Only show results available in Virginia? Ok

real-time process monitoring Applications

  • Real-time In-situ Effluent Monitoring

    The UviLux BOD Indicator enables in-situ, real-time, reporting of BOD within both natural water systems and water processing plants. The monitor detects fluorescent proteins that are inherent within sewage and slurry and provides an output in BOD equivalent units. The principle behind the measurement is the excitation of Tryptophan-like fluorescence within UV wavelength band, which has been shown to correlate with both BOD and bacterial contamination. With complete flexibility of deployment methodology, the UviLux BOD Indicator can be applied to both water supply and water recovery processing plants. For water supply processing, the UviLux BOD Indicator can be applied at the front end to the water intake to provide alarm of any contaminated water entering the plant. Applications within Waste Water Treatment Works can include monitoring of effluent levels at the final outflow point (into rivers and coastal areas) as well as the primary, secondary & tertiary stages, the data potentially feeding into energy saving systems to optimise process performances. The CTG UviLux BOD Indicator in-situ fluorometer can also be used within pipe and channel networks to test for incidences of black water and grey water cross-over.

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • Contrail(R) - for real-time hydrometeorological monitoring and early flood warning

    Visualization of information from your hydrometeorological & early flood warning network in a matter of seconds is critical in the decision making process. Contrail supports the data collection, processing, archiving and dissemination of your hydrometeorological and water resources data in one place. OneRain's Contrail enterprise level software platform collects, processes and archives rainfall, flow, stream level, weather station and many other hydrometeorological data from multiple sources including ALERT/ALERT2 line-of-sight radio data, cellular data, and satellite weather gauge data, and any web-accessible data sources as well as neighboring outside sources such as USGS gauges, METAR, TIDES, HADS, RWIS... . The platform supports any number of users from their laptops, their smartphones, their tablets, however they are connected to the Internet. At its core are the advanced alarm and notification capabilities. Used in Early Flood Warning, Safety of Dams, Emergency Management...

    By OneRain Incorporated based in Longmont, COLORADO (USA).

  • Gas monitoring during industrial process

    EM-5 CEMS Coal power plant: Entrance of SCR denitration device, NOx O2 Exit of SCR denitration device: Measure remanet NH3 after reaction and avoid blocking by crystallization, NH3; Calculate denitrification rate with Nox input, NOx O2 Gas-fired power plant: Counting tail gas emission and realtime concentration, NOx O2 SO2 Temperature pressure flow dust

    By HANGZHOU ZETIAN TECHNOLOGY CO., LTD based in Hangzhou, CHINA.

  • Laser detection solutions for water-quality monitoring

    The technology of Spectral Fluorescence Signatures (SFS) is a very sensitive and selective tool to monitor many industrial processes on site and in real-time. The SFS analyzer series – SFS-Scanner and Instant Screener spectrofluorometers - are capable of detecting target substances even in complex mixtures without any pre-treatment of the samples.

    By Laser Diagnostic Instruments AS based in Tallinn, ESTONIA.

  • Water measurement systems & sensors for water quality monitoring

    Effective water quality monitoring is the key to environmental protection of watercourses and for reliable process control and wastewater treatment.  Discharge consents under EPR regulations dictate that water quality monitoring is undertaken to ensure that consented parameters are below the consented concentrations.  Traditionally this has been done using water quality sampling methods but increasingly automatic water quality measurement sensors linked to real-time telemetry is seen as the most reliable and timely means of ensuring that treatment processes are operating efficiently and that EPR compliance is maintained.

    By Isodaq Technology - Hydro-Logic Group based in Bromyard, UNITED KINGDOM.

  • Premium

    Mercury monitoring for on-site remediation

    Fugitive emissions can be a health concern during removal and disposal of mercury-contaminated material at remediation sites. Thus, remediation projects either indoors or outdoors often require on-site, real-time mercury air monitoring with a Tekran 2537. This assures permitted levels are not exceeded during waste processing and human exposure levels are below government regulated toxicity thresholds. Often multiple sites must be monitored continuously. The Tekran 1115 Multi-Port Sampler is the ideal tool for multiplexing the Tekran 2537 for real-time continuous on-site monitoring of mercury fugitive emissions. Please contact us for more information on mercury remediation monitoring.

    By Tekran Instruments Corporation based in Knoxville, TENNESSEE (USA).

  • Weather Monitoring Systems for industrial and utility sector

    The weather can have a major impact on many industrial processes and operations, both from an operational efficiency and/or safety standpoint. For example, real-time information about ambient atmospheric conditions provides the necessary input data required to make the proper decisions during an industrial emergency involving any type of hazardous material. Depending on the plant type, size and age, the federal Environmental Protection Agency (EPA), as well as municipal and state environmental regulatory organizations, also require that a number of basic meteorological variables are measured and recorded on site to ensure compliance with environmental regulations.

