process water system Applications in Australasia

  • Premium

    Ultraviolet disinfection systems for the process water

    Water is often used as a product, or as part of the manufacturing process. In many industrial applications, processes are chemical (chlorine) intolerant, and UV is widely adopted. atg UV Technology engineers will be pleased to discuss solving disinfection problems with you. As well as a powerful disinfectant, UV is used to remove chlorine, chloramines, ozone, bromine, and a wide variety of contaminants from industrial process water. Within micro-electronics facilities for example, UV is used to remove Total...

    By atg UV Technology Distributor in Sydenham, NEW ZEALAND.

  • Premium

    Chemical Water Treatment for cooling and processing water

    An optimal heat transfer is the most important point in every water cooled process. Scale, corrosion and biofouling negatively affect the heat transfer. Therefore Kurita develops for cooling and process water systems customized solutions, based on the combined treatments of scale & fouling prevention, corrosion inhibition, and biocides.

    By Kurita Distributor in Cheltenham, AUSTRALIA.

  • Premium

    Ultraviolet disinfection systems for the advanced oxidation processes (AOP)

    Advanced Oxidation reactions are an extension of the process whereby UV alone is used to reduce Total Organic Carbon (TOC) through the lysing of water molecules into hydroxyl radicals. Hydroxyl radicals (OH) are produced with the help of one or more primary oxidants (usually ozone or hydrogen peroxide) and ultraviolet light. This reactive species is the strongest oxidant that can be applied in water and can oxidize virtually any compound present in the water.

    By atg UV Technology Distributor in Sydenham, NEW ZEALAND.

  • Microbial testing for industrial process water sector

    Real-time Information for Same Shift Problem Solving! Don`t take chances on microbiological contamination! Through fast, portable, and accurate testing, LuminUltra`s QuenchGone21 Industrial (QG21I™) test kit instantly measures the total microbiological content in industrial process waters to detect emerging growth and locate the source of contamination. This takes the guess-work out of managing process water systems and aids with disinfection and cleaning cycles. LuminUltra`s QG21I test is the ideal tool to help...

    By LuminUltra Technologies Ltd. Distributor in Banyo, AUSTRALIA.

  • Premium

    Chemical Water Treatment for boiler water & heating systems

    In nearly all industrial areas steam is needed for different aims e.g. steam for process side, heating purpose or the generation of electricity. To reach the best efficiency of the boiler system an optimal boiler water treatment is essential. Disturbances in boilers caused by deposits, scaling, corrosion, local overheating or carryover into the steam reduce the operating safety and could lead to tremendous economic damages. Kurita delivers innovative technologies to prevent scale and corrosion in the whole boiler...

    By Kurita Distributor in Cheltenham, AUSTRALIA.

  • Premium

    Air quality and industrial gas monitoring systems for Water treatment

    Treatment for drinking water production involves the removal of contaminants from raw water to produce water that is pure enough for human consumption without any short term or long term risk of any adverse health effect. Substances that are removed during the process of drinking water treatment include suspended solids, bacteria, algae, viruses, fungi, and minerals such as iron and manganese. Ozone (O3) gas is commonly used in this contaminant removal industrial process as an effective and economical oxidizer....

    By Teledyne API Distributor in AUSTRALIA.

  • Premium

    Gas monitoring instruments and systems for process NOx measurement

    Nitric acid HNO3 is an important intermediate reagent for production of several important end products, such as fertilizers, explosives, dyestuffs/pigments, pesticides, pharmaceuticals, photographic materials, plastics, and synthetic fibers. At nitric acid manufacturing plants, the Gasmet™ FTIR Gas Analyzer can be used to measure several gaseous components from the process stream for purposes of process control. A single system can be used to measure the high levels of nitrogen monoxide NO and nitrogen...

    By Gasmet Technologies Oy Distributor in AUSTRALIA.

  • Water quality monitoring systems for high water purifier industry

    The monitoring of “Ultra Pure Water” or “High Purity Water” requires the lowest possible detection limits for process analyzers. Resistivity is often around 18 MΩ. Dedicated instruments can detect infinitely small amounts (ppt e.g. parts per trillion) of ions.

    By SWAN Analytische Instrumente AG Office in Hornsby, AUSTRALIA.

  • Premium

    Ultraviolet disinfection systems for the flowback water treatment - shale gas

    Natural oil and gas extracted from shale rock formations has become one of the fastest-growing oil and gas sectors worldwide. Using a process known as hydraulic fracturing or `fracking` , the process requires large volumes of clean, sterile water to be injected into the shale formation to release the gas trapped between the rock.

    By atg UV Technology Distributor in Sydenham, NEW ZEALAND.

  • Sludge dewatering and water recovery from sand and aggregate washing processes

    Bilfinger Water Technologies designs and builds complete water recovery and slurry dewatering systems for sand and aggregate washing plants. These high-performance systems minimize water usage and solid disposal problems.

