Only show results available in Virginia? Ok

recovery separator Applications

  • Industrial water Uranium recovery & purification

    The type of Uranium mineralization and the nature of its association within a particular deposit will have a major impact on process route selection. Uranium minerals are classified according to their influence on extractive metallurgy. The presence of impurities such as Vanadium, Molybdenum, and others may dictate that ion exchange is to be employed.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Industrial water Copper removal and recovery

    Pure copper is soft and malleable; a freshly exposed surface has a reddish-orange color. It is used as a conductor of heat and electricity, a building material, and a constituent of various metal alloys. Recycling is a major source of copper in the modern world. A combination of economic and regulatory factors are now at work to make metal recycle and water reuse very attractive.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Oil Water Separator for Hydrocarbon Recovery from Flowback, Produced Brinewater

    Hudson Oil Water Separators can be used to reclaim more oil and hydrocarbons from flowback, produced water, brine water or waste water before sending this value stream to disposal/injection sites. To enhance recovery even further package a Hudson Separator with a Wilsa ElectroWaveTM Conditioner for ultimate results. Up to 99.999% of oil and hydrocarbons recovered, including emulsified oils. Please call us today to evaluate your recovery potential.

    By Hudson Industries based in Vienna, OHIO (USA).

  • Industrial water Zinc recovery from pickling acid solution

    The zinc chloride is to be removed from pickling acid at 6N concentration. Under these conditions, the ZnCl2 will form a stable complex and may be removed by PuriTech`s ION-IX technology using an anion resin. The resin is then eluted with water.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Premium

    Metal Sorting - Wire Recovery

    Cable materials were often lost in the treatment and sorting processes available till now, which meant a financial loss due to the high proportion of copper they contain. New sorting technologies such as the FINDER are now capable of detecting these cables. Recently it has become possible to separate metals and copper cables. Previously, cable materials were often lost in the treatment and sorting process. This meant a financial loss due to the high proportion of copper they contain. New sorting technologies such as the FINDER and the FINDER [poly] are now capable of detecting these cables, transferring them to a metal product and then finally sorting them in a further step into a cable fraction of outstanding purity.

    By TOMRA Sorting (TITECH) based in Mülheim-Kärlich, GERMANY.

  • Premium

    Recycling Systems for the recovery of secondary materials

    The recovery and reclamation of recyclable materials in the waste stream is possible through various selection and separation processes.In the case of materials such as PP, PET, HDPE, plastic, paper, aluminium etc. can be put back into circulation creating new raw materials, the so called “secondary” raw materials, produced not by nature but by man.

    By Macpresse Europa S.R.L based in Vernate, ITALY.

  • Enhanced Oil Recovery - Produced/ Impaired/ Wastewater

    WILSA® technology improves the efficiency of existing separation equipment in produced/ impaired water. The non-chemical ElectoWave Conditioning system supercharges Stokes Law to break emulsions, enhance coalescing, reduce viscosity and retention time. This allows traditional/ existing separators to function more efficiently and to either reduce or eliminated chemical programs used to achieve separation.

    By Hudson Industries based in Vienna, OHIO (USA).

  • Aquatech Enhanced Oil Recovery (EOR)

    In a Steamflood Enhanced Oil Recovery (EOR) process, steam is injected in the well, lowering the viscosity of heavy oil suitable for extraction through the production wells. The fluid from the wells is a mixture of oil, water and gas and goes through a separation system to separate the three. The separated produced water is heavily contaminated with dissolved solids and hydrocarbons. Aquatech’s Steamflood Enhanced Oil Recovery (EOR) Technology offers the integrated solutions for the treatment EOR produced water for boilers, generating a purified product that can be reused for the production and injection of steam. Our turnkey approach to treatment includes coordinating the logistics of wastewater removal off-site and any sludge disposal.

    By Aquatech International Corporation based in Canonsburg, PENNSYLVANIA (USA).

  • High performance separation system for hydrotreating industry

    The key to optimizing a hydroprocessing unit is to maximize the life of the catalyst bed and increase energy efficiency of the furnaces. Our goal is to eliminate fouling of the catalyst bed by particles and aqueous fluids and the dissolved components within them as well as fouling of hydrogen recovery membranes and furnace-burner tips.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • Wilsa ElectroWaveTM Conditioning - Non-chemical water conditioning, break emulsions, enhance recovery

    Hudson Industries (a licensed partner) is now offering the patented Wilsa ElectroWaveTM Conditioner (EWC) for non-chemical water conditioning that provides enhanced oil recovery up to 99.999% with the power to break difficult emulsions. The Wilsa Effect is targeted at polar fluids, such as water. The Wilsa EWC directly targets the surface and interfacial tension of water molecules which breaks emulsions and forces the water to reject foreign matter such as oil and suspended solids. Furthermore viscosity is greatly reduced which allows the now coalesced oil to exit the water column with less friction, thus Stokes Law is fundamentally enhanced and retention time is greatly reduced. Combine the Wilsa EWC with your existing separation equipment or pair it with Hudson Coalescing Separator for maximum oil recovery/ removal. Contact us today for more information about Hudson Separators and Wilsa ElectroWaveTM Conditioning.

    By Hudson Industries based in Vienna, OHIO (USA).

  • High performance separation system for lube oil industry

    Many lube oil recovery processes create aqueous and hydrocarbon emulsions that are difficult to separate by means of conventional liquid/liquid separations technology. Accomplishing the desired separation requires that these emulsified droplets be captured. Conventional coalescers are unable to provide the degree of brightness and clarity associated with good separation due to the inability to capture and remove the most penetrating droplets that indicate carry-over. Pentair Porous Media technologies have been developed to address the inherent deficiencies of the conventional coalescers.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • Premium

    Particle Filtration for the Biotechnology / Chemical Industry

    In chemical and biotechnological applications, we use our ceramic membranes successfully for protein concentration, cell separation, recovery of catalysts, filtration of dyestuffs, and more.

    By atech innovations gmbh based in Gladbeck, GERMANY.

  • Premium

    Products for electric cables and radiators recycling

    Compact machines and lines for the recovery of copper and aluminum by milling and dry separation of the metal from the insulating part, from aluminum or copper (ex. radiators).

    By Guidetti S.r.l. based in Renazzo (FE), ITALY.

  • Premium

    Mineral sorting for the mineral industry

    The processing of minerals places a high demand on the sorting process. REDWAVE offers flexible sorting systems which are highly effective in separating impurities from valuable minerals. The separation occurs on the basis of colour, shape, structure or material property. REDWAVE guarantees high throughput with effective recovery of required materials, achieving maximum return on the separated commodities.

    By REDWAVE a division of BT-Wolfgang Binder based in Gleisdorf, AUSTRIA.

  • Premium

    Plastic sorting for the plastics industry

    REDWAVE is a flexible system with applications in a variety of fields, especially for the plastics industry. No matter how complex the sorting task may be the REDWAVE range of sorting equipment can achieve high levels of purity. REDWAVE guarantees high waste throughput with effective recovery of required materials, achieving maximum return on the separated commodities.

    By REDWAVE a division of BT-Wolfgang Binder based in Gleisdorf, AUSTRIA.

  • Premium

    Industrial solutions for pulp and paper industry

    Sedimentation, flotation, mixing, pulp separation and chemical recovery systems are among the myriad of process equipment WesTech supplies to the pulp and paper industry. Customized to the unique needs of operating plants, WesTech liquid/solids and liquid/liquid separation expertise is built upon years of working with plant operators and owners. The result is a working relationship and reliable process.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you