recycling sorting Applications
-
-
PremiumRecycling sorting solutions for the ash recycling
Incinerated municipal solids and other waste streams results in a significant amount of ash residue, which often contains valuable metals. The amount of this remnant being created globally is rapidly increasing due to legislation which prohibits landfilling and creates new incentives for incineration. TOMRA Sorting sensor-based systems allow waste management businesses to capitalize on today’s challenges whilst simultaneously enabling them to look to the future with confidence.
By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.
-
PremiumRecycling sorting solutions for the fines copper
Copper granulate, recovered by the recycling process of copper wires and cables, has the potential to be a high value resource. However, even after the removal of impurities, polymers and ferrous from the granulate, it can still contain small amounts of lead, brass or aluminum – often up to three percent. TOMRA sorting technology removes the remaining pollutants efficiently and automatically from the copper granulate – with an especially high efficiency of lead removal.
By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.
PremiumMetal sorting for the metal recycling industry
Metals can be identified according to the colour, nature of the metal and of elemental composition.
By REDWAVE a division of BT-Wolfgang Binder GmbH based in Gleisdorf, AUSTRIA.
PremiumRecycling sorting solutions for the wire recovery
Previously, cable and wire materials were often lost in the treatment and sorting process, resulting in a financial loss due to the high proportion of copper they contain. TOMRA sorting technologies are capable of detecting these wires, transferring them to a metal product and then finally sorting them in a further step into a cable fraction of outstanding purity.
By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.
PremiumRecycling sorting solutions for the electronic scrap sorting - weee
The growing demand for high-value, secondary raw materials makes targeted recycling increasingly attractive. In the EU alone, experts estimated over 8 million tons of disused electrical equipment in 2010. TOMRA Sorting’s goal is to utilize electronic scrap sorting to sort out pollutants as well as high-purity components.
By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.
PremiumWaste sorting solutions for the single stream recycling
Single stream recycling, otherwise known as dry commingled waste, comprises primarily of paper and cardboard, plastic packaging waste, textiles, cans and, in some cases, glass. The demand for these secondary resources continues to rise compared with that of primary resources.
By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.
PremiumGlass sorting for the glass recycling industry
Elimination of contaminants; Ceramics, stones, porcelain, Metal, Glass ceramic (heat resistant glass), Leaded glass, Organic impurities, Plastics, Cork, Paper. Sorting and recovery of; White glass, Green glass, Brown glass, Other colors and combinations of colours.
By REDWAVE a division of BT-Wolfgang Binder GmbH based in Gleisdorf, AUSTRIA.
Metal sorting for the metal recycling industry
By Metso Recycling Equipment based in Duesseldorf, GERMANY.
PremiumWaste sorting solutions for the organic waste
The total waste volume contains a high percentage of organic waste material. Depending on the origin country, this fraction is treated in different ways. Within the organic fraction, the inert material can cause significant problems during the different treatment processes.
By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.
PremiumWaste sorting solutions for the bulky waste
Bulky waste sorting can produce a high number of valuable materials. The accessibility of these materials, however, is challenging due to its cumbersome nature.
By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.
PremiumOptical Sorting Machines for single stream
Irrespective of the used collection system and the corresponding task, we design systems that grant 100% efficiency. Various countries have different waste collection systems, resulting in different tasks for the sorting technology. For example, packaging waste mainly consists of plastics, paper and glass. Single-stream waste mainly consists of dry, mixed waste (paper, cardboard, films, plastics, metals, aluminium, and in many cases also glass). Heavy, mixed waste often also contains bulky materials etc. The...
By REDWAVE a division of BT-Wolfgang Binder GmbH based in Gleisdorf, AUSTRIA.
PremiumWaste sorting solutions for the packaging industry
Packaging waste is mostly made up of different polymers, beverage cartons, paper and glass. Depending on the country in question, different collection systems apply and the material will invariably arrive in different conditions to the MRF’s (Materials Recovery Facility).
By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.
PremiumRecycling sorting solutions for the zorba - shredded non-ferrous metals
The value of Zorba – shredded non-ferrous metals originating from end-of-life vehicles or WEEE – continues to increase, as the demand for copper, nickel and brass created by modern lifestyles is on the rise. TOMRA’s sensor-based sorting technology can double the value of Zorba.
By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.
PremiumRecycling sorting solutions for the wood industry
TOMRA Sorting can help you sort the contaminants out of wood.
By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.
PremiumRecycling sorting solutions for the non-ferrous metals - post shredder
The widespread use of electronic products has created an enormous demand for the sorting of non-ferrous metals such as copper and aluminum. To be usable, these non-ferrous metal fractions must be treated to a high degree of purity. Thanks to TOMRA’s efficient sorting technology, separating these materials from metal waste makes is worthwhile in every aspect.
By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.
PremiumWaste sorting solutions for the commercial & industrial waste
Commercial and Industrial (C&I) waste sorting separates many elements, such as plastics, paper, cardboard, and film - all of which can be effectively recycled into saleable products.
By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.
PremiumWaste sorting solutions for the refuse derived fuel
One way in which valuables within waste can be utilized is by using it as fuel. Refuse derived fuel (RDF) is a term that applies to materials with a high calorific value (typically around 18 Mega joule per kilogram) that are removed from waste streams. Beneficiaries of this material are cement kilns to power plants.
By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.
PremiumRecycling sorting solutions for the end-of-life vehicle scrap - shredder
The growing demand for high-value, secondary raw materials renders targeted recycling increasingly attractive. Modern TOMRA Sorting technology generates clean non-ferrous metal fractions in customer shredder operations and results in valuable scrap metal gains.
By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.
PremiumOptical sorting machines for electronic scrap (WEEE) industry
Recovery of recyclables from Waste Electrical and Electronic Equipment (WEEE): Metals and alloys. Plastics (thermoplastics, plexiglass, etc.). Composite materials (circuit boards, etc.). Brominated plastics (BFR). Plastics with cadmium compounds. Material tainted with precious or recoverable metals (e.g. copper, brass, silver, etc.). Sorting of monitor glass (CRT), etc.
By REDWAVE a division of BT-Wolfgang Binder GmbH based in Gleisdorf, AUSTRIA.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you
