important because of reactions with organic molecules that are not readily oxidized by ozone. One challenge beverage suppliers face is the need to deliver a product free of bacteria and with extended shelf life. Because of its powerful disinfectant properties, environmentally clean treatment process and its oxidative ability, ozone has become the technology of choice among water bottlers worldwide.

    By Lifetech based in Brno, CZECH REPUBLIC.

  • Aquatech Oil Sands-Produced Water Treatment

    For most oil sand recovery is accomplished with in-situ thermal processes like Steam Assisted Gravity Drainage (SAGD) and Cyclic Steam Stimulation (CSS), where steam and chemicals are injected to the liquefy the bitumen. The treatment and recycling of the produced water used in this process has a direct impact on the cost of oil production. Aquatech provides water treatment technologies that includes the recycling of the produced water used the process which has a direct impact on their the cost of oil production.

    By Aquatech International Corporation based in Canonsburg, PENNSYLVANIA (USA).

  • Cavity pump for water and wastewater industry

    For more than 75 years, Moyno progressing cavity pumps have been successfully applied and widely used in the industrial and municipal wastewater treatment industry. Over the years Moyno has continually enhanced the design and operational performance of its products to innovate wastewater treatment solutions. Moyno provides an effective combination of products, process solutions and service support programs to keep plant operations running smoothly and efficiently with little downtime and minimal maintenance. Moyno also provides a broad offering and custom product design capabilities for critical application requirements.

    By Moyno, Inc. based in Springfield, OHIO (USA).

  • EDI Solutions

    QUA’s FEDI® (Fractional EDI) stacks have superior hardness tolerance compared to the other EDI products on the market. With a dual voltage process this allows for a higher flexibility and tolerance to inlet water conditions, thus lowering the risk of scaling, and improving the plant's design economics and reliability. FEDI stacks are available in three different models which can be applied either for higher hardness tolerance or high water flow rates. MEGA FEDI stacks are ideal for large capacity, high flow systems normally required in heavy industrial projects such as power, petrochemicals, & electronics for high purity water needs. Each stack can handle treated water flow of up to 75 GPM . MEGA FEDI’s unique stackable design minimizes piping, reduces footprint, and makes it simple and easy to install on skids. FEDI-Rx products are specially designed for applications in pharmaceutical, biomedical and laboratory applications where installations require hot water sanitization to meet

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Microbial testing for personal care products sector

    The Problem: Microorganisms. personalcareMicrobiological contamination is a threat to product quality and process integrity in the personal care products and life sciences manufacturing industries – the purity of raw materials including water is essential to ensure manufacturing compliance. Microorganisms may be introduced at several stages of the process; subsequently, manufacturers must put in place stringent Quality Assurance / Quality Control (QA/QC) programs to manage microbiological contamination.

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • High-calcium lime slurry for industrial (chemicals & food processing) sector

    Lime is used in many industrial applications to treat plant processing water and as a key ingredient in the production of chemicals and the food processing industry.

    By Sudbury Lime Ltd. based in Copper Cliff,, ONTARIO (CANADA).

  • In-process and preshipment inspection, testing and expediting of mechanical and electrical equipment for the hydropower industry

    INSPECTEAM Hydro performs the surveillance of your suppliers on your behalf by offering inspection and expediting services across Europe. Such as supervision, in-process and preshipment inspection and testing and expediting of mechanical and electrical equipment for the Hydropower industry. INSPECTEAM Hydro’s scope of work is to ascertain that products and materials meet the contract requirements, by ensuring that they conform to the design and standards specified by our clients in the purchase order and in the other contractual agreements. We have a team of qualified engineers and quality/NDT inspectors, experts in the energy sector and especially in the hydropower and water resources industry. Our team is subject to a continuous training program and offers our clients the highest technical competence and professional skill.

    By Inspecteam Hydro based in Godstone, UNITED KINGDOM.

  • Premium

    Water treatment chemicals for the steel and coke industry

    The many production facilities within the steel industry, e.g. the blast furnace, converter, continuous caster, hot and cold strip mills and the coke oven plant require immense quantities of water for the cooling circuits and for gas scrubbing. During the last few years, the majority of steel plants have managed to significantly reduce freshwater usage per ton of steel through water recycling and process optimization. However, the high water quality standards required for the water circuits and regulations for waste water remain unchanged, resulting in an increased demand for professional water treatment.

    By Kurita based in Ludwigshafen, GERMANY.

  • Water treatment for the mining industry

    Water is an integral part of the mining and metal production process. Large quantities of water are required in sufficiently high quality for all areas of mine operations from exploration, mining, processing, smelting and refining. The requirement to provide treated raw water through to water reuse.

    By De Nora Water Technologies based in Colmar, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you