Only show results available in Virginia? Ok

process water reuse Applications

  • Premium

    Water reuse for the food industry

    Especially in the food industry large volumes of water are consumed. This process water is often discharged directly or discharged after passing a wastewater treatment station. Due to the increasing costs of (process)water companies try to reduce the water consumption mainly through reuse. An important aspect of this development is to comply with the high water quality standards.

    By Colsen International b.v. based in HULST, NETHERLANDS.

  • Process Design

    Custom water and wastewater engineering, consulting and process design services to prevent air, land, water and environmental pollution. We rework systems as processes change and troubleshoot where necessary to bring systems into compliance. • High purity and process water • Biological nutrient removal • Solids treatment • Toxicity reduction • Industrial treatment • Advanced oxidation and alternative disinfection • Effluent reclamation and reuse • Land application systems • Natural treatment systems • Hydrogen sulfide and odor control • Decentralized treatment systems • Process optimization / operations assistance • Conceptual and strategic water planning

    By Yates Environmental Services based in Spokane, WASHINGTON (USA).

  • Premium

    MPP water purification systems for industrial waste and process water application

    Removal of total spectrum of non-polar and polar hydrocarbons proven in practice: MPPE removes toxic, non-polar, non biodegradable compounds, aromatics, poly aromatics, halogenated, chlorinated, PCBs, THT (TetraHydroTiophene), Dioxins, CS2 etc. Folowed by biotreatment removing polar biodegradable compounds. Optional: UF and/or activated carbon filtration and RO for reuse as process or boiler feed water.

    By VWT Techno Center Netherlands B.V. - MPP Systems based in Ede, NETHERLANDS.

  • Biological wastewater processes for mining

    The mining industry has the potential to use large amounts of wastewater in its operations. Often times these waste streams contain contaminants that require treatment before the water can be re-used or discharged. Biowater has successfully installed highly efficient biofilm treatment processes including our complete mix fixed film (CMFF®) system to remove BOD/COD, and nitrogen from mining waste streams. Biowater’s technologies, such as our CFIC® process, can produce effluent water quality that is acceptable for re-use, reducing the stress on ecosystems in water stressed areas.

    By Biowater Technology based in Cumberland, RHODE ISLAND (USA).

  • Premium

    Utility Water Treatment

    It makes economic sense to reuse process water. Why would you discharge water just because you've used it once? If this water is treated properly, it can be reused with ease, cutting costs in no time.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY.

  • Water Disinfection for Municipal Water Treatment

    As one of the world`s most precious natural resources, the reuse of water is becoming increasingly important. MIOX is both the most cost-effective solution and the preferred technology for disinfection and oxidation of wastewater for reuse or reintroduction into the environment. MIOX`s hypochlorite generators offer a safer, technologically superior solution to wastewater treatment, virtually eliminating many of the negative problems associated with traditional chlorine disinfection. Safer, economical and significantly more effective, MIOX is revolutionizing the process of making water safe again.

    By MIOX Corporation based in Albuquerque, NEW MEXICO (USA).

  • Premium

    Actuators for the water & sewage industry

    Water treatment and distribution offers significant opportunities for Rotork. With climate change affecting the availability of water in many areas of the world, there is an increasing need for processes which will maximise existing resources such as desalination plants and water re-use projects.

    By Rotork based in Bath, UNITED KINGDOM.

  • Municipal Wastewater treatment for drinking water

    As one of the world`s most precious natural resources, the reuse of water is becoming increasingly important. MIOX is both the most cost-effective solution and the preferred technology for disinfection and oxidation of wastewater for reuse or reintroduction into the environment. MIOX`s hypochlorite generators offer a safer, technologically superior solution to wastewater treatment, virtually eliminating many of the negative problems associated with traditional chlorine disinfection. Safer, economical and significantly more effective, MIOX is revolutionizing the process of making water safe again.

    By MIOX Corporation based in Albuquerque, NEW MEXICO (USA).

  • Industrial and commercial water filtration for effluent water treatment

    Through experience we have found that when the correct water filtration system is put into place as an integral part of the effluent water treatment process our customers have been able to experience several benefits:- Enabled water to be re-used in other areas of their operations as part of the effluent treatment process.

