Only show results available in Virginia? Ok

raw water treatment Applications

  • Premium

    Monitoring Raw Water Intake

    The Situation: Hydrocarbons in water intake used for municipal drinking water and desalination systems are commonly limited to 1 part per million. Problem: Naturally occurring organics in raw water are typically treated with chemicals. Total Organic Carbon (TOC) analyzers in the water treatment system can alert technicians when some type of organic material is present but cannot differentiate between natural organics, such as algae or leaves and hydrocarbons. Solution: A fluorescence monitor can be configured for sensitivity to hydrocarbons, with no significant response to other organics. The TD-4100XDC has the highest sensitivity to hydrocarbons in raw water, has a low cost of ownership, and can be modified with Teflon, Monel, and other corrosion resistant materials for sea water environments. Please visit http://www.oilinwatermonitors.com/applications-2/raw-water-intake for more information about this application.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Customized Solutions for surface water treatment industry

    WesTech offers a holistic approach to surface water treatment for potable use. Depending upon the raw water quality, the flow rate, and operational preferences, WesTech can provide conventional flow, combination treatment units, packaged systems, high-rate processes, or even customized solutions.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Albin peristaltic`s pumps for water treatment

    Pumping / transfert / dosing of sewage thickened, sludge dewatered, sludge clarifier, waste activated sludge, digested sludge, primary sludge, lime milk, raw sludge, sodium hypochlorite, ferric chloride, sodium bisulphite, fluoride, polymers, aqueous am­monia, potassium permanganate, caustic soda.

    By Albin Pump SAS based in Goteborg, SWEDEN.

  • Water treatment for the mining industry

    Water is an integral part of the mining and metal production process. Large quantities of water are required in sufficiently high quality for all areas of mine operations from exploration, mining, processing, smelting and refining. The requirement to provide treated raw water through to water reuse.

    By De Nora Water Technologies based in Colmar, PENNSYLVANIA (USA).

  • Water treatment systems for chemical industry

    The effluents that accrue in the cleaning process of silo vehicles and containers for transportation of raw materials for the chemical industry, are highly complex and constantly changing in the composition of wastewater. Flocculation as the prior art of treatment for chemical waste water can not remove many of the completely dissolved invisible substances. Thus, the residual stresses are evident despite high claritv of the `Treated effluent` is often well above the levels witch are applicable for wastewater in domestic environments.

    By Weidner Ireland Ltd based in IRELAND.

  • Water treatment for meat processing

    Water is one of the single biggest raw materials used in meat processing, and its quality is of great importance to prevent contamination of food product. The use of contaminated water in the processing plant can spread infection across the whole food batch. This is a cause of serious concern to the food industry, consumers and regulatory bodies, besides that, it causes financial losses and food scare. Chlorine dioxide, a very powerful biocide, has a number of advantages over other products commonly used in the meat processing industry. When properly applied, chlorine dioxide can act as a break in contamination thereby reducing/eliminating cross contamination as well as removing superficial microorganisms before they have an opportunity to become attached and penetrate the carcass.

    By Applied Oxidation LLC based in Chattanooga, TENNESSEE (USA).

  • Water treatment for power plants

    The process of electricity generation from fossil fuels such as coal, oil and natural gas is water-intensive. Between 40-50% of all water abstracted and used in developed countries is used in the generation of electricity. Thus, a reliable, abundant and predictable source of raw water supply to a power plant is a critical factor in site selection. Water supplies are required to provide various process waters for the following essential main purposes such as make-up water, cooling water for steam turbine condensers, and auxiliary plant cooling water.

    The primary application of modern water treatment technology is to maintain the integrity and performance of the power plant. Critical plant applications have water purity or conditioning requirements that must be adhered to for safe, reliable and efficient power generation.

    Experience has shown that integration of water technology treatments with power plant design can be very important in reducing operational problems and component failures 

    At power plant worldwide there are increasing limitations on water availability and environmental restrictions on discharges. This is expected to promote measures for water conservation and to have an increasing influence on water treatment decisions. At power plant, the recycling of internal wastewater streams can extend from the recovery of individual high-quality waste streams, which can be reused either directly or after only limited treatment, through to the development of fully integrated water/wastewater treatment systems for zero liquid discharge. However, the application of reuse schemes requires site-specific assessment, as not all waters may be viable options for recovery.

    By De Nora Water Technologies based in Colmar, PENNSYLVANIA (USA).

  • Water Disinfection for Food and Beverage Water Treatment

    MIOX provides advanced chemical solutions to the food, beverage and farming industries for all water treatment applications including source water treatment, surface or groundwater, process water treatment, cooling towers on the facility, bottle and surface disinfection, and clean in place (CIP) for syrups and raw sugars. Our team designs custom solutions to deliver safe, effective, and economically attractive alternatives to minimize or eliminate the use of expensive and hazardous delivered chemicals.

    By MIOX Corporation based in Albuquerque, NEW MEXICO (USA).

  • Water treatment research for pulp and paper industry

    Historically the pulp and paper industry has had little need for desalination and reuse – not least because the majority of production is located near water sources. Four things are changing this state of affairs: The move towards recycling means that production in mills located in “urban forest” areas is rising. These facilities face higher water costs than green forest located mills, and have a greater interest in water efficiency. The fastest growing market for pulp and paper is in China, where raw water sources are both limited and impaired, and water technologies which can address these challenges are at a premium.

