Only show results in Virginia? Ok

recovery well Applications

  • Oil spill recovery

    As the exploration for oil and gas enters areas of greater environmental vulnerability, the need for proven, reliable and robust equipment is doubly important. DESMI continues to answer this challenge with existing as well as specially developed oil spill recovery systems to operate in the most difficult and harsh environments known to man. This equipment is known as the ARCTIC range. This is a special tool kit of systems to enable you to successfully contain, recover and store hydrocarbons in the Arctic environmen...

    By DESMI A/S based in Noerresundby, DENMARK.

  • Waste recovery for construction industry

    Construction waste consists of unwanted material produced directly or incidentally by the construction industry. This includes materials that may contain lead, asbestos or other hazardous materials. There is increasing pressure on the construction industry to dispose of this hazardous material in an environmentally responsible manner. Tetronics can help alleviate this pressure by providing waste recovery plants to deal with all types of hazardous wastes generated from a construction projects lifespan: from land...

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Premium

    Ultraviolet disinfection systems for the well injection water & SRB reduction

    Microorganism and bacteria control is increasingly an important topic of discussion in the oil and gas industry. Inadequate disinfection and treatment of well injection water and stimulation fluids, used in the recovery of oil and gas has been proven to lead to a host of negative consequences, including: - Souring the well with hydrogen sulphide gas H2S, Microbiological induced corrosion, Loss of fluid stability during injection., Plugging of the well, Damage of equipment and components (e.g. RO membranes,...

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Aquatech Enhanced Oil Recovery (EOR)

    In a Steamflood Enhanced Oil Recovery (EOR) process, steam is injected in the well, lowering the viscosity of heavy oil suitable for extraction through the production wells. The fluid from the wells is a mixture of oil, water and gas and goes through a separation system to separate the three. The separated produced water is heavily contaminated with dissolved solids and hydrocarbons. Aquatech’s Steamflood Enhanced Oil Recovery (EOR) Technology offers the integrated solutions for the treatment EOR produced water...

    By Aquatech International Corporation based in Canonsburg, PENNSYLVANIA (USA).

  • Activated carbons for precious metal recovery and mining industry

    Activated Carbon has a major role in various applications across the mining industry, particularly in gold recovery. Activated Carbon fulfills a crucial role as the key element in Heap Leach Circuits, Carbon in Leach, and Carbon in Pulp processes. Carbon Activated Corp. has a well developed history of supplying goldmines across the USA, South America, Turkey and a number of other gold producing territories. We are a major manufacturer of activated carbon specialized for the gold mining industry and precious...

    By Carbon Activated Corporation based in Compton, CALIFORNIA (USA).

  • Premium

    Data loggers and data acquisition monitoring solutions for the mining oil & gas industries

    Applications in the oil and natural gas industry include recovery and processing, monitoring temperature and pressure of steam and other factors in oil wells, water pressure, pumping efficiency, and more. CAS DataLoggers provides dataTaker loggers with universal input channels for a wide range of input signal types.

    By CAS DataLoggers based in Chesterland, OHIO (USA).

  • Premium

    Data loggers and data acquisition monitoring solutions for the oil & gas sector

    Selection of oil gas data loggers for monitoring & recording data in the field. Robust, programmable, universal-input, multi-channel, remote models with up 48 inputs for any measurement requirement. Oil and gas industrial data loggers for applications including oil and natural gas recovery and processing, monitoring temperature and pressure of steam and other factors in oil wells, biogas generation and conversion, water pressure, pumping efficiency, and more.

    By CAS DataLoggers based in Chesterland, OHIO (USA).

  • Premium

    Heat Transfer Equipment for Oleo Chemistry Industry

    Decades of experience in chemical engineering pays off. By using GIG Karasek technology our customers can produce high-quality products from various materials according to the most different industrial requirements. The environmental compliance and the purity of the products are just as important criteria as the energy expenditure with which they are obtained. Hence it is no sheer incident that our plants excel by innovative systems for energy recovery as well as sophisticated process combinations – with a...

    By GIG Karasek GmbH based in Gloggnitz, AUSTRIA.

  • Premium

    On-site chlorine and sodium hypochlorite generation systems for Oil and gas industry

    Klorigen™ systems safely generate the chlorine gas and/or high strength (up to 15%) sodium hypochlorite that is typically used to control biological fouling experienced in cooling water processes in the oil and gas industry. In addition to cooling water applications, Klorigen™ technology is well suited to other oil field applications which include hydrogen sulfide removal, enhanced oil recovery and frac water treatment. Onsite generation allows oil and gas applications to continue using their...