    By Hydro-Gen Engineering Ltd based in Widnes, UNITED KINGDOM.

  • Floating Cover – Water

    Hexa-Cover Floating Cover provide an ideal cover for all forms of water i.e.: Reservoirs for Fire Protection Reservoirs for Fire Protection, Spill over tanks Spill over tanks, Wastewater Wastewater tanks, reservoirs, Cooling water Cooling water, Process water Process water, Reserve water reservoirs Reserve water reservoirs, Compensation tanks Compensation tanks, Irrigation Reservoirs for Irrigation, Collected surface water Reservoirs for reuse of collected surface water, Water settlement lagoons Water settlement lagoons, Storm water ponds Storm water ponds, Bird deterrent Bird deterrent, Drinking troughs Drinking troughs.

    By Hexa-Cover A/S based in Thisted, DENMARK.

  • Water treatment for golf

    The compromised quality of traditional golf course irrigation water sources and the ever-increasing cost of municipal water present golf course owners, operators and superintendents with issues affecting irrigation supply, cost and availability. With our staff of golf industry professionals, golf course superintendents and consultants, along with our water treatment process, application and decades of engineering experience, we have the expertise and flexibility to select the best, most cost-effective solution for addressing any golf market irrigation water treatment application. Whether it’s suspended solids removal via filtration to the treatment of brackish waters due to salt water intrusion, treatment of municipal and industrial wastewater to acceptable reuse quality, or complete sea water desalination systems, Watertronics provides state-of-the-art pumping and overall golf course irrigation water management solutions.

    By Lindsay Corporation based in Omaha, NEBRASKA (USA).

  • Aquatech Enhanced Oil Recovery (EOR)

    In a Steamflood Enhanced Oil Recovery (EOR) process, steam is injected in the well, lowering the viscosity of heavy oil suitable for extraction through the production wells. The fluid from the wells is a mixture of oil, water and gas and goes through a separation system to separate the three. The separated produced water is heavily contaminated with dissolved solids and hydrocarbons. Aquatech’s Steamflood Enhanced Oil Recovery (EOR) Technology offers the integrated solutions for the treatment EOR produced water for boilers, generating a purified product that can be reused for the production and injection of steam. Our turnkey approach to treatment includes coordinating the logistics of wastewater removal off-site and any sludge disposal.

    By Aquatech International Corporation based in Canonsburg, PENNSYLVANIA (USA).

  • Premium

    Water quality monitoring for semiconductor industry

    Water is fundamental to the manufacturing process in a semiconductor facility. Electronic components are rinsed or washed several times during the producing process with ultrapure water (UPW) to remove residue. Continuous monitoring of organic constituents (TOC) on the influent city water assist with UPW production. Good quality waste streams for the manufacturing process can also be monitored for reuse potential.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Premium

    Water treatment for power plants

    The process of electricity generation from fossil fuels such as coal, oil and natural gas is water-intensive. Between 40-50% of all water abstracted and used in developed countries is used in the generation of electricity. Thus, a reliable, abundant and predictable source of raw water supply to a power plant is a critical factor in site selection. Water supplies are required to provide various process waters for the following essential main purposes such as make-up water, cooling water for steam turbine condensers, and auxiliary plant cooling water.

    The primary application of modern water treatment technology is to maintain the integrity and performance of the power plant. Critical plant applications have water purity or conditioning requirements that must be adhered to for safe, reliable and efficient power generation.

    Experience has shown that integration of water technology treatments with power plant design can be very important in reducing operational problems and component failures 

    At power plant worldwide there are increasing limitations on water availability and environmental restrictions on discharges. This is expected to promote measures for water conservation and to have an increasing influence on water treatment decisions. At power plant, the recycling of internal wastewater streams can extend from the recovery of individual high-quality waste streams, which can be reused either directly or after only limited treatment, through to the development of fully integrated water/wastewater treatment systems for zero liquid discharge. However, the application of reuse schemes requires site-specific assessment, as not all waters may be viable options for recovery.