    By Global Water Intelligence (GWI) based in Oxford, UNITED KINGDOM.

  • Premium

    Wastewater treatment for the sea- and inland ports/terminals

    Facing the increasing oversea trade, the environmental protection of the oceans is becoming increasingly important. The motto of the International Maritime Organization of the United Nations in London (IMO), “Safe, secure and efficient shipping on clean oceans” confronts the shipping industry and in particular the terminal ports with growing challenges. The stored fuels, raw materials and resources of a country must not pollute the harbor water with their emissions in case of rain. Produced liquid ship waste contains oil emulsion and saline bilge water among others.

    By AWAS International GmbH based in Wilnsdorf, GERMANY.

  • Wastewater treatment for the biofuels

    In these companies, the water to be treated can vary depending on the technology used and on the raw materials. These effluents usually contain high concentrations of contaminants, especially those coming from esterification processes.

    By Aguambiente based in La Cistérniga, SPAIN.

  • Premium

    Biological waste water treatment plants solutions for the pulp & paper industry

    The pulp and paper industry generates large volumes of highly heterogeneous waste waters containing compounds from wood or other raw materials, process chemicals and compounds formed during processing.

    By HydroThane STP BV based in KC `s Hertogenbosch, NETHERLANDS.

  • Premium

    Wastewater Treatment for the Bioenergy Industry

    The waste (water) streams from the production of (bio) ethanol or ethanol spirits are generally very suitable for anaerobic treatment, due to their organic compounds. 

    The effluent streams produced by the different production processes are influences by a great number of parameters such as, process design, milling process, type of raw material, etc. This requires special attention in the design of the treatment plant for this type of industry. 

    Typical streams from these industries that can be treated are, whole stillage, thin stillage, spent wash, vinasse and condensate from evaporator. The Upflow Anaerobic Sludge Blanket (UASB) process and the External Circulation Sludge Bed (ECSB) process from HydroThane are worldwide proven processes for the treatment of this type of waste water.

    By HydroThane STP BV based in KC `s Hertogenbosch, NETHERLANDS.

  • Biological wsatewater treatment for dairies

    Dairy raw wastewater is characterized by high concentrations and fluctuations of organic matter and nutrient loads related to the discontinuity in the cheese production cycle and machinery washing. Because the dairy industry is a major water user and wastewater generator, it is a potential candidate for wastewater reuse. Biowater’s wastewater system is based on highly efficient biofilm technology and is ideal for this type of application, one that requires pretreatment prior to discharge to a municipal sewage system.

    By Biowater Technology based in Cumberland, RHODE ISLAND (USA).

  • Wastewater treatment for the chemical and pharmaceutical industry

    The water from pharmaceutical companies can cause big troubles because of the high variability in their manufacturing processes. Depending on the kind of raw materials used, the effluents may even be toxic, hence why the most conflictive effluents have to be separated from the rest and not to be sent to the general treatment.

    By Aguambiente based in La Cistérniga, SPAIN.

  • Wastewater treatment for the food industry

    Companies in the food industry need large amounts of water – as an ingredient of their products, but also – in large amounts – for the production process and for the cleaning of raw materials, machines and equipment. Water cleans, washes and is processed. Using this essential resource carefully helps to reduce costs. The biological wastewater treatment process by DAS Environmental Expert enables companies to recycle usage water and therefore lower overall consumption.

    By DAS Environmental Expert GmbH based in Dresden, GERMANY.

  • Premium

    Drinking water solutions for the coagulation optimization

    Problem: Drinking water plants that use surface water or ground water under the influence of surface water are susceptible to high levels of organic matter in the raw water. Reduction of organic matter through coagulation/sedimentation and filtration is important to lower the potential for disinfection by-product formation (DBP) and limit operational problems. In addition, organics in water consume the polymers used for the coagulation process, which reduces the efficiency of the treatment. Therefore, optimization of the polymer dosing heavily depends on the concentration of organics.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Premium

    Drinking water solutions for the source water monitoring/ protection

    Problem: A challenging aspect of drinking water treatment is often predicting or monitoring the changes that occur with incoming water quality. Seasonality, weather events, agricultural practices or upstream discharges can influence the quality of both ground and surface water over time. With multiple variables impacting source waters, monitoring historical trends may not be sufficient to predict raw water changes or detect uncharacteristic events.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Automated solutions for the aeration lagoon / pond dredging

    LWT`s dredging systems are used for aeration lagoon / pond dredging applications. A dredging system for removal and disposal of raw sewage solids, decayed algae and microorganisms, and algae-laden sludge results in a long term solution for treatment plants. Aeration lagoon / pond dredging increases lagoon storage volume, provides improved detention time, and accommodates increased plant flow.

    By Liquid Waste Technology LLC (LWT LLC) based in New Richmond, WISCONSIN (USA).

  • Premium

    Industrial solutions for manufacturing industry

    WesTech partners with manufacturing in every industry worldwide. For raw water treatment, wastewater treatment and water reclamation, process equipment supplied and manufactured by WesTech is designed to work and built to last. Design-build, plant expansions, and upgrades are each approached from a holistic view of the flow sheet and a broad base of experience in yours and other industries with similar challenges, always with an eye for efficiencies that go to the bottom line.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you