Only show results in Virginia? Ok

produced water filtration Applications

  • Water filtration with UV purification for at home

    Liquid purity from point of use water systems. The water we and our children drink should be the most perfect on the planet. Liquid purity. Waterlogic POU (point of use) water dispensers give your family the freshest, healthiest, best-tasting water possible. And total peace of mind. Our innovative technology in point of use water cooler systems is now available in the home, with a range of sleek and stylish products offering the option of instant chilled, room temperature or sparkling water. Sitting next to the coffee maker, plumbed into the mains, our machines produce glass after glass of wonderful water. Sound good? It gets better. Banishing bottles saves money and reduces your carbon footprint, too. Start using a Waterlogic point of use water system in your home and office to make your contribution to natural resource conservation.

    By Waterlogic International Ltd based in Basingstoke, UNITED KINGDOM.

  • Industrial and commercial water filtration for reverse osmosis plants

    Reverse Osmosis or RO is a system used to produce an ultra-high quality of water with use of membrane. Reverse Osmosis plants are required in many production processes.  Damage to these high quality membranes can easily be caused if no pre-filtration is in place to protect the system from high loading, this can result in extremely high costs of repairs, ranging from tens of thousands to millions, not to mention the loss of production to a company if as a result of plant failure production has to be stopped until the system is repaired.

    By Hydro-Gen Engineering Ltd based in Widnes, UNITED KINGDOM.

  • Industrial water Nickel & Cobalt purification

    Cobalt is a brittle, hard transition metal with magnetic properties similar to iron. It is mainly used as an alloy with iron, nickel or other metals to produce corrosion and wear resistant products for high temperature applications (such as jet engines, gas turbines, etc.). Cobalt is normally produced as a by-product of nickel or copper mining. The purity requirements for Cobalt do not allow nickel to exceed a concentration 0.1%. Earlier, the nickel was removed by lime precipitations, but as the market specifications became more stringent, ion exchange technologies have been applied.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Process Belt Meshes For Pressing with Stage Presses

    Single-stage press / multi-stage press; Presses with FLEXOPLAN – For exacting use in stationary single-stage presses and multi-stage presses, GKD produces FLEXOPLAN meshes in customized versions.

    By GKD - Gebr. Kufferath AG based in Düren, GERMANY.

  • Filtration systems & solutions for energy sector

    Porvair Filtration Group have supplied a comprehensive range of filtration and separation products to the energy market for many years. We supply all major sectors of the power generation, distribution and supply industry, and our technology is used over a wide range of applications. These include, but are not limited to, the distribution of natural gas, conditioning and treatment of fuel oils, hydrocarbons and produced water, clean coal technologies, gasification and fuel cell technology. Our unrivalled experience and extensive product range ensures we can supply a fully engineered tailored solution for every application.

    By Porvair Filtration Group based in Fareham, UNITED KINGDOM.

  • Membrane filtration systems for reduction of BOD/COD

    Reverse Osmosis Polishers can concentrate BOD/COD from evaporator condensate and RO permeate streams to reduce waste water. Polished water can also be re-used in plant for boiler water make-up and CIP systems. In Dairy Industry applications, `polishing` of these process water streams aids in the production of Class I water for re-use from dairy products as defined and regulated under Food & Drug Administration rules. Water produced with this technique is also very soft, generally resulting in lower cleaning chemical consumption.

    By GEA Filtration based in Hudson, WISCONSIN (USA).

  • Filtration plants for solid-liquid separation and dewatering of treated effluents for chemical/pharmaceutical industry

    Bilfinger Water Technologies produces and installs filtration plants in chemical – pharmaceutical fields since the early 1970s. The filtration systems developed by Bilfinger Water Technologies during this 30 year-experience are particularly appreciated in solid liquid separation processes and dewatering of treating effluents. These separation processes play a very important role in the chemical pharmaceutical field, being essential elements of many production processes.