    By Aqseptence Group GmbH Office in Auburn Victoria, AUSTRALIA.

  • Premium

    Aeration and mixing technologies for activated sludge systems

    The activated sludge process uses a mass of organisms to aerobically treat wastewater and is used to remove biodegradable organics from both municipal and industrial wastewaters.

    By Aeration Industries International (AII) Distributor in AUSTRALIA.

  • Electrical Based Tomography Systems for Batch mixing

    Batch mixing generally refers to mixing processes in vessels and ITS tomography instrumentation provides a tool to understand, optimise and control mixing. Tomography sensors take data from between 200 to 2,400 measurement points in a single snapshot, thus providing a sound basis to monitor changes in concentration of different materials and so quantify mixing. Sensors can be retrofitted through using probe based instruments, scanning the z-axis (which usually presents the key challenge to effective mixing)....

    By Industrial Tomography Systems (ITS) Distributor in Mitcham, AUSTRALIA.

  • Premium

    Ultraviolet disinfection systems for the total organic carbon (TOC) reduction sector

    Total Organic Carbon (TOC) is found in all water supplies as naturally occurring organic matter. Over many years of experience, medium or low pressure UV treatment has become recognised as an effective process step in the breakdown and reduction of TOC in water intended for use in pharmaceutical, health care, power generation and micro-electronics applications. In the latter case, ultra-pure water is used to wash silicon wafers on which even small deposits of carbon compounds on the wafers can severely affect...

    By atg UV Technology Distributor in Sydenham, NEW ZEALAND.

  • Electrical Based Tomography Systems for Crystallisation/Precipitation

    Crystallisation is a key reaction in pharmaceutical and other process sectors. The combination of two ionic species in solution to form a solid frequently produces a strong change in electrical properties which can be tracked using ITS electrical resistance tomography sensors. Sensor arrays are produced on two different formats:

    By Industrial Tomography Systems (ITS) Distributor in Mitcham, AUSTRALIA.

  • Electrical Based Tomography Systems for Multiphase Flow

    Multiphase flows are complex and unpredictable however they have a significant bearing on the safety, costs and revenues of many processes – particularly in oil and gas, but also in aerospace, chemicals and other sectors.

    By Industrial Tomography Systems (ITS) Distributor in Mitcham, AUSTRALIA.

  • Electrical Based Tomography Systems for Slurry Flow

    Slurry transportation is required in a diverse range of sectors, from food to minerals processing; and oil sands processing to nuclear waste management. As a process it requires significant levels of energy and the abrasive nature of materials used can lead to ongoing issues of pipeline erosion.

    By Industrial Tomography Systems (ITS) Distributor in Mitcham, AUSTRALIA.

  • Water Contamination Detection

    Security of water assets is becoming an increasingly major issue that demands immediate and robust alarms for potential contamination. In addition to this, natural growth of algae is a common problem for water asset managers, the results of which can increase maintenance costs of water processing plants as well as directly effecting water taste. The CTG FastGuard fast repetition rate fluorometer analyses information on the physiological state of the algae it monitors within an in-line flow system. A number of...

    By Chelsea Technologies Group Distributor in AUSTRALIA.

  • Water Data Management Solution for Water & Wastewater Treatment

    KISTERS solutions provide powerful data management capabilities for water/wastewater treatment plant operators. Easily interfaced to existing SCADA and telemetry systems, KISTERS solutions provide superior graphical and tabular editing and reporting capabilities for your process data. KISTERS solutions are a “future proof” choice for your data historian.

    By KISTERS AG Office in Weston Creek, AUSTRALIA.

  • Monitoring of Algae in Drinking Water

    The UniLux in-situ fluorometer can be configured to detect a number of key parameters that are of importance to the Water Supply Industry. Primarily, the detection of Chlorophyll a in stored water systems, such as reservoirs, assists in the planning and informs decisions on water abstraction in relation to natural algae blooms that regularly occur throughout the year. As well as Chlorophyll a, these in-situ fluorometers can detect cyanobacterias, such as Phycocyanin and Phycoerythrin, which are often associated...

    By Chelsea Technologies Group Distributor in AUSTRALIA.

  • Gas infusion technology solutions for the water treatment industry

    Every municipality in the developed world has some form of water and wastewater treatment system. This varies from simple outfalls direct to the ocean to very sophisticated activated sludge plants with multiple unit processes dedicated to converting human waste, industrial effluents and storm runoff into clean water discharges and solids acceptable for some form of reuse. inVentures using its gas inFusion technology, has developed the gPRO system for the prevention and remediation of major algae blooms that...

    By inVentures Technologies Incorporated. Distributor in Alexandria, AUSTRALIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you