    By Electrolytic Technologies Systems LLC based in North Miami Beach, FLORIDA (USA).

  • High performance separation system for hydrotreating industry

    The key to optimizing a hydroprocessing unit is to maximize the life of the catalyst bed and increase energy efficiency of the furnaces. Our goal is to eliminate fouling of the catalyst bed by particles and aqueous fluids and the dissolved components within them as well as fouling of hydrogen recovery membranes and furnace-burner tips.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • Solutions for the in-situ soil remediation

    For over twenty years, BioSolve Pinkwater has been used for Surfactant Enhanced Remediation (SER) to mobilize and solubilize residual NAPL[i], facilitating its recovery and disposal. Depending on soil and plume characteristics, Pinkwater solution can reach contaminated zones through deep injection wells or be gravity fed from surface level injection galleries. After desorbing residual NAPL from soil surfaces on contact, Pinkwater then solubilizes the hydrocarbons in an aqueous emulsion, enabling extraction at...

    By The BioSolve Company based in Lexington, MASSACHUSETTS (USA).

  • Membrane Filtration for Wastewater Treatment

    The essential challenges of today are to ensure cost effective treatment and recycling processes for water and wastewater. Membrane technology solves this task by being an innovative and trendsetting technology. Today membranes are successfully used for the treatment of municipal and industrial wastewater as well as for the production of drinking and process water from surface water. Membrane technology and membrane bioreactors (MBR) are especially important in arid zones for the recovery of clean water for reuse...

    By MICRODYN-NADIR based in Wiesbaden, GERMANY.

  • Innovative Pump Technology for Ship Industry

    In shipbuilding, high standards of reliability as well as increasingly the energy efficiency of the systems are important prerequisites for the economical-technical overall evaluation in the technical procurement process. Ships as self-sufficient systems are particularly dependent on the reliable functioning of all installed components, including the pumps. They fulfil many tasks on board which are vital for the operation of the vessel: Delivery of ballast water and wastewater, boiler supply, condensate recovery,...

  • Applications and Air Pollutants Removed in the Metallurgical and Metal Finishing Industries

    From Aluminum to Zinc in the Metals Industry, Bionomic offers field proven extensive line of equipment and systems for; capturing acid gases, ammonia and alkaline mists from metal cleaning, treatment, etching and finishing operations including chemical milling. Acid and NOx emissions from pickling, anodizing, chemical milling and precious metals dissolving operations. Systems for HCL recovery from pickling lines, special scrubbing equipment and chemistries for NOx removal. Zinc galvanizing and electrogalvanizing...

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Acid Regeneration Process

    Acid Regeneration Process The commercially most relevant field of application for HCl regeneration processes is the recovery of HCl from waste pickle liquors from carbon steel pickling lines. Other applications include the production of metal oxides such as, but not limited, to Al2O3 and MgO as well as rare earth oxides by pyrohydrolysis of aqueous metal chloride or rare earth chloride solutions. A number of different process routes are available. The most widely used is based on pyrohydrolysis and adiabatic...

    By Insheng Engineering Co., Ltd based in Pingtung, TAIWAN.

  • Coastal & Nearshore

    Coastal & Nearshore For coastal and nearshore use DESMI provides the well known Ro-Boom product but in smaller sizes whilst maintaining the integrity of the larger product offerings. Alternatively, you may want to consider SPI or a lighter weight boom if there are deployment and recovery considerations or restrictions. Under these circumstances, the Troilboom AF (Air Filled) offers a light weight rapid response solution. It is manufactured as standard in bright orange polyurethane fabric offering durability and...

    By DESMI A/S based in Noerresundby, DENMARK.

  • Real-time In-situ Effluent Monitoring

    The UviLux BOD Indicator enables in-situ, real-time, reporting of BOD within both natural water systems and water processing plants. The monitor detects fluorescent proteins that are inherent within sewage and slurry and provides an output in BOD equivalent units. The principle behind the measurement is the excitation of Tryptophan-like fluorescence within UV wavelength band, which has been shown to correlate with both BOD and bacterial contamination. With complete flexibility of deployment methodology, the...

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you