Only show results in Virginia? Ok

process water system Applications

  • Premium

    Ultraviolet disinfection systems for the process water

    Water is often used as a product, or as part of the manufacturing process. In many industrial applications, processes are chemical (chlorine) intolerant, and UV is widely adopted. atg UV Technology engineers will be pleased to discuss solving disinfection problems with you. As well as a powerful disinfectant, UV is used to remove chlorine, chloramines, ozone, bromine, and a wide variety of contaminants from industrial process water. Within micro-electronics facilities for example, UV is used to remove Total...

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Premium

    Water Treatment for Industrial Process

    Among the various industrial treatment options available for heavy metal reduction, few are simple, proven, affordable, and reliable as the selective adsorption treatment technology offered by AdEdge Technologies. AdEdge provides a line of pre-engineered, packaged industrial wastewater treatment systems designed for removal of heavy metals from groundwater and industrial wastewater using a variety of adsorption media technologies.

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

  • MPP water purification systems for industrial waste and process water application

    Removal of total spectrum of non-polar and polar hydrocarbons proven in practice: MPPE removes toxic, non-polar, non biodegradable compounds, aromatics, poly aromatics, halogenated, chlorinated, PCBs, THT (TetraHydroTiophene), Dioxins, CS2 etc. Folowed by biotreatment removing polar biodegradable compounds. Optional: UF and/or activated carbon filtration and RO for reuse as process or boiler feed water.

  • Premium

    Chemical Water Treatment for cooling and processing water

    An optimal heat transfer is the most important point in every water cooled process. Scale, corrosion and biofouling negatively affect the heat transfer. Therefore Kurita develops for cooling and process water systems customized solutions, based on the combined treatments of scale & fouling prevention, corrosion inhibition, and biocides.

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Ultraviolet disinfection systems for the advanced oxidation processes (AOP)

    Advanced Oxidation reactions are an extension of the process whereby UV alone is used to reduce Total Organic Carbon (TOC) through the lysing of water molecules into hydroxyl radicals. Hydroxyl radicals (OH) are produced with the help of one or more primary oxidants (usually ozone or hydrogen peroxide) and ultraviolet light. This reactive species is the strongest oxidant that can be applied in water and can oxidize virtually any compound present in the water.

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Premium

    Process water treatment

    Process water covers the wide range of boiler feed water, cooling water for heat exchangers or engine, chemicals dilution, etc. It should typically have a conductivity ranging from 0,1 to 50 uS/cm, with little to no hardness to avoid scaling in heating system. Oxygen and carbon dioxide should be removed to prevent corrosion. Depending on your application, the water quality requirements can vary: Boiler feed water characteristic. Cooling water quality. Tap water or fresh groundwater are the most widely used...

    By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.

  • Recycling and processing of WEEE

    Next to processing shredder light and heavy shredder fraction the Ad Rem machinery is also capable of processing waste of electrical and electronic equipment. WEEE can be processed on the same machinery as ASR is processed without any modifications. This makes it possible to get more input into the system and therefore costing less per ton.

    By AD REM N.V. (Valtech Group) based in Menen, BELGIUM.

  • Cooling Towers and Process Water System Cleaning Applications Using Hydrogen Peroxide

    The unique properties of hydrogen peroxide (H2O2) make it a good technology for keeping cooling loops, process water loops and heat exchangers clean from fouling that can occur due to various contaminants in the water. Hydrogen peroxide works well in removing organic fouling on surfaces through mechanical means and in specific applications through biocidal mechanisms. Hydrogen peroxide can be used in a shock treatment mode where it is fed based on a timer set-up. It can also be used occasionally at higher...

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Premium

    Process instrumentation and analytics solutions for water and wastewater industry

    As one of the world’s leaders in industry automation and an experienced provider of integrated technologies, we offer products and systems tailored to the requirements of the water and wastewater industry.

    By Siemens Industry, Inc. - Process Analytics based in Houston, TEXAS (USA).

  • Microbial testing for industrial process water sector

    Real-time Information for Same Shift Problem Solving! Don`t take chances on microbiological contamination! Through fast, portable, and accurate testing, LuminUltra`s QuenchGone21 Industrial (QG21I™) test kit instantly measures the total microbiological content in industrial process waters to detect emerging growth and locate the source of contamination. This takes the guess-work out of managing process water systems and aids with disinfection and cleaning cycles. LuminUltra`s QG21I test is the ideal tool to help...

