Only show results available in Virginia? Ok

reagent Applications

  • Premium

    Hydrocyclones for flue gas desulfurization FGD power applications

    KREBS Flue Gas Desulfurization Cyclones: High capacity Krebs gMAX® cyclones for reagent preparation and gypsum dewatering in FGD systems. Our Hydrocyclones and Technequip Knife Gate valves are used in Power Plants around the world.

    By FLSmidth KREBS based in Tucson, ARIZONA (USA).

  • Premium

    Dosing pumps for water and wastewater treatment industry

    Peristaltic pumps are proven performers in water and waste treatment solving problems including: Dosing and metering treatment chemicals and reagents including ferric chloride (“Ferric”), sodium hypochlorite (“Hypo”), chlorine water, lime (Kalic or Kalkmilch), caustic soda, powder activated carbon and polymers, sludge transfer, filter press feeds.

    By Verderflex Peristaltic Pumps - part of the Verder Group based in Castleford, UNITED KINGDOM.

  • Premium

    Emission control & air dedusting for fuel oil boilers

    For PM emission control in high temperature exhaust streams, such as fuel oil boilers, usual dedusters such as bag filters are very maintenance demanding. Particularly, diesel and fuel particulates are very sticky and clog to filter elements, unless protection reagents are used. Flue gas cooling is also needed in front of the filter when temperatures are higher than 200 ºC. On the other hand, regular cyclones and multicyclones are frequently not able to reduce emissions to present emission limits.

    By Advanced Cyclone Systems, S. A. based in Porto, PORTUGAL.

  • Premium

    Air pollution control solution for the Ammonia and odour

    Control of emissions is often required due to the hazardous nature of the contaminant. Often, control or removal is necessary due to offensive odours. Ammonia, sulfur and other related compounds fall in these categories. Macrotek offers many control technologies to capture ammonia and other odour causing contaminants. Reagents are often used to neutralize and stabilize the by-product.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Premium

    Air Pollution Control Solution for the Hydrogen Sulfide (H2S)

    Hydrogen Sulfide is lethal if released. Macrotek is a leader in developing advanced technologies for optimum removal and treatment. Our experience includes many installations using caustic, oxidizing reagents, catalytic and forced oxidation combination, and biofilters. Each application is unique and requires custom solutions.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Premium

    Gas monitoring instruments and systems for phosgene monitoring

    Phosgene COCl2 is a colorless gas. While it has been used as a Chemical Weapon Agent (CWA) in the past, currently this poisonous gas is also an important reagent in synthesis in the pharmaceutical and chemical industries. The plants using phosgene are typically equipped with gas sensors to detect leaks in the indoor ambient air. The critical situations arise when equipment in contact with the gas at the manufacturing facilities are serviced and maintained. As phosgene is very poisonous, even small gas pockets in serviced equipment may be dangerous to maintenance personnel. Gasmet™ FTIR Gas Analyzers are ideal tools to monitor point sources of phosgene. The measurement technology has high specificity, may be operated continuously, and has a fast response time.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Gas monitoring instruments and systems for process NOx measurement

    Nitric acid HNO3 is an important intermediate reagent for production of several important end products, such as fertilizers, explosives, dyestuffs/pigments, pesticides, pharmaceuticals, photographic materials, plastics, and synthetic fibers. At nitric acid manufacturing plants, the Gasmet™ FTIR Gas Analyzer can be used to measure several gaseous components from the process stream for purposes of process control. A single system can be used to measure the high levels of nitrogen monoxide NO and nitrogen dioxide NO2, as well as water vapor H2O, nitrous oxide N2O, carbon monoxide CO, carbon dioxide CO2 and ammonia NH3. The fixed installation products for these purposes are the Gasmet™ CEM II measurement system, and the Gasmet™ FCX Gas Analyzers, both of which utilize the FTIR measurement technique for simultaneous multicomponent analysis of the sample gas.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Air Pollution Control Solution for the FGD - SO2

