Only show results available in Virginia? Ok

refinery process monitor Applications

  • Refineries & Refinery Emissions Monitoring & Analysis

    Procal supplies the oil refining industry with both process and emission monitoring analysers to meet a wide range of applications.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

  • Moisture Monitoring for Refinery Recycle Gas & Plant Start-up

    Optimal performance of petrochemical reforming catalysts depends upon maintaining an optimal moisture / chloride ratio within the reforming reactor. When moisture and chloride are out of balance, catalysts suffer from higher deactivation rates and decreased yields. The cost of inadequately controlling the moisture / chloride ratio can be very high in terms of yield losses, off-spec product, increased catalyst regeneration , early catalyst replacement , processing upsets and / or increased downtime.

    By Moisture Control & Measurement Ltd based in Wetherby, UNITED KINGDOM.

  • Water discharge monitoring for retention tanks

    Leakwise detects oil buildup in retention tanks at the end of the treatment process and prevents the discharge of oily water into the environment.

    By GE Analytical Instruments based in Boulder, COLORADO (USA).

  • Cetane Number of Diesel Fuels #3010

    The Cetane number of a diesel fuel is a measure of the ignition properties and is an important specification that must be met during fuel production. The traditional laboratory method for Cetane number determination is the knock engine method in which the fuel is burned and its combustion characteristics compared to known standards. This method is time and labor intensive, and provides no ability for real time control of production. This note discusses the use of Guided Wave hardware and software tools for the measurement of Cetane number in diesel fuel using fiber optic-based, Near-Infrared (NIR) spectroscopy. NIR is applied in real-time directly in process monitoring or as a laboratory procedure. In either case NIR is a time and money saving alternative to traditional methods.

    By Guided Wave Inc, based in Rancho Cordova, CALIFORNIA (USA).

  • Hydroxyl Number in Polyols (OH#) #3013

    The use of polymeric polyols is commonplace in the manufacturing of polyurethanes and other specialty polymers. The hydroxyl number (OH#) is a measure of the concentration of the hydroxyl groups on the polyol. This is an important parameter to monitor and control during polyol production. The laboratory method that is commonplace for hydroxyl number determination is both time consuming and involves the use of hazardous materials. This note will discuss the use of Guided Wave hardware and software tools for the measurement of hydroxyl number in polyols using fiber optic-based, Near-Infrared (NIR) spectroscopy. NIR can be applied in real time directly in process or as a laboratory procedure. In either case NIR is a time and money saving alternative to traditional methods. NIR also offers the benefit of increased safety over traditional methods. For well established process measurements, a Guided Wave ClearView® db multi-wavelength photometer can be used to achieve similar results.

    By Guided Wave Inc, based in Rancho Cordova, CALIFORNIA (USA).

  • Percent Aromatics in Gasoline #3008

    The aromatic content of gasoline determines many of its combustion properties. Since it also impacts the environmental characteristics of the fuel it is desirable to have accurate measurements of this parameter. The traditional analytical method for measuring aromatics is either gas chromatography (GC) or an older method entitled fluorescent indicator adsorption (FIA), both of which are time and labor intensive. This note will discuss the use of Guided Wave hardware and software tools for the measurement of % aromatics in fuel products using fiber optic-based, Near-Infrared (NIR) spectroscopy. NIR can be applied in real time directly in process monitoring or as a laboratory procedure. In either case NIR is a time and money saving alternative to traditional methods. Request Application Note #3008

    By Guided Wave Inc, based in Rancho Cordova, CALIFORNIA (USA).

  • Octane Number of Gasoline using NIR Spectroscopy #3012

    When every second counts and performance is on the line Guided Wave's NIR analyzers allow for easy measurement of octane numbers in gasoline and refinery production units using fiber optic -based, near-infrared (NIR) spectroscopy. *Fast and reliable measurement of the octane number of gasoline (RON & MON). * Control gasoline production in real-time directly with in process monitoring. * Certify gasoline meets specification before release. *Gain significant improvements in process control. *Minimize the need for laboratory sample collection and the labor intensive "knock engine" method. The measurement of the octane number of gasoline using NIR spectroscopy is both fast and reliable utilizing Guided Wave analyzers. Results are available in real-time (seconds) for multiple parameters in complex streams. Request Application Note #3012

    By Guided Wave Inc, based in Rancho Cordova, CALIFORNIA (USA).

  • Premium

    Flow meters solutions for petrochemical sector

    Our flow meters are used throughout the oil patch, from monitoring injection at the wellhead and measuring natural gas for heaters and boilers to measuring the various process gases at the refinery or flared in the field.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Flow meters solutions for oil & gas sector

    Our flow meters are used throughout the oil patch, from monitoring injection at the wellhead and measuring natural gas for heaters and boilers to measuring the various process gases at the refinery or flared in the field.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Raman Spectrometry for the Oil & Gas Industry

    Increasing regulations and specifications for fuel quality, compliance and the need to detect calamities as quickly as possible underlined the importance of on-line analyzers. Since more than 10 years AppliTek has acquired a considerable expertise in the advice, design and implementation of on-line analyzers and complete monitoring systems in the oil and gas sectors. These systems are built by specialists with a proven track record in oil processing and refining and know where your expectations lie. A growing portfolio of products and turnkey solutions is your key to higher production efficiency, cost control and finally your competitive advantage.

    New technologies such as Raman spectrometry pave the way to new monitoring systems for quality control and process control.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Gas detection analyzers for semiconductor industry

    Semiconductor manufacturing facilities employ a number of hazardous gases in their production processes. Whenever these gases are stored, distributed or used in manufacturing processes, there exists the potential for a hazardous condition. The primary hazards associated with these gases include fire, explosion, and contamination resulting in product loss or unscheduled preventative maintenance. These gases must be continuously monitored to ensure the health and safety of employees, to protect property, as well as to maintain regulatory compliance. Continuous gas monitoring in semiconductor facilities is a requirement of local and state regulations.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Air and particule sampling for the oil and gas industries

    Ormantine offers a wide range of products and services to meet the array of different needs that arise in the oil and gas industries. Volatile Organic Compounds (VOCs), benzene, and other compounds are released during drilling, hydraulic fracturing (fracking) and other extraction procedures. Monitor NOx emissions from heavy duty equipment, particulate matter, and ground level ozone, the formation of which is contributed to by VOCs from processing, transportation, and storage of oil and gas.

    By Ormantine USA Ltd., Inc. based in Palm Bay, FLORIDA (USA).

  • Premium

    Flare gas measurement flow for solutions

    Our flow meters are used throughout the oil patch, from monitoring injection at the wellhead and measuring natural gas for heaters and boilers to measuring the various process gases at the refinery or flared in the field.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you