Only show results available in Virginia? Ok

produced water monitoring Applications

  • Premium

    Produced Water Analysis

    Sitelab's UVF-3100D is used to test crude oil in water collected from produced water treatment sites in Wyoming. Water was tested for it's GRO and DRO content.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Premium

    Oil in Water Analysis for Flowback or Produced Water

    The amount of water used in and produced by hydraulic fracturing of shale gas wells is in the millions of gallons per well. Whether the water is going to be taken off site for disposal or reused for re-injection, the flowback or produced water needs pretreatment to remove any residual oil from the water. Waiting for remote lab results can take several days to a week. InfraCal TOG/TPH Analyzers allow for oil in water testing at the well site in less than 10 minutes. The sampling requires a few simple steps that can be performed by non-technical personnel. The water is mixed with the extraction solvent, shaken, and then presented to the analyze for measurement. The same InfraCal TOG/TPH Analyzer can be used for TPH in soil if a spill or pond leak occurs to determine the contaminated area. The analyzer features: -Results in under 15 minutes -Detect levels as low as 10 ppm -Portable, rugged, lightweight, easy-to-use -Battery operable -Ideal for field or lab use

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Sub-ppm Oil in Water Testing

    InfraCal 2 is the newest addition to the worldwide-recognized Wilks InfraCal line of portable, filter-based infrared analyzers. It provides sub-ppm measurement capability, password protected calibrations and instrument settings, data storage and multiple calibrations, and a touch screen display for more user options. Ideal for measuring oil content levels in FRAC and produced water, fats, oil and grease (FOG) in wastewater, industrial and refinery wastewater effluents, cleaning of metal parats, drill cuttings, containment ponds and remediation sites.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Water quality monitoring for semiconductor industry

    Water is fundamental to the manufacturing process in a semiconductor facility. Electronic components are rinsed or washed several times during the producing process with ultrapure water (UPW) to remove residue. Continuous monitoring of organic constituents (TOC) on the influent city water assist with UPW production. Good quality waste streams for the manufacturing process can also be monitored for reuse potential.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Premium

    Water quality monitoring for chemical industry

    Chemical plants that produce high quantities of phenols (plastics, pesticides and pharmaceutical industries) and other aromatic organic compounds are excellent candidates for wastewater characterization via spectral analysis. Chemicals that contain conjugated double bonds absorb UV radiation remarkably well. The benefits include higher precision in process control as well as optimization of wastewater treatment.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Premium

    Reduce biofilm formation

    In many industrial or professional applications where water is being stored, biofilm may grow. The growth of biofilm can damage the installations and reduce efficiency of the circuit. A biofilm can grow certain substrates which can be found in water. When temperatures are high, for example in cooling towers, a matrix of different micro- organisms such as bacteria, fungi, algae can grow very rapidly causing the formation of a biofilm on certain surfaces submerge in water. During the formation of this biofilm, certain micro organisms starts producing extra cellular polymeric substances (EPS) which reinforce the biofilm structure.

    By LG Sonic based in Zoetermeer, NETHERLANDS.

  • Premium

    TPH in Soil Remediation

    InfraCal TOG/TPH Analyzers allow for TPH (Total Petroleum Hydrocarbons) in soil testing at remediation sites such as leaking underground storage tanks and produced water evaporation ponds. Site managers can avoid having costly soil remediation equipment sit idle while waiting for off-site lab results. Sampling requires a few simple steps that can be performed by non-technical personnel. The soil is mixed with the extraction solvent, shaken, filtered, and then presented to the InfraCal Analyzer for measurement. Features include: - Results in under 15 minutes, including extraction ¨ Detect levels as low as 10 ppm ¨ Portable, rugged, lightweight, easy-to-use ¨ Battery operable ¨ Ideal for field or laboratory applications ¨ Factory calibration available

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Monitoring Sewage Flow

    Monitoring Sewage Flow is a critical tool for local governments, for water and waste-water utilities and for industrial plants. Sewage monitoring can prevent environmental disasters such as sewage overflow within populated neighborhoods or excessive waste flow into local lakes, rivers or sea. Sewage monitoring is also an important tool for short term and long term planning of the sewers infrastructure. Short term refers to just-in-time and cost effective maintenance. For example, sending the technical team to the correct manhole at the correct time to clean and eliminate obstructions. Long term planning refers to designing the correct pipe diameters and correct slopes to contain sewage from new new buildings and plants. Sewage monitoring is a tool for billing plants who produce sewage above their water intake and a tool for plants which utilize water to request lower utility bills. Solid Applied Technologies provides a complete and tested solution for Sewer Monitoring.

    By Solid Applied Technologies Ltd. (SolidAT) based in Ashkelon, ISRAEL.

