Only show results in Virginia? Ok

produced water Applications

  • Solution for the produce cooling and icing

    Fresh vegetables and fruits products require ice and/or chilled ice for preservation of quality. Ice and /or chilled water are used at all points in the chain of produce processing – ice is added during harvest process to start removal of the field heat from the product, top icing during processing, and liquid ice injection of boxes prior to shipment to the market, or central processing areas, or the end user. Processing requires continuous temperature control to maintain the best quality and extend the shelf life of the product. The use of ice reduces bacteria or enzyme activity in seafood products, slows decay, and yields a higher quality grade. Ice provides a sanitary means for this preservation.

    By Vogt Ice LLC based in Louisville, KENTUCKY (USA).

  • Aquatech Oil Sands-Produced Water Treatment

    For most oil sand recovery is accomplished with in-situ thermal processes like Steam Assisted Gravity Drainage (SAGD) and Cyclic Steam Stimulation (CSS), where steam and chemicals are injected to the liquefy the bitumen. The treatment and recycling of the produced water used in this process has a direct impact on the cost of oil production. Aquatech provides water treatment technologies that includes the recycling of the produced water used the process which has a direct impact on their the cost of oil production.

    By Aquatech International Corporation based in Canonsburg, PENNSYLVANIA (USA).

  • Premium

    Oil in Water Analysis for Flowback or Produced Water

    The amount of water used in and produced by hydraulic fracturing of shale gas wells is in the millions of gallons per well. Whether the water is going to be taken off site for disposal or reused for re-injection, the flowback or produced water needs pretreatment to remove any residual oil from the water. Waiting for remote lab results can take several days to a week. InfraCal TOG/TPH Analyzers allow for oil in water testing at the well site in less than 10 minutes. The sampling requires a few simple steps that can be performed by non-technical personnel. The water is mixed with the extraction solvent, shaken, and then presented to the analyze for measurement. The same InfraCal TOG/TPH Analyzer can be used for TPH in soil if a spill or pond leak occurs to determine the contaminated area. The analyzer features: -Results in under 15 minutes -Detect levels as low as 10 ppm -Portable, rugged, lightweight, easy-to-use -Battery operable -Ideal for field or lab use

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Produced Water Analysis

    Sitelab's UVF-3100D is used to test crude oil in water collected from produced water treatment sites in Wyoming. Water was tested for it's GRO and DRO content.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Produced water management for the oil and gas industry

    A combination of factors in recent years has led to increased attention to water management in the oil and gas industry. Some of these factors include: limited water resources in certain areas, development of water-intensive technologies to better exploit unconventional plays, excessive transportation/disposal costs for water, a changing regulatory environment and a public push for sustainability and conservation relating to water as a resource.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • Produced water treatment for oil and gas industry

    Recycling, reusing or treating produced water does not always have to be expensive.  Most Oil & Gas companies manage more water than they do hydrocarbons.  While MIOX is not a 100% solution to all produced water treatment needs, it does do the heavy lifting.

    By MIOX Corporation - Johnson Matthey`s Water Technologies based in Albuquerque, NEW MEXICO (USA).

  • Oil Water Separator for Hydrocarbon Recovery from Flowback, Produced Brinewater

    Hudson Oil Water Separators can be used to reclaim more oil and hydrocarbons from flowback, produced water, brine water or waste water before sending this value stream to disposal/injection sites. To enhance recovery even further package a Hudson Separator with a Wilsa ElectroWaveTM Conditioner for ultimate results. Up to 99.999% of oil and hydrocarbons recovered, including emulsified oils. Please call us today to evaluate your recovery potential.

    By Hudson Industries based in Warren, OHIO (USA).

  • Enhanced Oil Recovery - Produced/ Impaired/ Wastewater

    WILSA® technology improves the efficiency of existing separation equipment in produced/ impaired water. The non-chemical ElectoWave Conditioning system supercharges Stokes Law to break emulsions, enhance coalescing, reduce viscosity and retention time. This allows traditional/ existing separators to function more efficiently and to either reduce or eliminated chemical programs used to achieve separation.

    By Hudson Industries based in Warren, OHIO (USA).

  • Premium

    Solutions for water treatment and water disinfection

    We produce everything in house: all our products, systems and services. As well as being convenient, this is also smart. Disinfection solutions tailored to your needs offer excellent effectiveness.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY.

  • Premium

    Drinking water treatment

    Drinking water can be produced from any natural sources like groundwater, lakes and rivers (surface waters) or seawater. Drinking water standards are set by the World Health organisation or by the European Union. Drinking water must be free of suspended solids, microorganisms and toxic chemicals. Mineral concentration recommendation vary from country to country but most of the minerals have a maximum concentration recommended to ensure safe, equilibrated and pleasant water to drink.

