Only show results in Massachusetts? Ok

protective equipment Applications

  • dosimetry and radiation protection

    Dosimeters, survey meters, area monitors Lead aprons, gloves, googles lead barriers and lead bricks nuclear medicine equipment radiology equipment phantoms dose calibrators

    By Pacific-Tec Scientific Pte Ltd based in Singapore, SINGAPORE.

  • Pulsar noise testing equipment for entertainment noise industry

    As of April 2008 the entertainment industry is now expected to comply with ‘The Control of Noise at Work Regulations’. Owners and venue operators are now legally obliged to ensure their workforce is protected from excessive noise levels. To help you understand the key issues, Pulsar Instruments Plc have produced a Free Information Pack detailing the new regulations and offering simple advice and answers to the most commonly asked questions.

    By Pulsar Instruments plc based in Filey, UNITED KINGDOM.

  • Premium

    Water Monitoring Equipment for the Hydraulic Fracturing Industry

    Boost operational efficiency, prevent fracking water contamination and ensure regulatory compliance at your shale oil and gas site. In-Situ’s EPA-approved fracking water quality technologies help you achieve best practices at lower cost, protecting your company and water resources.

    By In-Situ, Inc. based in Fort Collins, COLORADO (USA).

  • Premium

    Heat Transfer Equipment for Waste Water Treatment Industry

    For years we are working successfully for environmental protection. Our systems allow to conserve resources through treatment and recovery. For the treatment of wastewater, among other thin film dryers. You can concentrate pastes and sludges, thicken, dry and dehydrate. The good product turnover in the dryer can dry sludge excellent. Process water must often be treated to either be disposed of properly or again recirculate in the process circuit. These combinations of methods are often necessary. In the process...

    By GIG Karasek GmbH based in Gloggnitz, AUSTRIA.

  • Air monitoring equipments for material emissions and product testing

    A wide variety of products that are used in our indoor environments may emit harmful substances, raising health and safety concerns in homes, offices, public places and vehicles. There is increasing demand to reduce VOC emissions from indoor sources, backed by European legislation. REACH regulation is a European initiative for the Registration, Evaluation, Authorisation and Restriction of Chemical Substances. It was implemented to protect human health and the environment from harmful emissions of chemicals into...

    By Gradko International Ltd based in Winchester, UNITED KINGDOM.

  • Premium

    Environmental solutions for the flue gas temperature control

    Evaporative gas cooling and conditioning systems help protect your downstream equipment, enhance air pollution control performance, reduce gas volumes, and increase production capacity. Central to our systems are Turbotak atomizing nozzles, which introduce a controlled amount of finely atomized water into the hot gas stream to reduce and/or maintain gas temperature. The water evaporates, while absorbing heat from the gases, for free-flowing dust, zero liquid discharge, and minimal or no wall buildup.

    By Dürr Megtec LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Environmental solutions for the iron and steel industry

    The evaporative gas cooling and conditioning system uses a finely atomized water spray to cool EAF, BOF off-gases from over 2,400°F (1,315°C) to as low as 240°F (115°C), protecting ductwork and downstream air pollution control equipment from high temperature and sparks, while providing rapid cooling for dioxin and furan control. By optimizing humidity levels, it helps electrostatic precipitators because the water spray completely evaporates while cooling the gases. There is no free water and no...

    By Dürr Megtec LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Municipal wastewater solutions for preliminary treatment industry

    Removing solids and grit plays a crucial role in protecting pumps and other equipment in a treatment facility. WesTech is your single source for headworks equipment to maximize your screening, washing, dewatering, grit removal and grit washing.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Gas monitoring instruments and systems for stack testing according to EPA test method 320

    The United States Environmental Protection Agency (EPA) has two stack testing methods for FTIR gas analyzers. Method 320 is an FTIR method for measuring wide range of organic and inorganic pollutants. Method 321 is a specific version for measuring hydrogen chloride HCl at cement kilns producing Portland cement. These methods define a quality assurance and control processes for verifying the accuracy of the results. The requirements for analytical equipment and software are defined on 40 CFR Part 60 Appendix B...

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Air filtration and gas purification solutions for industries

    Within the industrial sector there are specific installations which should pay maximum attention to the protection of their control rooms against corrosion. This is because their activities generate highly corrosive gasses which need to be eliminated in case they affect the functioning of critical electrical equipment. This corrosion compromises the efficiency and safety and can affect the production process itself.

