Only show results available in Virginia? Ok

recyclable plastic waste Applications

  • Premium

    Products for plastics recycling

    Machines for the dimensional reduction, cleaning and separation of plastics from contaminants (ex. glass, wood, aggregates, etc.).

    By Guidetti S.r.l. based in Renazzo (FE), ITALY.

  • Plastic Bottle Recyclling

    By Anis Trend, d.o.o., based in Loški Potok, SLOVENIA.

  • Recycling Equipment for Plastic Waste

    Optimizing output in terms of economic value against the lowest possible costs per tonne. This is the short-term goal for every installation that Bollegraaf provides. The long-term goal is to ensure permanently low operating costs and achieve an optimal return on investment.

    By Bollegraaf Recycling Solutions based in Appingedam, NETHERLANDS.

  • Premium

    Plastic shredding for the plastic recycling industry

    Plastic materials mainly consist of crude oil and are therefore in demand for environmentally friendly recy-cling processes for the conservation of resources. In order to live up to the numerous applications and indi-vidual expectations of our customers, LINDNER reSource fully concentrates on processing of plastic materials in the Lindner group of companies.

    By Lindner-Recyclingtech GmbH based in Spittal/Drau, AUSTRIA.

  • Premium

    Recycling of plastic waste

    Recyclable plastics can come from a large range of sources. Shredder residues containing plastics are typically coming from small domestic appliances, electrical and electronic equipment and cars. These materials each have their own difficulties when they have to be processed to recover clean plastics. With the GRS equipment we are able to handle each type of these materials.

    By AD REM N.V. (Valtech Group) based in Menen, BELGIUM.

  • Premium

    Automobile plastic shredding for the special waste recycling industry

    Shredding plants for plastics from automobile industry as well as injection-moulded parts.

    By Erdwich Zerkleinerungssysteme GmbH based in Kaufering, GERMANY.

  • Binding device for plastic recyclers

    We offer balers with great compression force and an additional binding device for cross-binding. It can bale PET packaging of up to 110 x 77 x 120–150 cm in size and weighing 400–500 kg. It will enable the loading of more than 22 tons into a 40`` container.

    By Anis Trend, d.o.o., based in Loški Potok, SLOVENIA.

  • Premium

    Waste Compaction for the PET & Plastic Bottles Industry

    PET and other rigid plastics are usually made from either PET, high density polyethylene (HDPE), polypropylene (PP) or polystyrene (PS) – the hard, not expanded type. Recovered items such as bottles, pots and containers can all be baled sold on to recycling companies. If you’re unsure which type of plastic waste your business generates, we can help you identify it and recommend the best solution for your needs.

    HSM provides balers for use with plastics in many different scenarios from small volumes, with the aim of creating a tidy, efficient work area is the main aim through to demanding, high volume situations where a baler which can deal easily with throughputs of many bales per hour is required.

    Our new generation of modern balers have been created to use low levels of energy, generate a minimum level of noise and operate without the need for constant supervision.

    By HSM GmbH + Co. KG based in Frickingen, GERMANY.

  • Continuous process waste plastic to oil recycling

    continuous waste plastic to oil Solution: Continuous pyrolysis plant Function: Recycling waste plastic to fuel oil Applicable raw material: ABS / Mixed plastic, PE/PP/PS Plastic, PET Plastic not recommended Output: 50-90% fuel oil ,10-50% carbon blakc Heating fuel: Coal / wood/ fuel oil / gas Pyrolysis plant land size: 25x20m Reactor design: Mutiple reactors with internal rotating Reactor material: Q245/ Q345 Boiler plate

  • Premium

    Waste Sorting - Single Stream Recycling

    Single stream, otherwise known as dry commingled waste, comprises mostly of paper & card, plastic packaging waste, textiles and cans. Given that some collection schemes include glass whilst others exclude glass from commingled collection, we have provided figures for both waste types.

    By TOMRA Sorting (TITECH) based in Mülheim-Kärlich, GERMANY.

  • Dewatering and water purification for plastic recycling industry

    The preparation of plastic waste is an important process both for protection of raw materials as well as for reduction of waste. In this context, BELLMER KUFFERATH systems can be applied for all kinds of operations containing wet preparation processes.

    By BELLMER KUFFERATH Machinery GmbH based in Düren, GERMANY.