    Flue Gas Desulfurization (FGD) involves the removal of sulfur dioxide and other acids from flue gases. Typical sources of acid gases include fossil fuel boilers, waste combustors, and other industrial applications such as refining and smelting. The Macrotek wet and dry FGD systems can achieve over 99% acid removal by using a variety of reagents, including caustic, sodium carbonate, lime and limestone, and waste alkaline solids or liquids.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Premium

    Online Monitoring for the Drinking Water Industry

    AppliTek manufactures wet-chemical analyzers specifically designed for measuring on a continuous base the quality indices of drinking water, from raw water intake up to distribution level. Our systems have a small footprint, reduced reagent consumption and show excellent levels of detection in compliance with modern standards.

    On top of that, the delivery of safe water throughout the water cycle will raise the need for efficient monitoring systems detecting in real-time contaminations. `Broadband toxicity`, a non-specific parameter defined by AppliTek, is a prodigiously new and clean technology for safeguarding drinking water.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Air pollution control solution for the NOx and CO2

    Specific industrial applications require wet end of pipe treatment for NOx or CO2. Macrotek offers absorbers utilizing various reagents for neutralization of NOx or CO2. NOx scrubbing is particularly suitable in situations where Nitric Acid can be utilized elsewhere in the plant, as it is a scrubbing product. As CO2 regulations become more stringent, methods for reducing emissions are continually being evaluated. Macrotek offers CO2 scrubbing technology which isolates CO2 in a contaminated stream to produce a pure CO2 product, making sequestration a more appealing option.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • In-Situ Soil & Groundwater Remediation

    The use of H2O2 to chemically oxidize the contaminants into mineralized products (CO2 , salts, and readily biodegradable organic fragments) offers a number of advantages over these current treatment methods. Benefits of Soil Decontamination by Chemical Oxidation: The reagent used (H2O2) is inexpensive, readily available, and has as its reaction products water and oxygen; The chemistry of the process (Fenton's Reagent) has been known for over 50 years and its applicability to a wide variety of contaminants is well documented; The process is easily applied and controlled; The treatment occurs rapidly, lasting from a few hours to a few weeks; The process produces no by-product wastestreams, and can be tuned for the degree of contaminant removal desired. This allows it to be used synergistically with other technologies such as biotreatment or soil washing.

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Automated System for High Throughput PCR Setup

    Modern genomics labs are looking for high-throughput, quality-data workstations to perform PCR reactions at a reduced cost. PCR reaction setup is a tedious and time consuming process as it requires mixing multiple reagents in specific ratios to achieve the proper master mix for amplification. Moreover, the exact volumes of the reagents and buffers depend upon the total number of samples to be amplified and the desired final concentration of sample DNA. Automation of such procedures eliminates both human error and contamination problems generally associated with manual process. To provide an automated solution to such a cumbersome protocol, Aurora Biomed’s VERSA 110 PCR Setup Workstation was developed for the preparation of reagents and samples used in an amplification protocol in 96-well format.

    By Aurora Biomed Inc. based in Vancouver, BRITISH COLUMBIA (CANADA).

  • Active Refinery Remediation

    Waste Management Unit (WMU) closures at this active refinery Waste Management Unit (WMU) closures at this active refinery - Installation of several soil, Liquid Boot, and full multi-layer geocomposite cover systems in various facility locations- - Sensitive construction practices including large scale activities near power lines, 30 inch raw water line, and several active emergency flares - Completed performance based in-situ solidification/stabilization, cap and closure, using ENTACT owned large diameter auger Delmag rig and custom-fabricated Geodrill - COC`s include heavy metals, PAH, volatile organic compounds, and petroleum hydrocarbons Performance criteria include an unconfined compressive strength of 10 psi, permeability coefficient of less than 2.1x10-6 cm/sec, and an admixture pH of less than 11.5 - ENTACT performed in-house treatability analysis to develop reagent admixture

    By ENTACT, LLC based in Grapevine, TEXAS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you