Only show results in Virginia? Ok

process water system Applications

  • Ozone/UV systems for drinking water treatment

    Multiple treatment reactions and benefits are obtained at ozonation, all at the same time. Ozone based advanced oxidation processes are important because of reactions with organic molecules that are not readily oxidized by ozone. One challenge beverage suppliers face is the need to deliver a product free of bacteria and with extended shelf life. Because of its powerful disinfectant properties, environmentally clean treatment process and its oxidative ability, ozone has become the technology of choice among water...

    By LIFETECH based in Brno, CZECH REPUBLIC.

  • Premium

    Filtration solutions for cooling systems

    The installation of AZUD filtration equipments allows the reduction of the total solids in suspension in the water, and: Helps to maintain an optimal efficiency of energy in the heat interchange process. Reduce the accumulation of particles in the components of the cooling systems. Reduce the growing of microorganisms. The higher or lower proliferation of these microorganisms is directly linked to the higher or lower availability of organic nutrients which favour the development of the same. When reducing the...

    By Sistema Azud, S.A. based in Alcantarilla, SPAIN.

  • Premium

    Ultraviolet disinfection systems for the flowback water treatment - shale gas

    Natural oil and gas extracted from shale rock formations has become one of the fastest-growing oil and gas sectors worldwide. Using a process known as hydraulic fracturing or `fracking` , the process requires large volumes of clean, sterile water to be injected into the shale formation to release the gas trapped between the rock.

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Water quality monitoring systems for high water purifier industry

    The monitoring of “Ultra Pure Water” or “High Purity Water” requires the lowest possible detection limits for process analyzers. Resistivity is often around 18 MΩ. Dedicated instruments can detect infinitely small amounts (ppt e.g. parts per trillion) of ions.

    By SWAN Analytische Instrumente AG based in Hinwil, SWITZERLAND.

  • Process Belt Meshes for Dewatering / Pressing with Belt Presses

    WEAVEinMotion process belts are effective and robust cores for belt presses which are particularly efficiently acting systems for dewatering sludges and fruit mashes. A decrease in transport, disposal and recycling costs is obtained thanks to the reduction in volume achieved.

    By GKD - Gebr. Kufferath AG based in Düren, GERMANY.

  • Compact Filtration for Grinding / Grinding Processes

    CompactFiltration - Filter systems for cooling lubricants used in grinding processes; Well-maintained cooling lubricants play an ever more important role in grinding processes, to ensure customers` requirements are met with regard to surface quality and adherence to tolerances.

    By GKD - Gebr. Kufferath AG based in Düren, GERMANY.

  • Pumping solutions for process industry pumps

    Samson liquid ring pumps are used frequently in the process industry. Samson Pumps manufacture a wide range of pumps for major producers of factory equipment and total systems for various industries around the world. Our pumps are often a core component of larger systems manufactured by our customers, and therefore it is always critical to choose the right pump for every specific application. Our sales team is ready to help you with selection of the best vacuum pump solution for any vacuum- and pressure proces.

    By Samson Pumps A/S based in Viborg, DENMARK.

  • Sludge dewatering and water recovery from sand and aggregate washing processes

    Bilfinger Water Technologies designs and builds complete water recovery and slurry dewatering systems for sand and aggregate washing plants. These high-performance systems minimize water usage and solid disposal problems.

    By Aqseptence Group GmbH based in Aarbergen, GERMANY.

  • Premium

    Anaerobic water purification systems for textile and tanneries

    Textile wastewater typically has high pH, high organic pollution, high salt concentration (in most cases sulphate), toxicity and colour. The composition of the wastewater varies per production process: desizing, scouring, dyeing and finishing produce completely different wastewater qualities.

    By Paques B.V. based in EL Balk, NETHERLANDS.

  • Gas analysis & monitoring systems for water - natural sciences

    In nature, the chemical elements can be represented by more isotopes, or atoms of the same element, characterized by a different number of neutrons in the nucleus. When the proton / neutron ratio does not exceed that value likely to upset the balance of the atom, resulting in the phenomenon known as stabilization of radioactive decay, the isotope is called stable. That is, over time, will not tend to emit energy and sub-nuclear particles to gain energy stability, giving rise, at the end of the process, the...

    By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY.