    By Lenntech Water Treatment based in Delft, NETHERLANDS.

  • Industrial water demineralisation

    Deionized water, also known as demineralised water, is water that has had its mineral ions removed, such as cations like sodium, potassium, calcium, magnesium, iron, and anions such as chloride, nitrate, sulfate, bicarbonate and even silica. Deionization is a chemical process that uses specially manufactured ion exchange resins which exchange hydrogen ion and hydroxide ion for dissolved minerals, which then recombine to form water. Because the majority of water impurities are dissolved salts, deionization produces a high purity water that is generally similar to distilled water, and this process is quick and without scale buildup.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Ozone Water Treatment for Municipal Water Treatment

    Maintenance free and easy to operate ozone generators supplied by ozone generator manufacturer who knows ozone. Primozone is a modern ozone generator supplier who not only supplies ozone generators but also designs complete ozone water treatment systems. We know ozone and can be your partner in designing a complete and efficiently working ozone generator system for most municipal water treatment issues. The Primozone® technology allows for solutions that are cost effective. Our ozone generators produce a high concentration of ozone using a comparing low amount of energy, which makes the life cycle cost surprisingly low.

    By Primozone Production AB based in Löddeköpinge, SWEDEN.

  • Premium

    Advanced water treatment equipments for deionization

    Deionized water, also known as demineralized water (DI water or de-ionized water; can also be spelled deionised water), is water that has had its mineral ions removed, such as cations from sodium, calcium, iron, copper and anions such as chloride and bromide. Deionization is a physical process which uses specially-manufactured ion exchange resins which bind to and filter out the mineral salts from water. Because the majority of water impurities are dissolved salts, deionization produces a high purity water that is generally similar to distilled water, and this process is quick and without scale buildup. However, deionization does not significantly remove uncharged organic molecules, viruses or bacteria, except by incidental trapping in the resin. Specially made strong base anion resins can remove Gram-negative bacteria. Deionization can be done continuously and inexpensively using electrodeionization.

    By Advanced Equipment and Services, Inc. (AESINC) based in Coconut Creek, FLORIDA (USA).

  • Premium

    algae control in drinking water plants

    By controlling algae, cyanobacteria and fouling LG Sonic can efficiently reduce taste and odor problems in a treatment plant. The performance of a drinking water treatment plant is consistent with the amount ol contamination in the water. Growth of algae and other fouling in and before a treatment plant can cause various problems within the process. In general, these issues are related with taste or odor of the water. Growth of algae, cyanobacteria and bacteria within the basins of the plant itself, increase the demand of chemicals or filtration and in turn creating problems with THM (trihalomethane) formation. Other common issues are growth of toxin and geosmin producing cyanobacteria (blue-green algae) within the intake reservoir or dam. These molecules give the water an unpleasant `earthy ` taste.

    By LG Sonic based in Zoetermeer, NETHERLANDS.

  • Premium

    Water Treatment Solutions for Hydrogen Sulfide

    Sulfates and hydrogen sulfide are both common nuisance contaminants. Although neither is usually a significant health hazard, sulfates can have a temporary laxative effect on humans and young livestock. Sulfates also may clog plumbing and stain clothing. Hydrogen sulfide produces an offensive `rotten egg` odor and taste in the water, especially when the water is heated.

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

  • Industrial water Nickel & Cobalt purification

    Cobalt is a brittle, hard transition metal with magnetic properties similar to iron. It is mainly used as an alloy with iron, nickel or other metals to produce corrosion and wear resistant products for high temperature applications (such as jet engines, gas turbines, etc.). Cobalt is normally produced as a by-product of nickel or copper mining. The purity requirements for Cobalt do not allow nickel to exceed a concentration 0.1%. Earlier, the nickel was removed by lime precipitations, but as the market specifications became more stringent, ion exchange technologies have been applied.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • water treatment solutions for the dechloramination

    Chlorine reacts with compounds in the swimming pool water to give rise to by-products. Although there is potentially a large number of chlorine-derived disinfection by-products (DBPs), the substances produced in the greatest quantities are chloramines. Chlorine reacts extremely rapidly with ammonia in the water to form chloramines (monochloramine, dichloramine and trichloramine).

    By bestUV BV based in Best, NETHERLANDS.

  • Premium

    Water treatment

    Water treatment mainly involves industrial wastewater,seawater desalination and municipal wastewater treatment.Recently, more and more wastewater has been produced and water resources are more and more scarce,so some treatment prior to discharge is becoming more and more necessary.

    By Horizon Water Co., Ltd. based in Chaoyang District, CHINA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you