Only show results available in Virginia? Ok

recycling equipment Applications

  • Premium

    Recycling equipments for tyre recycling

    Used tyres are among the largest and most problematic sources of waste today, due to the large volume produced and their durability. The same characteristics which make waste tyres a waste problem also make them one of the most re-used waste materials. Recycled tyre chips can be used for TDF (Tyre Derived Fuel) which is a fuel used for heat plants and cement ovens or for equestrian (i.e. rubber mixed with sand or sawdust used in the horse industry as ground in the stable or at the tracks). Rubber granulate is reused in e.g. sports fields, artificial turfs, rubber mats and moulded products. Rubber powder can be reused in rubber paved asphalt. The recovered steel can be smelted and reused just like non-recovered steel. Finally, the liberated textile has a very high effective burning value and can therefore be mixed with other materials in order to increase that material’s effective burning value. Read more: http://eldan-recycling.com/en/tyre-recycling

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Recycling equipments for electronic waste recycling (WEEE)

    The content of WEEE (electrical and electronic waste) gives recyclers various initiatives for recycling. It contains hazardous substances, such as lead, mercury or certain flame retardants, as well as precious metals like gold and silver. In 2012 approx. 64,900.000 ton electronic goods where produced and 49.000.000 ton electrical and electronic waste (WEEE) was generated. As the amount of sold electronic goods rise, the amount of WEEE rises. It is vital that this waste is taken care of properly.

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Recycling equipments for cable recycling

    Eldan Recycling has been active within cable recycling close to 60 years. What started with cable cutters, has expanded into including cable strippers, alligator shears and ACSR shears as well as machines and complete plants for processing of cables. Since copper and aluminium is 100% recyclable without loss of quality recycling of cable has always been a popular field.

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Recycling equipments for refrigerator recycling

    The Eldan refrigerator recycling plant is designed for processing refrigerators operating with CFC/pentane gasses in order to prevent harmful substances to evaporate into the atmosphere and to achieve the most efficient recycling of the solid materials. A complete refrigerator recycling system includes everything from pre-chopping to separation of the material.

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Recycling equipments for aluminium recycling

    Aluminium items are eminently suited to recycle. Did you know that aluminium can be recycled infinitely without losing quality? Recycling aluminium beverage cans saves 95% of the energy used making an aluminium can, compared to making it from raw bauxite. The energy saved from recycling one aluminium Coca Cola can will run a TV for three hours. If not recycled, it takes 80-100 years for an aluminium can to break down in a landfill.

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Recycling equipments for tire shredding and recycling

    Granutech Saturn Systems offers a complete line of tire shredding, granulating and powderizing equipment designed to process scrap tires for recycling and repurposing. With over 40 years of experience developing machinery to provide high quality rubber from scrap tires, Granutech Tire Shredders provide cost-effective options for shredding tires, separating rubber from steel and generating granulated or powderized rubber for recycling operations. Our staff has decades of experience in the scrap tire industry, and we’ll make sure that the equipment we provide you will meet your specific recycling requirements.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Recycling Equipment for De-Inking Waste

    Optimizing output in terms of economic value against the lowest possible costs per tonne. This is the short-term goal for every installation that Bollegraaf provides. The long-term goal is to ensure permanently low operating costs and achieve an optimal return on investment.  The better the separation, the higher the value of the output. This is the very essence of our paper & cardboard processing equipment: to increase the quality of the end product. At Bollegraaf, we build and provide high-end turnkey installations that combine a range of effective separation technologies that will improve the quality of the output and its intrinsic value. This will substantially reduce de-inking costs for your clients, the paper mills.

    By Bollegraaf Recycling Solutions based in Appingedam, NETHERLANDS.

  • Recycling Equipment for Single Stream Waste

    Optimising output in terms of economic value and against the lowest possible costs per tonne. This is the short-term goal for every Single Stream installation that we provide in cooperation with Bollegraaf. The long-term goal is to ensure permanently low operating costs. The result: fast Return on Investment.

    By Bollegraaf Recycling Solutions based in Appingedam, NETHERLANDS.

  • Recycling Equipment for Municipal Solid Waste

    Optimizing output in terms of economic value against the lowest possible costs per tonne. This is the short-term goal for every installation that Bollegraaf provides. The long-term goal is to ensure permanently low operatingcosts and achieve an optimal return on investment.

    By Bollegraaf Recycling Solutions based in Appingedam, NETHERLANDS.

  • Recycling Equipment for Screening Solutions

    Environmental requirements and an ever-increasing demand for accurate screening require versatile and reliable mobile screening machines. Lubo`s mobile screening solutions are especially designed for that purpose; They have a high processing capacity, deliver a high percentage of `clean` output materials, and  are suitable for practically all work sites, including the smaller ones. making them one of the most compact and reliable mobile screening machines available on the market today.

