Only show results available in Virginia? Ok

pump control system Applications

  • Constant Pressure pump control valves

    For use with water well pumps and booster pumps, the Cycle Stop Valve (CSV) turns any pump into a variable flow, constant pressure system. Working in conjunction with a small pressure tank, the CSV is usually adjusted to the middle of the pressure switch range. IE; 40/60 PSI switch, 50 PSI CSV. The size of the pressure tank determines how much water can be used by the house, before the pressure drops to 40 PSI, and the pressure switch starts the pump. As long as flow rates in and around the house vary from 1 GPM to as much as the pump can produce, the CSV maintains a constant 50 PSI on the system. When there is no more flow required for the house, the CSV allows the little pressure tank to fill to 60 PSI, and the pump is shut off by the pressure switch.

    By Cycle Stop Valves, Inc. based in Lubbock, TEXAS (USA).

  • Force Main Systems Sulfide Odor Control with Hydrogen Peroxide

    Force main systems are typically high sulfide odor generators due to septicity conditions related to full pipe flow and a greater anaerobic slime layer (biofilm) thickness. Primary factors that influence sulfide loading generation in a force main include sewage temperature, BOD, retention time, pipe size and flow. Gaseous hydrogen sulfide (H2S) release at the force main discharge is usually the main concern related to odor and corrosion control needs; however, corrosion problems within the pipe can be of a concern (e.g. "crown cutting") at locations where air pockets can lead to concentrated H2S gas build up. Some basic considerations for assessing an appropriate sulfide odor treatment method for force main systems include: Retention time / duration of control Pump station type / cycling (e.g. vfd; start/stop, etc). Force main injection tap points, if any (e.g. air relief valves) Existence of intermediate re-lift stations or in series pump stations Manifold force main systems

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Water treatment system for rain water and storm water

    Through our SkyHarvester Water Conservation Systems division, Watertronics offers a single-source solution for commercial, industrial and municipal water harvesting systems at new or existing sites. Our design and engineering group will work hand-in-hand with your architect or engineer to provide integrated custom solutions to harvest, store, treat, pump and control the distribution of harvested rain water.

    By Lindsay Corporation based in Omaha, NEBRASKA (USA).

  • Premium

    Grease removing in wastewater pipes

    Whether a collection system is handling domestic, commercial, or industrial waste; grease accumulation causes problems in wet wells, lift stations and pipelines. Problems with grease include interference with wet well level controls, reduced wet well capacity, plugging of pipes and pumps, and unsafe working conditions.

    By Carus Corporation based in Peru, ILLINOIS (USA).

  • Premium

    Chemical Water Treatment for equipment & engineering

    Equipment and Engineering offers the right solution for your application of Kurita Products. Starting from simple dosing pumps up to specific dosing systems for special applications Kurita provides you the right solution for your application. Moreover Kurita offers also monitoring and control equipment to analyze that the right concentration of your Kurita products is being used in your system. Further Kurita provides specific equipment to follow the KPIs of your system, so you can be sure that the expected treatment effect is achieved.

    By Kurita based in Ludwigshafen, GERMANY.

  • Premium

    Applications and Air Pollutants Removed in the Chemical, Pharmaceutical and Plastics Industries

    Supplying for over 35 years reliable air pollution control equipment and systems for removal of all gaseous compounds, particulate and odors from chemical process operations, reactors, dryers, calciners, membrane cells, pharmaceutical reactors and tablet dryers, crystallizers, vessel filling and storage vent emissions, emergency scrubbing of high concentration gas releases from cylinders, vacuum pump emissions, Quench /scrubber systems for acid gases and particulate from high temperature thermal oxidizers.  Gaseous emissions from piloting operations and research lab hoods. Specialty NOx abatement for explosives manufacturing and other process operations. Recovery and re-concentration of acids and other gaseous contaminants including by-product production.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Nitrogen Generator for Selective Soldering

    When it comes to being able to generate high quality selective soldering joints, you need a consistent and high purity nitrogen supply. That’s where Gas Control Systems and our nitrogen generator comes in.