    By Climatronics Corporation based in Bohemia, NEW YORK (USA).

  • Premium

    Improved Reproducibility and Reduced Sample Preparation Time for the HPLC Analysis of Aflatoxins in Raw Peanut Paste

    The US FDA and international regulatory agencies have set contamination levels for aflatoxins in animal feedstuffs. Since Aspergillus may infect commodities pre-harvest, during storage or during processing, monitoring for aflatoxins in associated agricultural commodities at all stages of production is requisite. Field screening methods exist that are adequate to estimate contamination levels for aflatoxins. When additional confirmation or quantification is desired, chromatographic laboratory analysis is often necessary. Preparation of matrix samples prior to chromatographic analysis typically requires extraction and purification. Commonly, immunoaffinity columns (IAC), which employ a multi-step bind and elute mechanism to concentrate and purify aflatoxins, are used to purify matrix samples for subsequent analysis. Solid phase extraction (SPE), an alternate method which may use interference removal, can also be employed.

    By Sigma-Aldrich Co., LLC based in Bellefonte, PENNSYLVANIA (USA).

  • Quantitative Agricultural Analyses

    ASD’s NIR measurement solutions are ideal for the qualitative and quantitative agricultural analysis necessary throughout the entire production process, including process monitoring of fermentable sugars and enzymatic activities for increased product yield. The ability to analyze large numbers of samples simultaneously in real-time, continuously, and non-destructively, provides significant advantages in the manufacturing stage. The flexibility of ASD systems allows this at virtually any point in the processing stream where determining constituent or final product quality is critical to the success of your operation.

    By ASD Inc., a PANalytical company based in Boulder, COLORADO (USA).

  • Exhaust Gas Emissions

    Hiden gas analysis systems provide for high sensitivity, wide dynamic range, real-time analysis of almost any gas/vapour. Hiden’s application specific gas analysis systems are tailored to meet the specific application requirements, & include a range of special sampling, vacuum pumping & vacuum accessories. Hot zone sampling accessories are included for evolved gas analysis from furnaces, & thermo gravimetric analysers, TGA, for example. Thermal analysis methods are vital for catalysis characterization. For thermal analysis including TPD/TPO/TPR studies, Hiden gas analysis systems include enhanced pumping for hydrogen and special close coupled sampling to the TPD/TPO/TPR reactor for optimum thermal analysis response. In Biogas applications the simultaneous analysis of H2S, CO2, water vapour & CH4 in the PPM to 100% concentration range provides vital ininformation for process development and process monitoring...

    By Hiden Analytical based in Warrington, UNITED KINGDOM.

  • Cetane Number of Diesel Fuels #3010

    The Cetane number of a diesel fuel is a measure of the ignition properties and is an important specification that must be met during fuel production. The traditional laboratory method for Cetane number determination is the knock engine method in which the fuel is burned and its combustion characteristics compared to known standards. This method is time and labor intensive, and provides no ability for real time control of production. This note discusses the use of Guided Wave hardware and software tools for the measurement of Cetane number in diesel fuel using fiber optic-based, Near-Infrared (NIR) spectroscopy. NIR is applied in real-time directly in process monitoring or as a laboratory procedure. In either case NIR is a time and money saving alternative to traditional methods.

    By Guided Wave Inc, based in Rancho Cordova, CALIFORNIA (USA).

  • Microbial Studies

    Hiden gas analysis systems provide for high sensitivity, wide dynamic range, real-time analysis of almost any gas/vapour. Hiden’s application specific gas analysis systems are tailored to meet the specific application requirements, & include a range of special sampling, vacuum pumping & vacuum accessories. Hot zone sampling accessories are included for evolved gas analysis from furnaces, & thermo gravimetric analysers, TGA, for example. Thermal analysis methods are vital for catalysis characterization. For thermal analysis including TPD/TPO/TPR studies, Hiden gas analysis systems include enhanced pumping for hydrogen & special close coupled sampling to the TPD/TPO/TPR reactor for optimum thermal analysis response. In Biogas applications the simultaneous analysis of H2S, CO2, water vapour & CH4 in the PPM to 100% concentration range provides vital information for process development and process monitoring.

    By Hiden Analytical based in Warrington, UNITED KINGDOM.

