Only show results in Virginia? Ok

process water test Applications

  • Microbial testing for industrial process water sector

    Real-time Information for Same Shift Problem Solving! Don`t take chances on microbiological contamination! Through fast, portable, and accurate testing, LuminUltra`s QuenchGone21 Industrial (QG21I™) test kit instantly measures the total microbiological content in industrial process waters to detect emerging growth and locate the source of contamination. This takes the guess-work out of managing process water systems and aids with disinfection and cleaning cycles. LuminUltra`s QG21I test is the ideal tool to help...

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Premium

    Deionized Water Testing

    Years ago, high purity water was used only in limited applications. Today, deionized (Dl) water has become an essential ingredient in hundreds of applications including: medical, laboratory, pharmaceutical, cosmetics, electronics manufacturing, food processing, plating, countless industrial processes, and even the final rinse at the local car wash.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Water-Wastewater Measurements / NO analyzers for measurement of nitrification processes

    NO analyzers for measurement of nitrification processes applied for treating high concentration nitrogen wastewaters by microbial nitric oxide production. Also, the conversion of N-nitrosomines to nitric oxide for the quantification of those compounds in wastewater impacted waters. View Water-Wastewater Measurement Products

    By Eco Physics Inc. based in Ann Arbor, MICHIGAN (USA).

  • Premium

    Reverse Osmosis Water Testing

    Osmosis is the phenomenon of lower dissolved solids in water passing through a semi-permeable membrane into higher dissolved solids water until a near equilibrium is reached. Reverse Osmosis (RO) is a membrane process of purification which removes most of the the total dissolved solids (TDS) in water by reversing the natural process of osmosis. Pressure is applied to a TDS-concentrated solution against a semi-permeable membrane, causing pure water to diffuse through the membrane. RO has become an important...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Water Testing for Textile Manufacturing

    The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Monitoring of phenol in water

    A plant located in the eastern United States manufactures phenolic resin for applications in plastics molding. This plant uses well water for cooling its reaction process and then discharges the water into a local creek.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Drinking water testing

    Water is essential for life. It is part of the environment, being used in industrial processes and available as tap water. To secure the safety of water that is daily available, the amount of necessary microbiology tests to comply with regulatory requirements are increasing and are heavily relying on quick and accurate answers to confirm the identities of a broad selection of important micro-organisms.

    By Bruker Corporation based in Billerica, MASSACHUSETTS (USA).

  • Premium

    Monitoring Once Through Cooling Water

    Fluorescence-based oil in water monitors from Turner Designs Hydrocarbon Instruments have been used extensively in industrial water processes for more than 20 years. These low maintenance fluorescence monitors have no significant measurement disturbance from water turbidity or naturally occurring organics in the water. Oil in water monitors can help detect and prevent major oil spills that may cause significant environmental damage and regulatory compliance infractions.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Drinking water solutions for the TOC removal efficiency

    Problem: Organic matter (UV254/TOC) in drinking water can react with chlorine to form harmful disinfection by-products (DBPs). Some removal of TOC is achieved through the conventional drinking water treatment processes, while carbon absorption may be used to further enhance the removal of TOC prior to chlorine disinfection.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Premium

    Waste water treatment plants Air quality control by TRS MEDOR

    Context & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. At the entrance of the waste water plants, where the waste water arrives, strongly...

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Industrial solutions for ultrapure water monitoring

    Problem: Trace contamination in ultrapure water (UPW) can have detrimental effects on a manufacturing process in Semiconductor, Power Generation and Pharmaceutical industries. Onsite treatment is conducted to further remove trace impurities from source water.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Water measurement systems & sensors for water quality monitoring

    Effective water quality monitoring is the key to environmental protection of watercourses and for reliable process control and wastewater treatment.  Discharge consents under EPR regulations dictate that water quality monitoring is undertaken to ensure that consented parameters are below the consented concentrations.  Traditionally this has been done using water quality sampling methods but increasingly automatic water quality measurement sensors linked to real-time telemetry is seen as the most...

    By Isodaq Technology - Hydro-Logic Group based in Bromyard, UNITED KINGDOM.

  • Smart & Efficient Waste Collection

    SenZ2 provides a complete solution to optimise the waste collection process. Highly accurate insights are given on container fill-levels with the unique LEVELRADAR™. This reliable source of information, together with the route optimisation application will result in direct operational cost savings. Beside, complaints about full containers can be avoided effectively. Through a significant reduction in emissions, road wear, vehicle wear, noise pollution and work hours, SenZ2 provides cities as well as...

    By SenZ2 BV based in NETHERLANDS.

  • Premium

    Test Kits and Photometric Methods for agriculture, in food or water analysis

    When analyzing water and food, trust plays a very important role. Only careful analysis using tests that are performed correctly and are delivering sound results will help to maintain and improve our quality of life. With ready-to-use tests and test systems from Merck Millipore, you can trust your results. Our broad product range covers everything from water analysis to the control of production process up to the measurement of special food parameters.

    By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY.

  • Monitoring Oil and Grease in Wastewater

    Real time information speeds processing and saves time in the treatment of water and wastewater. Get a measurement in a few minutes extracting oil from water using S-316 extraction solvent and measuring the oil content using a Model OCMA-550 NDIR analyze

    By HORIBA Europe GmbH based in Leichlingen, GERMANY.

  • Waste water respirometry solutions for toxicity reduction tests

    In industrial manufacturing companies, before a new process comes on-line, it is important to measure the toxicity of the effluent stream. This is especially the case for companies who treat their own waste. From the toxicity value (EC50) obtained, it may be a cost-effective solution to simply discharge the effluent to the treatment works at a slow and defined rate to minimise damage to the activated sludge. Following a period of acclimatisation it is often possible to increase feed rates to the plant and this...

    By Strathkelvin Instruments Ltd. based in North Lanarkshire, UNITED KINGDOM.

  • Laser detection solutions for water-quality monitoring

    The technology of Spectral Fluorescence Signatures (SFS) is a very sensitive and selective tool to monitor many industrial processes on site and in real-time. The SFS analyzer series – SFS-Scanner and Instant Screener spectrofluorometers - are capable of detecting target substances even in complex mixtures without any pre-treatment of the samples.

    By Laser Diagnostic Instruments AS based in Tallinn, ESTONIA.

  • Microbial testing for biological wastewater treatment industry

    Realize a new level of process stability and efficiency! Wastewater operators have traditionally had no choice but to rely on TSS or VSS measurements to quantify biomass in their process. These measurements detect much more than just living biomass and therefore are inaccurate and unresponsive indicators of the living population.

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Real-time In-situ Effluent Monitoring

    The UviLux BOD Indicator enables in-situ, real-time, reporting of BOD within both natural water systems and water processing plants. The monitor detects fluorescent proteins that are inherent within sewage and slurry and provides an output in BOD equivalent units. The principle behind the measurement is the excitation of Tryptophan-like fluorescence within UV wavelength band, which has been shown to correlate with both BOD and bacterial contamination. With complete flexibility of deployment methodology, the...

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • Water Data Management Solution for Meteorology Sector

    The management of hydro-meteorological data demands the highest process standards. Both recorded and derived data from various observation areas are archived together, edited in graphical and tabular form, analyzed, evaluated and presented. In order that these tasks are carried out efficiently and economically, the support of a specialized software solution is required. Our water data management solutions offer a comprehensive spectrum of functions for integrated collection, processing, quality control, evaluation...

    By KISTERS AG based in Aachen, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you