    Understanding the Importance of Nitrogen in the Selective Soldering Process

    First off, by using a nitrogen atmosphere for selective soldering, the dross that normally happens as part of the process is reduced. In contract, in an atmosphere that is open to the surrounding environment, dross formation can overwhelm the solder nozzle and pump. This can lead to additional pump maintenance and having to stop for added cleaning.

    By Gas Control Systems, Inc (GCS) based in Sparta, MICHIGAN (USA).

  • End Point Detection

    Hiden Ion Milling Probe – End Point Detector The only dedicated end point determination tool for ion etch control and optimum process quality. End point Analysis. Target Impurity Determination. Quality Control / SPC. Residual Gas Analysis. Leak Detection The IMP is a differentially pumped, ruggedized secondary ion mass spectrometer for the analysis of secondary ions and neutrals from the ion mill process, featuring: High Sensitivity SIMS / MS with Pulse Ion Counting Detector. Triple filter Quadrupole, 300 amu mass range is standard. Differentially Pumped Manifold With Mounting Flange to Process Chamber. Ion Optics with Energy Analyser and integral ioniser. Penning Gauge and interlocks to provide over pressure protection. Data System with integration to the process tool. Stability (less than ±0.5% height variation over 24 h). MASsoft control via RS232, RS485 or Ethernet LAN. Programmable DDE, Parallel Digital I / O, RS232 Scripting Communication

    By Hiden Analytical based in Warrington, UNITED KINGDOM.

  • Water treatment for muni and industrial

    With our network of Municipal manufacturer`s representatives, we provide integrated water treatment, pumping and water management solutions for municipal and industrial applications. We are systems integrators who offer the expertise and flexibility to provide treatment, pumping, controls, monitoring, service and support. We provide an unbiased evaluation of the best capital and operating cost solution for your municipal and industrial treatment, pumping and water management applications. Through our vast network of vendor/partners we have access to virtually every treatment option and provide the best solution to meet the application requirements and goals.

    By Lindsay Corporation based in Omaha, NEBRASKA (USA).

  • US Peroxide Rapid Response

    US Peroxide (USP) is uniquely positioned to rapidly respond to your environmental treatment challenges. USP combines experienced applications and equipment field support with a large inventory of storage systems and pumping modules to respond quickly to time sensitive water and wastewater treatment situations. Advantages With considerable inventory of tank and pump systems as well as our partnerships with leading chemical suppliers, USP can mobilize chemicals and equipment quickly to respond to your rapid response needs, often within 24 hours. We offer dosing options are designed to meet all safety requirements and sized to meet your specific process and dosage rates requirements. Our Applications Engineers and Equipment and Engineering Services teams will provide timely and thorough applications assistance and technical support during the entire project. Download the Rapid Response Solutions Brochure (PDF) Sample Applications Examples of where our Rapid Response Program has successfully addressed treatment challenges include the following: Temporary application of hydrogen peroxide as a source of supplemental dissolved oxygen in biological treatment systems during periods of excessive BOD loading Hydrogen peroxide pretreatment of high strength wastewater to reduce toxicity or BOD/COD prior to biological treatment Emergency hydrogen peroxide treatment of lagoons or ponds to control hydrogen sulfide and other odors Shock cleaning of cooling water systems for biofouling and slime control

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Agricultural, Storm and Highway Runoff

    The ability to collect useful data about sediment transport and other pollutants closely coupled to SSC (such as nutrients, e-coli, phosphates and nitrates) is dependent on the timing and frequency of manual grab samples during run-off events. Most sediment and pollutant is transported during a small number of storm events which are infrequent and unpredictable. When they do occur, trained personnel or the proper equipment may not be available to collect grab samples. An automated pump sampler can eliminate the need to sample manually, but for the expense of a rechargeable power system, the autosampler, and possibly a datalogger and a typical turbidity probe, you’re no better off. With an automated pump sampler driven by the DTS-12 digital turbidity sensor and controlled by the Axiom H2 datalogger, you obtain a better understanding of the water’s quality, while taking a minimum number of samples, reducing site visits and saving lab analysis costs.

    By FTS based in Victoria, BRITISH COLUMBIA (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you