  • Premium

    Crushing of synthetic materials and plastics with Mercodor crushing systems

    The Mercodor crushers with their robust and compact cutting heads offer the correct solution for any work. The robust construction of our crushing equipment and the practically maintenance-free operation with a high level of effectiveness accompanied by low energy consumption are distinguishing our crushers.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Classification and identification of recyclable material

    This level is expected to reach over 4 million tons by 2010. Companies that specialize in recycling carpet require a fast, reliable and accurate means of identifying the carpet face fiber type entering recycling streams. Collection of plastics for recycling is increasing rapidly. Plastic recycling faces one huge problem, plastic types must not be mixed for recycling. Even a small amount of the wrong type of plastic can ruin the melt. Whether it is a carpet or plastic, classification and identification of recyclable material can be achieved using Bruker Optics` state of the art spectrometer systems. Bruker Optics has applied the FT-NIR technology and experience to this demanding requirement, and offers the Carpet Analyzer as a dedicated solution for the recycling industry.

    By Bruker Corporation based in Billerica, MASSACHUSETTS (USA).

  • Waste shredding for the waste RDF line

    Waste of all kinds is now considered a potential energy source and an important growth market for stationary shredder technology. Most plastic and paper waste RDF (refuse-derived fuel) plants have specific requirements regarding shredding capacity, grain size and operating reliability to ensure reliable and consistent production. Because of its ability to conform to the most stringent guidelines, Metso shredder equipment is increasingly in demand by this sector.

    By Metso Recycling Equipment based in Duesseldorf, GERMANY.

  • Premium

    Waste Compaction for the Plastic Packaging Film Industry

    Normal, clear or coloured packaging film is usually made from polyethylene (PE) and is the most widely recycled plastics material. Recovered waste material such as film, bags, sacks and pallet wrap, can all be baled sold on to recycling companies. If you’re unsure which type of plastic waste your business generates, we can help you identify it and recommend the best solution for your needs.

    HSM provides balers for use with plastics in many different scenarios from small volumes, with the aim of creating a tidy, efficient work area is the main aim through to demanding, high volume situations where a baler which can deal easily with throughputs of many bales per hour is required.

    Our new generation of modern balers have been created to use low levels of energy, generate a minimum level of noise and operate without the need for constant supervision.

    By HSM GmbH + Co. KG based in Frickingen, GERMANY.

  • Premium

    Automobile injection-moulded shredding for the special waste recycling industry

    Shredding plants for plastics from automobile industry as well as injection-moulded parts.

    By Erdwich Zerkleinerungssysteme GmbH based in Kaufering, GERMANY.

  • Premium

    Reliable Shredding Technology for Hospital Waste

    Our shredding machines are perfectly suited for the chemically aggressive material in your hospital waste. After the shredding process, the material can be optimally utilised thermally or disposed of together with municipal solid waste once it has been sterilised. The shredding is so effective that the granulate does not give any indications of the source material. Hospital waste consists of very different types of waste and requires special treatment during disposal due to the presence of infectious and highly contaminated materials. Depending on the waste type or classification, the hospital itself might need to specially treat the waste or store it in dedicated plastic containers or drums on-site.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Processing of LCD screens

    The safe extraction of valuable raw materials: robots automatically dismantle monitors containing mercury, while protecting workers’ health at the same time. According to initial projections, around three million LCD screens will be recycled in Germany in 2016. However, their backlighting system often contains mercury, which means they are classified as 'hazardous waste' in accordance with the EWC, and as 'Collection Group 3' in accordance with the Electrical and Electronic Appliance Law. They also contain valuable raw materials, such as metals and plastics, which have to be recovered in such a way, that the environment is not harmed. However, recycling specialists, Erdwich Zerkleinerungssysteme GmbH, have now developed an alternative: The company from Kaufering has developed an automatic processing system that enables mercury and other valuable raw materials to be easily extracted and recycled in an environmentally-friendly way.

    By Erdwich Zerkleinerungssysteme GmbH based in Kaufering, GERMANY.

  • Premium

    Recycling Systems for the recovery of secondary materials

    The recovery and reclamation of recyclable materials in the waste stream is possible through various selection and separation processes.In the case of materials such as PP, PET, HDPE, plastic, paper, aluminium etc. can be put back into circulation creating new raw materials, the so called “secondary” raw materials, produced not by nature but by man.

    By Macpresse Europa S.R.L based in Vernate, ITALY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you