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Premium

    Chemical Water Treatment for boiler water & heating systems

    In nearly all industrial areas steam is needed for different aims e.g. steam for process side, heating purpose or the generation of electricity. To reach the best efficiency of the boiler system an optimal boiler water treatment is essential. Disturbances in boilers caused by deposits, scaling, corrosion, local overheating or carryover into the steam reduce the operating safety and could lead to tremendous economic damages. Kurita delivers innovative technologies to prevent scale and corrosion in the whole...

    By Kurita based in Tokyo, JAPAN.

  • Process Design

    Custom water and wastewater engineering, consulting and process design services to prevent air, land, water and environmental pollution. We rework systems as processes change and troubleshoot where necessary to bring systems into compliance. • High purity and process water • Biological nutrient removal • Solids treatment • Toxicity reduction • Industrial treatment • Advanced oxidation and alternative disinfection • Effluent reclamation and reuse • Land application systems • Natural treatment systems •...

    By Yates Environmental Services based in Spokane, WASHINGTON (USA).

  • Water treatment for food processing

    Most food processing facilities currently use a combination of different chemicals for all surface and machine disinfection. They periodically rotate the use of different sanitizers to prevent the harmful microorganisms from building a resistance to their killing properties. Unfortunately facilities are still experiencing pathogen outbreaks. Chlorine dioxide’s unique killing ability does not allow for the build up of resistance or mutation, and therefore eliminates the need for all of the other chemicals....

    By Applied Oxidation LLC based in Chattanooga, TENNESSEE (USA).

  • Biological wastewater processes for municipal treatment plants

    Biowater have knowledge and competence to help in designing and building new systems and upgrade existing infrastructure based on biotechnology as CFIC, MBBR and IFAS solutions.

    The Company offers cost-effective solution that allows municipal plants to both increase their treatment capacity and upgrade the effluent quality with minimal civil works.

    By Biowater Technology AS based in Tonsberg, NORWAY.

  • Process monitoring and controlling for wastewater treatment industry

    Automation can save money, optimise a process and give warning of potential breeches of discharge consent. However, instrument selection is fundamentally important if a control system is to function efficiently. The measurement device must accurately and quickly respond to process variations and it must be reliable in operation if the control system is to function as intended. Designed properly, energy and chemical use can be significantly reduced, saving money and ultimately improving effluent quality.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Premium

    Recirculation systems for filtration

    The appropriate quality of water supplied to a process with a re-circulating system allows for the following: Savings as a result of the amount of water used. Increases the amount of water available. Decreases costs of waste water disposal (and unwanted spills). Maintains a high quality of product.

    By Sistema Azud, S.A. based in Alcantarilla, SPAIN.

  • Premium

    Wet and dry cooling systems for Water and waste water treatment industry

    ENEXIO Water Technologies delivers efficient solutions for industrial and municipal water and waste water treatment. They include process calculation and design of the plant, delivery of fill media or lamella clarifiers and necessary auxiliaries such as support construction, launders, rotary distributors as well as supervision and on-site assembly equipment.

    By ENEXIO Water Technologies GmbH based in Hürth, GERMANY.

  • Premium

    Gas monitoring instruments and systems for process NOx measurement

    Nitric acid HNO3 is an important intermediate reagent for production of several important end products, such as fertilizers, explosives, dyestuffs/pigments, pesticides, pharmaceuticals, photographic materials, plastics, and synthetic fibers. At nitric acid manufacturing plants, the Gasmet™ FTIR Gas Analyzer can be used to measure several gaseous components from the process stream for purposes of process control. A single system can be used to measure the high levels of nitrogen monoxide NO and nitrogen...

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Water measurement systems & sensors for water quality monitoring

    Effective water quality monitoring is the key to environmental protection of watercourses and for reliable process control and wastewater treatment.  Discharge consents under EPR regulations dictate that water quality monitoring is undertaken to ensure that consented parameters are below the consented concentrations.  Traditionally this has been done using water quality sampling methods but increasingly automatic water quality measurement sensors linked to real-time telemetry is seen as the most...

    By Isodaq Technology - Hydro-Logic Group based in Bromyard, UNITED KINGDOM.

  • Innovative Pump Technology for Process Engineering Industry

    Modern process engineering in different industries provides a variety of applications for EDUR pump systems. In all cases it becomes evident that the issue of energy efficiency and the required optimum design of the pump system deserve great attention.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you