  • Premium

    Pure drinking water solutions for laboratories

    For 40 years our water distillers have been used in laboratories throughout the world to produce high-purity distilled water. Not only are our stainless steel systems durable and reliable, but they waste much less water and are less expensive than the other brand of popular laboratory water distillers. Whether your facility is a medical, dental or research laboratory, our water distillers can be configured to meet any grade of water that you need. Simply tell us what grade of water you need to achieve and we will configure the best system to meet your specific needs.

    By Pure & Secure, LLC. based in Lincoln, NEBRASKA (USA).

  • Air Quality Monitoring Equipment for Combustion Industry

    Boilers and Combustion Research A fuel source burning with oxygen to produce carbon monoxide, carbon dioxide and water is an equation from school science lessons but looking into the fuel temperature and oxides of nitrogen produced along with the CO, CO2 and O2 is work that is being carried out by boiler makers, power generators and all sorts of industrial applications every day.

    By Signal Group Ltd based in Camberley, UNITED KINGDOM.

  • Water quality testing for drinking water services in remote areas

    In 1985, the University of Surrey in collaboration with Oxfam developed the Oxfam DelAgua Portable Water Quality Monitoring Test Kit. The Oxfam DelAgua kit enables field workers to test water quality in remote and isolated situations and in circumstances where there is no access to a water testing laboratory. Since its development in 1985, the water test kit has been used by all the major International NGO-s and other aid agencies in over 130 countries around the world.

    In 2006, The University of Surrey and other investors founded DelAgua Water Testing Limited to take over the management of the DelAgua organisation. Since then, various improvements have been made, including:

    • The upgrading of all kits
    • The upgrade of the design, manufacturing and distribution functions
    • R&D to produce a portable microbiological testing kit that provides quantitative results in less than 20 minutes.
    • The upgrade of existing services and the introduction of new services, including:
      • Free access to a water quality risk assessment software program on DWT`s website
      • Free access to a library of reference documents on DWT`s website

    In addition to distributing its own kits and consumables, DWT also offers a distribution service for other manufacturers` products. The most popular products are detailed on this website, but those not detailed can also be supplied - DWT is able to source in excess of 60,000 products from numerous manufacturers.

    DWT is committed to providing services and products to enable the provision of clean drinking water for everyone around the world.

    By DelAgua Group based in Marlborough, UNITED KINGDOM.

  • Premium

    Measuring Fats, Oil and Grease (FOG) in Wastewater

    It is estimated that 23-28% of Sanitary Sewer Overflows (SSOs) are due to Fats, Oil and Grease (FOG). With significant growth in the commercial food sector on top of other high FOG producing industries such as metal processors, meat packers, cosmetic manufacturers and industrial laundry establishments, the need for publicly owned treatment plants (POTWs) and industries to regulate and monitor FOG is crucial to public health. Besides clogged sewer lines, high FOG levels also disrupt the effective operation of a wastewater treatment plant. An important feature of any FOG program is locating and monitoring high oil and grease producing industries and food service establishments. InfraCal TOG/TPH Analyzers provide a simplified procedure for FOG analysis based on solvent extraction and infrared absorption which can give the regulator or operator an on-site result in less than 10 minutes.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Smoke generator device for large scale external exercises and tunnel testing

    Making smoke in a very open environment or external environment can be a challenging! An oil-based smoke generator, such as a ViCount system, can produce dramatically more artificial smoke than multiple water based systems. This is due to the fact that the smoke ViCounts produce, being oil-based, does not evaporate in the same way and speed that water-based smoke does. The smoke from a ViCount smoke generator will travel for 1000`s of meters, compared to a typical water based smoke machine that may produce a smoke visible for 100 meters. Just one ViCount or Vulcan can replace 10 or more conventional water based smoke systems. ViCount`s have been used world wide for many tunnel smoke simulations, be it for RTA training / evacuation exercises or tunnel ventilation testing.

    By Concept Smoke Systems based in Maidenhead, UNITED KINGDOM.

  • Marine envrionmental solutions for marine aggregate sector

    Fugro EMU Limited has an extensive history of supporting clients in the marine aggregates sector, with over 20 years experience in this field. Building on the long established relationships with clients in the marine aggregates sector, Fugro EMU consultancy division can offer an integrated approach to consent management providing in-house project management of surveys and additional studies for all phases of development. Fugro EMU’s marine consultants offer technical expertise and solid understanding of EIA procedures, producing focused environmental statement`s and developing innovative impact assessment techniques applied through marine aggregates regional environmental assessments. Fugro EMU has a proven record in delivering consent success in the marine aggregate extraction industry and can manage all aspects of development from prospecting through to scoping, environmental statement production and project management of all monitoring and licensing.

    By Fugro EMU Limited based in Portsmouth, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you