Only show results in Virginia? Ok

produced water treatment Applications

  • Aquatech Oil Sands-Produced Water Treatment

    For most oil sand recovery is accomplished with in-situ thermal processes like Steam Assisted Gravity Drainage (SAGD) and Cyclic Steam Stimulation (CSS), where steam and chemicals are injected to the liquefy the bitumen. The treatment and recycling of the produced water used in this process has a direct impact on the cost of oil production. Aquatech provides water treatment technologies that includes the recycling of the produced water used the process which has a direct impact on their the cost of oil production.

    By Aquatech International Corporation based in Canonsburg, PENNSYLVANIA (USA).

  • Produced water treatment for oil and gas industry

    Recycling, reusing or treating produced water does not always have to be expensive.  Most Oil & Gas companies manage more water than they do hydrocarbons.  While MIOX is not a 100% solution to all produced water treatment needs, it does do the heavy lifting.

    By MIOX Corporation - Johnson Matthey`s Water Technologies based in Albuquerque, NEW MEXICO (USA).

  • Ozone Water Treatment for Municipal Water Treatment

    Maintenance free and easy to operate ozone generators supplied by ozone generator manufacturer who knows ozone. Primozone is a modern ozone generator supplier who not only supplies ozone generators but also designs complete ozone water treatment systems. We know ozone and can be your partner in designing a complete and efficiently working ozone generator system for most municipal water treatment issues. The Primozone® technology allows for solutions that are cost effective. Our ozone generators produce a high concentration of ozone using a comparing low amount of energy, which makes the life cycle cost surprisingly low.

    By Primozone Production AB based in Löddeköpinge, SWEDEN.

  • Produced Water Analysis

    Sitelab's UVF-3100D is used to test crude oil in water collected from produced water treatment sites in Wyoming. Water was tested for it's GRO and DRO content.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Premium

    Water treatment

    Water treatment mainly involves industrial wastewater,seawater desalination and municipal wastewater treatment.Recently, more and more wastewater has been produced and water resources are more and more scarce,so some treatment prior to discharge is becoming more and more necessary.

    By Horizon Water Co., Ltd. based in Chaoyang District, CHINA.

  • Premium

    Advanced water treatment equipments for deionization

    Deionized water, also known as demineralized water (DI water or de-ionized water; can also be spelled deionised water), is water that has had its mineral ions removed, such as cations from sodium, calcium, iron, copper and anions such as chloride and bromide. Deionization is a physical process which uses specially-manufactured ion exchange resins which bind to and filter out the mineral salts from water. Because the majority of water impurities are dissolved salts, deionization produces a high purity water that is generally similar to distilled water, and this process is quick and without scale buildup. However, deionization does not significantly remove uncharged organic molecules, viruses or bacteria, except by incidental trapping in the resin. Specially made strong base anion resins can remove Gram-negative bacteria. Deionization can be done continuously and inexpensively using electrodeionization.

    By Advanced Equipment and Services, Inc. (AESINC) based in Coconut Creek, FLORIDA (USA).

  • Premium

    Drinking water treatment

    Drinking water can be produced from any natural sources like groundwater, lakes and rivers (surface waters) or seawater. Drinking water standards are set by the World Health organisation or by the European Union. Drinking water must be free of suspended solids, microorganisms and toxic chemicals. Mineral concentration recommendation vary from country to country but most of the minerals have a maximum concentration recommended to ensure safe, equilibrated and pleasant water to drink.

    By Lenntech Water Treatment based in Delft, NETHERLANDS.

  • Premium

    Solutions for water treatment and water disinfection

    We produce everything in house: all our products, systems and services. As well as being convenient, this is also smart. Disinfection solutions tailored to your needs offer excellent effectiveness.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY.

  • Industrial water demineralisation

    Deionized water, also known as demineralised water, is water that has had its mineral ions removed, such as cations like sodium, potassium, calcium, magnesium, iron, and anions such as chloride, nitrate, sulfate, bicarbonate and even silica. Deionization is a chemical process that uses specially manufactured ion exchange resins which exchange hydrogen ion and hydroxide ion for dissolved minerals, which then recombine to form water. Because the majority of water impurities are dissolved salts, deionization produces a high purity water that is generally similar to distilled water, and this process is quick and without scale buildup.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • water treatment solutions for the dechloramination

    Chlorine reacts with compounds in the swimming pool water to give rise to by-products. Although there is potentially a large number of chlorine-derived disinfection by-products (DBPs), the substances produced in the greatest quantities are chloramines. Chlorine reacts extremely rapidly with ammonia in the water to form chloramines (monochloramine, dichloramine and trichloramine).

    By bestUV BV based in Best, NETHERLANDS.

  • Premium

    Wastewater treatment for Medium & Large STPs

    DEVISE has developed “Smart Treatment Solutions” for larger capacities plants. Medium size STP’s up to treatment capacity of 2,300 m3/d (11,500 P.E.) are possible to implement with Packaged Systems. DEVISE is currently implementing such a STP using its revolutionary “Ultra-Clear Bio-Plant” technique which would produce an effluent quality suitable for re-use.

    By DEVISE ENGINEERING S.A. based in Athens, GREECE.