    By Bilfinger Water Technologies GmbH based in Aarbergen, GERMANY.

  • Premium

    algae control in drinking water plants

    By controlling algae, cyanobacteria and fouling LG Sonic can efficiently reduce taste and odor problems in a treatment plant. The performance of a drinking water treatment plant is consistent with the amount ol contamination in the water. Growth of algae and other fouling in and before a treatment plant can cause various problems within the process. In general, these issues are related with taste or odor of the water. Growth of algae, cyanobacteria and bacteria within the basins of the plant itself, increase the demand of chemicals or filtration and in turn creating problems with THM (trihalomethane) formation. Other common issues are growth of toxin and geosmin producing cyanobacteria (blue-green algae) within the intake reservoir or dam. These molecules give the water an unpleasant `earthy ` taste.

    By LG Sonic based in Zoetermeer, NETHERLANDS.

  • Premium

    Environmental dewatering solutions for industrial wastewater processing

    TenCate Geotube technology provides cost-effective and sure dewatering and containment in a wide variety of industries.  In Power and Utility, Pulp and Paper and other general industries that produce sludge, TenCate Geotube dewatering technology enables the recovery of valuable materials, provides structural stability, improves water quality, or just reduces storage footprint by sometimes 50 to 80%.  The dewatering containers can be custom-sized to the application, placed in available space between other structures, and removed once dewatering is complete. In some cases, conditioners or polymers are used to promote flocculation to increase dewatering rate, improve solids retention and filtrate quality.

    By TenCate Geosynthetics Netherlands bv based in AE in Nijverdal, NETHERLANDS.

  • Atmospheric Water Generators

    WaterMicronWorld, Ltd. is engaged in the research and development, manufacturing, marketing, and worldwide distribution of atmospheric water generators, filtration, ionization, and purification devices and chemicals. The Company’s various products include Atmospheric Water Generators, the WaterMicronWorld™ (AWG-30H/O Home or Office machine) and an extensive line of C-Series industrial grade Atmospheric Water Generators capable of producing 200,250, 500, 1000, 3000, and up to 5000 liters per day of pure fresh drinking water. For more information on WaterMicronWorld, Ltd., please visit our website at: www.watermicronworld.com WaterMicronWorld, Ltd utilizes a revolutionary AWG (Atmospheric Water Generation) technology to produce safe and drinkable water. AWG refers to the technology of extracting and producing purified drinking water from the humidity present in the air. To produce pure water, it requires no plumbing or any type of external water source.

  • Welding Fume Extraction

    Welding fumes & gases are Unbreathable. Nonetheless, welding is perhaps the most common industrial process and necessary anytime the joining of metals is required. Regardless of the welding equipment type or technology, the simple process of melting metal and filler materials creates poisonous fumes and gases. ? Different types of welding processes present unique challenges to adequately handle airborne fumes. Robotic welding equipment and other automated welding systems produce a high volume of welding fumes and sparks and need to captured by a heavy duty robotic welding hood. Moreover, manual stick welding typically produces a high volume of smoke and often requires a self-cleaning fume extractor to avoid overwhelming the filters.? Lighter duty applications like MIG welding generally produce less particulate and light-duty TIG welding generates the least amount of smoke. It is important to not only consider the type of welding process but also the work piece material in order to select the correct filtration media for your application. HEPA filters are recommended for stainless steel welding, Nanofiber filters for Aluminum and parts containing higher levels of Manganese. Polyester filters are appropriate where rust inhibitor, lubricants and coatings create an oily smoke as these filters can be washed in water. Diversitech offers a complete line of fume collection machines from compact welding fume extractors to central welding fume filtration systems. We specialize in engineered solutions and our engineering team is experienced in selecting the best equipment and filter media for your particular application. We can present you with detailed technical drawings demonstrating several potential layouts and solutions including costing, installation and start-up expenses. ??

    By DiversiTech based in Montreal, QUEBEC (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you