  • Octane Number of Gasoline using NIR Spectroscopy #3012

    When every second counts and performance is on the line Guided Wave's NIR analyzers allow for easy measurement of octane numbers in gasoline and refinery production units using fiber optic -based, near-infrared (NIR) spectroscopy. *Fast and reliable measurement of the octane number of gasoline (RON & MON). * Control gasoline production in real-time directly with in process monitoring. * Certify gasoline meets specification before release. *Gain significant improvements in process control. *Minimize the need for laboratory sample collection and the labor intensive "knock engine" method. The measurement of the octane number of gasoline using NIR spectroscopy is both fast and reliable utilizing Guided Wave analyzers. Results are available in real-time (seconds) for multiple parameters in complex streams. Request Application Note #3012

    By Guided Wave Inc, based in Rancho Cordova, CALIFORNIA (USA).

  • Gas Analysis Systems for Catalysis, Thermal Analysis, Fermentation and Bio Fuels

    Hiden gas analysis systems provide for high sensitivity, wide dynamic range, real-time analysis of almost any gas and vapour. Hiden’s application specific gas analysis systems are tailored to meet the specific application requirements, and include a range of special sampling, vacuum pumping and vacuum accessories. Hot zone sampling accessories are included for evolved gas analysis from furnaces, and thermo gravimetric analysers, TGA, for example. Thermal analysis methods are vital for catalysis characterization. For thermal analysis including TPD/TPO/TPR, studies, Hiden gas analysis systems include enhanced pumping for hydrogen and special close coupled sampling to the TPD/TPO/TPR reactor for optimum thermal analysis response. In Biogas applications the simultaneous analysis of H2S, CO2, water vapour and CH4 in the PPM to 100% concentration range provides vital information for process development and process monitoring.

    By Hiden Analytical based in Warrington, UNITED KINGDOM.

  • Beverage Analysis

    Hiden gas analysis systems provide for high sensitivity, wide dynamic range, real-time analysis of almost any gas/vapour. Hiden’s application specific gas analysis systems are tailored to meet the specific application requirements, & include a range of special sampling, vacuum pumping and vacuum accessories. Hot zone sampling accessories are included for evolved gas analysis from furnaces, & thermo gravimetric analysers, TGA, for example. Thermal analysis methods are vital for catalysis characterization. For thermal analysis including TPD/TPO/TPR studies, Hiden gas analysis systems include enhanced pumping for hydrogen and special close coupled sampling to the TPD/TPO/TPR reactor for optimum thermal analysis response. In Biogas applications the simultaneous analysis of H2S, CO2, water vapour & CH4 in the PPM to 100% concentration range provides vital information for process development and process monitoring

    By Hiden Analytical based in Warrington, UNITED KINGDOM.

  • Fragrance Fingerprinting

    Hiden gas analysis systems provide for high sensitivity, wide dynamic range, real-time analysis of almost any gas & vapour. Hiden’s application specific gas analysis systems are tailored to meet the specific application requirements, & include a range of special sampling, vacuum pumping & vacuum accessories. Hot zone sampling accessories are included for evolved gas analysis from furnaces, and thermo gravimetric analysers, TGA, for example. Thermal analysis methods are vital for catalysis characterization. For thermal analysis including TPD/TPO/TPR, studies, Hiden gas analysis systems include enhanced pumping for hydrogen and special close coupled sampling to the TPD/TPO/TPR reactor for optimum thermal analysis response. In Biogas applications the simultaneous analysis of H2S, CO2, water vapour and CH4 in the PPM to 100% concentration range provides vital information for process development and process monitoring.

    By Hiden Analytical based in Warrington, UNITED KINGDOM.

  • Cloud software solutions for fleet operators using fuel

    The top run fleet operators use Titan software to get them down the road more efficiently. Whether it`s monitoring tank alarms in real-time, optimizing inventory across a network of both USTs & ASTs, or more efficiently managing fuel-system compliance, Titan makes heroes of fuel and environmental managers in the rent-a-car and transport industry. For starters, Titan mitigates your core environmental risks, arming you with a central dashboard and effective management tools that keep you on top of it all. This includes ATG alarms, release detection data, testing results, inspections, NOVs, and environmental-related forms, photos, and documents. Next, we hand over the key to responsible ATG network management, with on-demand tank inventory and remote gauge configuration to ensure you can effectively optimize your in-ground and above ground fuel. Finally, Titan streamlines your maintanance and work order process, linking you with site-level employees, techs, vendors, and field team members to centrally manage all facility requests in one system. In short, Titan software helps you run a better, more efficient rent-a-car or commercial fleet operation.

    By Titan Cloud Software Company, LLC based in Brentwood, TENNESSEE (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you