    By Bollegraaf Recycling Solutions based in Appingedam, NETHERLANDS.

  • Premium

    Recycling equipments for shredder light fraction (SLF) recycling

    Dismantled ELVs (End of Life Vehicles) are sold to shredder operators and are reduced to fist-size pieces by large rotating hammer mills. The Shredder Light Fraction (SLF) is removed from the stream by suction, the intensity of which determines the amount and composition of the SLF. SLF consists essentially of plastics/rubber (~60%), Glass/sand i.e. mineral substances (~15%), Textiles/leather/wood (~10%), Paint dust/rust (~10%) and Residual metals (~5%). Other names for SLF are ASR (Automobile Shredder Residue) and Auto fluff or just fluff.

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Shredding of swarf recycling with Mercodor equipment

    For the optimal processing and reduction of steel and stainless steel chips, cast, aluminium, copper, brass, titanium and precious metal turnings, for instance, Mercodor, with its rugged, compact precision cutters has the right solution for each and every task.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Recycling Equipment for Confidential Shredding Industry

    Confidential Archive Shredding Solutions; Optimizing output in terms of economic value against the lowest possible costs per tonne. This is the short-term goal for ervery installation that Bollegraaf provides. The long-term goal is to ensure permanently low operating costs and achieve an optimal return on investment. Significant savings can be achieved at many offices by freeing up valuable office space that is occupied by filling cabinets or boxes full of documents. However, when it comes to classified and confidential documents, out of sight doesn`t necessarily mean out of mind. That`s why at Bollegraaf we invest a lot of time into offering products and installations that meet the required legal standards for the destruction of such confidentail documents. The result of this effort: your peace of mind.

    By Bollegraaf Recycling Solutions based in Appingedam, NETHERLANDS.

  • Premium

    Recycling equipment for waste-to-energy recycling

    Granutech has products that are well suited to process materials with the ultimate goal of producing energy from waste.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Recycling equipments for municipal solid waste (MSW) recycling

    During recent year it has become increasingly evident that an alternative energy sources has to be explored. RDF (Residual Derived Fuel) uses the energy content of the traditional household waste in order to substitute fuel. The production of RDF is the optimum solution both environmentally and economically. To optimize the process, it is important to reduce the waste volume into a homogeneous fraction size of e.g.

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Recycling equipment for industrial rubber shredding & recycling

    Granutech Saturn Systems has over 40 years’ experience designing and manufacturing world-class shredders for industrial rubber scrap. We have consistently been in the forefront of developing machinery to provide high quality rubber crumb from rubber and tire scrap. Whether your application is processing remainders from rubber molding, shredding rubber scrap or shredding tires, we have the expertise to design a custom solution that meets your exact application and processing requirements.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Recycling equipments for shredding scrap metals

    Scrap metal includes metals that can be reclaimed for use in manufacturing, processed for re-melting or prepared for disposal in landfills. These metals include industrial scrap metal and remainders, electronic scrap, aluminum and precious metals. Shredders prepare the metals for bailing and bundling, saving storage space, transportation and disposal costs. Quad shaft shredders reduce and separate electronic scrap and prototypes in one process, allowing for the recovery of precious metals. Dual or quad shaft shredders break bales or briquettes of pre-processed metal scrap for final size reduction and separation for reclamation or re-melting, allowing for recovery and reuse of the metals. Integrated systems include grinders and hammer mills for producing small size or powdered materials for reuse.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Recycling equipments for ferrous scrap metal shredding & recycling

    Ferrous scrap metal includes metals that can be reclaimed for use through traditional ferrous scrap recovery systems. These metals include a wide variety of light ferrous scrap such as sheet steel, 55 gallon drums, white goods, and other forms of loose tin. Heavier ferrous scrap can be processed through the Saturn hammermill line of shredders which also produce a more consistent, higher density shred. Shredders prepare the metals for further separation or directly to end ferrous scrap consumers. Additional Granutech machinery such as the MAC Magnum Logger, or MAC Big MAC auto crusher can compact and densify larger ferrous items reducing transportation costs.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Recycling equipments for shredding hazardous waste

    The disposal of hazardous waste requires special handling to ensure that safety and regulatory requirements are met. Preparing the waste for incineration or burial requires equipment that is durable and reliable so that the materials are processed safely and in accordance with the regulatory requirements.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Recycling equipments for non-ferrous scrap metal shredding & recycling

    Non-Ferrous Metal Recycling is a large industry focusing on the recovery of metals such as aluminum, brass, copper, and even precious metals from electronic scrap. The applications and needs of non ferrous metal recyclers vary greatly. These can include a large corporate recycler buying UBC bales for shredding to be converted back into beverage cans or a small recycler who is recovering precious metals from circuit boards or catalytic converters.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you