    By Bioconservacion SA based in Barcelona, SPAIN.

  • Premium

    Radiation and chemical detection instrumentation for Public health and safety

    Public health and safety fall under the purview of Homeland Security but those entrusted with public health and safety are at the local level: Fire, police, emergency response, local EPA. What does the local Environmental Protection Agency (EPA) do to safeguard air, soil, and water for local communities? Monitoring and detection of radionuclides in addition to other toxic pollutants is employed. US Nuclear Corp provides specialized equipment to these various departments to monitor and detect any type of radionuclid...

    By US Nuclear Corporation based in Canoga Park, CALIFORNIA (USA).

  • Premium

    Radiation and chemical detection instrumentation for Medical industry

    Radioactive isotopes are used in nuclear medicine to image, diagnose, and treat. Likewise x-rays are used in both diagnosis and treatment. Both x-ray machines and radioisotopes are potentially hazardous to patients and medical workers and need careful monitoring. Radiopharmacies are increasing with new and innovative treatments utilizing isotopes. Hospital populations are among the most vulnerable to radiation leaks or outside intrusions. US Nuclear Corp provides equipment and instrumentation to protect these...

    By US Nuclear Corporation based in Canoga Park, CALIFORNIA (USA).

  • Premium

    Machine condition monitoring for metals processing

    Overview Metals processing industries employ large, critical assets, the reliability of which is absolutely essential to their business model. An undetected failure of a piece of processing equipment such as a rolling mill gearbox, or a 1000 ton extruder press not only involves the cost of equipment repair and line downtime, but the product quality may be severely impacted. Today more than ever, there is also less redundancy. Oil analysis is a critical aspect of a reliability based maintenance program, and for...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Oil Mist and VOC Collection

    Oil Mist is Unbreathable. Oil based cutting fluids are often used in CNC milling, machining and metalworking. During production, these processes can produce a mist that can threaten sensitive electronic circuitry and presents serious physical risks to employees (accidents from slipping, breathing hazards).? What are the risks in a workshop with oil mist? Exposure to oil mist for a prolonged period of time can cause a number of health issues. Dermatitis Eye, nose and throat irritation Damage to the respiratory...

    By Diversitech based in Montreal, QUEBEC (CANADA).

  • Rubber Lining Services

    The rubber lining services are performed on site or in the workshop and are designed respecting the specific given conditions of each project. By lining with rubber, we protect your equipments and industrial installations especially against chemical corrosion, but also on mechanical stress, extending very much their lifetime.

    By B-Team Corrosion Protection based in Bucharest, ROMANIA.

  • Foam covering of landfills

    Rusmar lowers your risks, protects your workers and improves your profit where it counts, at the landfill site. We do this by providing you the most comprehensive daily cover program, highly engineered and field proven application equipment and world class technical service.

    By Rusmar Inc. based in West Chester, PENNSYLVANIA (USA).

  • Magnets for the aggregate & quarrying industry

    The Master Magnets range of equipment protects crushers and other processing machinery from damaging tramp metals. Magnetic Separators are also used to remove any metal contamination from within the final product to ensure optimum cleanliness and maximum product value.

    By Master Magnets Ltd based in Redditch, UNITED KINGDOM.

  • Long term noise measurement for safety consulting

    Where unattended monitoring for longer periods is required to obtain more detailed information of the noise climate. Equipment is protected from the weather and powered for longer periods with options to remotely download data.

    By Casella based in Kempston, UNITED KINGDOM.

  • Coal storage for the mining industry

    CST Covers aluminum domes are custom designed around a bulk storage facilities specific clearance requirements, basin configuration and bulk handling equipment. Structurally efficient and lightweight, they maximize bulk storage capacity, minimize foundation costs and provide dependable protection form the elements while remaining virtually maintenance free.

    By CST Industries Inc based in Kansas City, MISSOURI (USA).

  • Mineral storage for the mining industry

    CST Covers aluminum domes are custom designed around a bulk storage facilities specific clearance requirements, basin configuration and bulk handling equipment. Structurally efficient and lightweight, they maximize bulk storage capacity, minimize foundation costs and provide dependable protection form the elements while remaining virtually maintenance free.

    By CST Industries Inc based in Kansas City, MISSOURI (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you