  • Premium

    Anaerobic water purification systems for metal and mining

    Sustainable metal recovery and water treatment. The metal and mining industry is increasingly aware of the opportunities to recover valuable resources from process and bleed streams. This combines creating revenues with environmental sustainability. The traditional method of removing dissolved metals and sulphate from aqueous process- and waste streams in the metal and mining industry is by neutralization with an alkaline agent like lime. The gypsum and metal hydroxides which are produced in this process complicate...

    By Paques B.V. based in EL Balk, NETHERLANDS.

  • Premium

    Real-time Control System for Wastewater Treatment Plants

    Wastewater treatment plants (WWTP) are subject to large variation in flow and load, not to speak of uncertainties on the composition of the incoming wastewater. On top of that, the activated sludge treatment process, as used by the vast majority of treatment plants, is difficult to control due to the complex behaviour of the biological process. Nevertheless WWTPs are run 24/7, with operators and management challenged to meet ever tightening environmental regulations. In order to meet the operational demands of...

    By AppliTek NV based in Nazareth, BELGIUM.

  • Filtration systems & solutions for wastewater treatment industry

    The removal of contaminants from untreated water has become a leading issue, due to environmental concerns and the threat of future water shortage. An effective purification process is necessary to eliminate organic, chemical or other debris to meet stringent regulations for drinking water, as well as for the chemical, industrial, pharmaceutical and science markets.

    By Porvair Filtration Group based in Fareham, UNITED KINGDOM.

  • Water compliance

    In most companies today, managers are overwhelmed with poorly organized, de-centralized data and are still making decisions by reacting to historical results driven by non-standardized processes and guessing about the future. Highly customized spreadsheets, manual extracts from hard to use ERP systems, “cut & paste” reporting…sound familiar?

    By Perillon Software Inc. based in Acton, MASSACHUSETTS (USA).

  • Premium

    Anaerobic water purification systems for pulp and paper

    Water is required in almost every step of the production process of pulp and paper. The wastewater streams vary greatly in concentration and composition (e.g. COD, BOD, suspended solids, wood extractives, sulphur, pH). Due to stricter rules and regulations with regard to fresh water intake and wastewater discharge, efficient water management has become essential to the industry.

    By Paques B.V. based in EL Balk, NETHERLANDS.

  • Premium

    Water filtration systems for heap leaching in the mining industry

    AZUD solutions to heap leaching in the mining industry. The more than 30 years of experience as manufacturers of emitters and filtration systems have permitted the adaptation of our products to the requirements of the mining sector. We have developed lixiviation projects of materials such as gold, silver, copper, nickel or zinc in Europe and South America. AZUD technology gives value-added in the lixiviation processes, maximizing the extraction of the pile.

    By Sistema Azud, S.A. based in Alcantarilla, SPAIN.

  • Water treatment systems for chemical industry

    The effluents that accrue in the cleaning process of silo vehicles and containers for transportation of raw materials for the chemical industry, are highly complex and constantly changing in the composition of wastewater. Flocculation as the prior art of treatment for chemical waste water can not remove many of the completely dissolved invisible substances. Thus, the residual stresses are evident despite high claritv of the `Treated effluent` is often well above the levels witch are applicable for wastewater in...

    By Weidner Ireland Ltd based in IRELAND.

  • Drinking Water

    Ensuring safe drinking water is a complicated and resource intensive process involving stringent state and federal requirements. Failures in the system are not only costly but can pose serious threats to public health. Pumping tests provide needed data to ensure proper flow and aquifer levels. With DriveConnect technology in place it is possible to significantly minimize expensive lift station drawdown testing. Drive‑Chat enabled solutions can reduce costs with automated alerts and remote anywhere anytime...

    By DriveConnect based in Brandon, FLORIDA (USA).

  • Premium

    Aeration and mixing technologies for activated sludge systems

    The activated sludge process uses a mass of organisms to aerobically treat wastewater and is used to remove biodegradable organics from both municipal and industrial wastewaters.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Electrical Based Tomography Systems for Batch mixing

    Batch mixing generally refers to mixing processes in vessels and ITS tomography instrumentation provides a tool to understand, optimise and control mixing. Tomography sensors take data from between 200 to 2,400 measurement points in a single snapshot, thus providing a sound basis to monitor changes in concentration of different materials and so quantify mixing. Sensors can be retrofitted through using probe based instruments, scanning the z-axis (which usually presents the key challenge to effective mixing)....

    By Industrial Tomography Systems (ITS) based in Manchester, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you