    By De Nora Water Technologies based in Colmar, PENNSYLVANIA (USA).

  • Industrial water treatment for the mining industry

    Water is indispensable for the mining industry. Water is both in the process and also generated by the process. Controlling the quality of the water and treating the waste waters for reuse is essential to this industrial market. Aquatech, a global water treatment leader, has more than 30 years of expertise in industrial water treatment solutions. Our wide range of technologies, services and knowledge can help solve the water issues for the mining industry.

    By Aquatech International Corporation based in Canonsburg, PENNSYLVANIA (USA).

  • Zero Liquid Discharge wastewater solution

    Zero Liquid Discharge (ZLD) describes a process that completely eliminates liquid discharge from a system. The goal of any well-designed ZLD system is to minimize the volume of wastewater that requires treatment, process wastewater in an economically feasible manner, while also producing a clean stream suitable for reuse elsewhere in the facility. Interest in ZLD technology has grown in the industrial manufacturing sector over the past decade. Companies may begin to explore ZLD because of ever tightening wastewater disposal regulations, company mandated green initiatives, public perception of industrial impact on the environment, or concern over the quality and quantity of the water supply.

    By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).

  • Water treatment research for microelectronics industry

    As devices get smaller and the fabrication plants get larger, the purity of the water required for ultrapure water systems increases. In terms of water reuse, the industry has relatively conservative attitudes towards recycling water for ultrapure water applications, but wastewater is treated and reused for cooling and other less critical purposes. Besides semiconductors, two other silicon-based sectors of the microelectronics industry need large volumes of highly pure water: flat panel displays (FPD) and photovoltaics (PV). Although, both sectors are in the process of maturing we anticipate that the increasing complexity of FPD and PV devices will create demand for even higher purity water.

    By Global Water Intelligence (GWI) based in Oxford, UNITED KINGDOM.

  • Water treatment research for refining and petrochemicals industry

    Refining processes like distillation use high quality steam that must be generated from ultrapure water. Advanced wastewater treatment technologies will help the industry meet tough regulations concerning hazardous waste products from process operations. As the industry expands into water-scarce areas in India, China and the Middle East, marginal sources can help meet the demand for water. Desalination and reuse technologies will secure a reliable source of water and help the industry manage its water impact. Water technology suppliers have the opportunity to tap into a market worth $768 billion.

    By Global Water Intelligence (GWI) based in Oxford, UNITED KINGDOM.

  • Water treatment research for food and beverage industry

    Direct reuse of wastewater in the product is not on the menu in the food and beverage industry, but the reuse of water for other purposes (e.g. washing) is now a priority. Most major F&B companies have made commitments to reduce their water consumption per unit of product, and reuse is an important part of the strategy for achieving this. Furthermore much of the growth of the industry is in emerging markets which typically have more limited, lower quality water resources than developed countries, creating water treatment challenges. In developed markets, emerging concerns about pharmaceutical by-products and other trace contaminants making their way into the product have lead to greater use of desalination technologies on the process water side. Value from waste propositions such as energy recovery, water reuse (not within the product) and materials recovery ensure that investment in water technology benefits the bottom line.

    By Global Water Intelligence (GWI) based in Oxford, UNITED KINGDOM.

  • Premium

    Hazardous waste treatment solutions for metal industry

    Sludge by-products from the metalworking industry have a high potential for recycling. Prolonged grinding processes can generate large amounts of highly valuable, alloy-rich sludge; consisting of metal powder and cooling lubricants. Inside our VacuDry system, the thermal separation of the liquids (hydrocarbons, eventually water) and solids (metal powder) takes place in an oxygen free atmosphere. This absence of oxygen ultimately eliminates material degradation by oxidation, and self-ignition or explosion risks. Operation under a low vacuum ensures the possibility to recover the cooling lubricants for later reuse. After the thermal treatment, for appropriate handling in the melting process, the metal powder is pressed into briquettes. With the econ VacuDry technology, 100% recycling of all ingredients is possible.

    By econ industries GmbH based in Starnberg, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you