  • Premium

    Process water treatment

    Process water covers the wide range of boiler feed water, cooling water for heat exchangers or engine, chemicals dilution, etc. It should typically have a conductivity ranging from 0,1 to 50 uS/cm, with little to no hardness to avoid scaling in heating system. Oxygen and carbon dioxide should be removed to prevent corrosion. Depending on your application, the water quality requirements can vary: Boiler feed water characteristic. Cooling water quality. Tap water or fresh groundwater are the most widely used source of water to produce process water.

    By Lenntech Water Treatment based in Delft, NETHERLANDS.

  • Water treatment for hospitals

    Horticultural and greenhouse operations are facing increasing challenges in dealing with sanitation issues related to water treatment. Over the course of growing a crop, pathogenic microorganisms accumulate and algae flourish on moist surfaces posing a constant threat to plants and produce. The main challenges lie the areas of irrigation water, elimination of biofilm and algae control. Existing biocidal products, while effective in killing algae, are not effective in removing biofilm from the water lines. The ultimate solution would be to employ a biocide that is capable to control algae on greenhouse surfaces and strip the biofilm in irrigation lines. Chlorine dioxide has demonstrated to possess both properties.

    By Applied Oxidation LLC based in Chattanooga, TENNESSEE (USA).

  • Premium

    Water treatment solutions for the industrial water supply industry

    Water is widely used in industry, whether it is encountered as raw water, process water or waste water. Very often this water must be treated before entering the process to ensure its quality and properties will meet the specifications demanded by the industrial process. In addition, with recent discharge regulations and policies towards zero liquid discharge, there is a high demand for solutions for recycling and reuse of waste water produced. Lenntech provides sustainable and complete solutions for water and waste water treatment for industrial water considering a wide range of technologies and strategies.

    By Lenntech Water Treatment based in Delft, NETHERLANDS.

  • Premium

    Water Treatment Solutions for Hydrogen Sulfide

    Sulfates and hydrogen sulfide are both common nuisance contaminants. Although neither is usually a significant health hazard, sulfates can have a temporary laxative effect on humans and young livestock. Sulfates also may clog plumbing and stain clothing. Hydrogen sulfide produces an offensive `rotten egg` odor and taste in the water, especially when the water is heated.

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

  • Odour and corrosion treatment solutions for wastewater treatment industry

    Odour emissions form a serious problem for many people that live near or work in places which produce odours. These places can be factories, wastewater treatment plants, farms like pig and poultry breeders, solid waste disposal facilities and landfills. As some odourous compounds can be harmful for the health of humans other are simply unpleasant and can cause health problems when exposed to on a continuous basis. In either case something needs to be done about it.

    By QM Environmental Services Ltd. based in The Hague, NETHERLANDS.

  • Premium

    Water treatment solutions for the mining & metallurgy industry

    Contaminated mine water is generated when rock containing sulphidic minerals is exposed to water and oxygen, resulting in the production of acidity and high concentrations of metals and sulphate in the water. Mine drainage, process water and storm water associated with industrial activities are the main types of water produced in mining operation. The two primary aims of the treatment of contaminated mine water are to neutralize acidity and removal metals. Lenntech provides sustainable complete water treatment solutions for mining industry considering a wide range of technologies and strategies.

    By Lenntech Water Treatment based in Delft, NETHERLANDS.

  • Water treatment solutions for the hospitality industry

    For Kinetico, that realization extends to the importance of specialized water treatment solutions customized for specific, wide-ranging applications. Our filters and softeners come in a variety of configurations designed to produce safe, clean drinking water and remove contaminants and hardness. This greatly improves overall water quality and protects expensive (and essential) boilers, laundry facilities and commercial kitchen appliances. To convert first-time guests into repeat customers and to safeguard your costly equipment, turn to Kinetico for the highest-quality water.

    By Kinetico - an Axel Johnson Company based in Køge, DENMARK.

  • Premium

    Measuring Fats, Oil and Grease (FOG) in Wastewater

    It is estimated that 23-28% of Sanitary Sewer Overflows (SSOs) are due to Fats, Oil and Grease (FOG). With significant growth in the commercial food sector on top of other high FOG producing industries such as metal processors, meat packers, cosmetic manufacturers and industrial laundry establishments, the need for publicly owned treatment plants (POTWs) and industries to regulate and monitor FOG is crucial to public health. Besides clogged sewer lines, high FOG levels also disrupt the effective operation of a wastewater treatment plant. An important feature of any FOG program is locating and monitoring high oil and grease producing industries and food service establishments. InfraCal TOG/TPH Analyzers provide a simplified procedure for FOG analysis based on solvent extraction and infrared absorption which can give the regulator or operator an on-site result in less than 10 minutes.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Environmental dewatering solutions for industrial wastewater processing

    TenCate Geotube technology provides cost-effective and sure dewatering and containment in a wide variety of industries.  In Power and Utility, Pulp and Paper and other general industries that produce sludge, TenCate Geotube dewatering technology enables the recovery of valuable materials, provides structural stability, improves water quality, or just reduces storage footprint by sometimes 50 to 80%.  The dewatering containers can be custom-sized to the application, placed in available space between other structures, and removed once dewatering is complete. In some cases, conditioners or polymers are used to promote flocculation to increase dewatering rate, improve solids retention and filtrate quality.

    By TenCate Geosynthetics Netherlands bv based in AE in Nijverdal, NETHERLANDS.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you