Only show results available in Virginia? Ok

refinery waste Applications

  • Active Refinery Remediation

    Waste Management Unit (WMU) closures at this active refinery Waste Management Unit (WMU) closures at this active refinery - Installation of several soil, Liquid Boot, and full multi-layer geocomposite cover systems in various facility locations- - Sensitive construction practices including large scale activities near power lines, 30 inch raw water line, and several active emergency flares - Completed performance based in-situ solidification/stabilization, cap and closure, using ENTACT owned large diameter auger Delmag rig and custom-fabricated Geodrill - COC`s include heavy metals, PAH, volatile organic compounds, and petroleum hydrocarbons Performance criteria include an unconfined compressive strength of 10 psi, permeability coefficient of less than 2.1x10-6 cm/sec, and an admixture pH of less than 11.5 - ENTACT performed in-house treatability analysis to develop reagent admixture

    By ENTACT, LLC based in Grapevine, TEXAS (USA).

  • Biofiltration

    Biological Aerated Upflow Filtration (BAF) for high efficient Waste Water Treatment in Refinery Industry with more than 20 reference plants and more than 20 years of experience

    By AquaBiotec based in Paris, FRANCE.

  • Premium

    Oily Waste

    Wherever oil is produced, processed, transported or stored, our clients face large amounts of oily waste in many different forms. Our VacuDry® technology allows efficient and environmentally friendly treatment of all oily waste streams within a single plant. Due to the conditions under which the waste is treated (low temperature, vacuum and nitrogen blanketing), the recovered oil can then be reused after treatment. Find more information and the benefits of VacuDry® oily waste plants on http://www.econindustries.com/applications/oily-wastes

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium

    Mercury Waste

    Mercury-contaminated wastes are a major challenge for many industries including the chlorine industry, oil & gas drilling, oil & gas refineries (catalysts) and fluorescent lamps recycling. Due to strict legal restrictions and HSE requirements, mercury-contaminated waste is required to be handled with special care. We at econ industries have the best solution for each specific mercury waste stream, with plants that are recognised as being state of the art from approval authorities worldwide. Find more information an the benefits of VacuDry® mercury waste plants on http://www.econindustries.com/applications/mercury-wastes

    By econ industries GmbH based in Starnberg, GERMANY.

  • Waste Treatment for Polluted Sediment

    Recognised for the durability and longevity of its equipment, MENART is sought after by petroleum groups and other specialised companies.

    By Menart based in Dour, BELGIUM.

  • Premium

    NORM Waste

    Natural Occurring Radioactive Material consists of materials enriched with radioactive elements found in the environment. They are usually brought to the surface by oil and gas exploration or mining. NORM wastes can be treated in a VacuDry® unit in order to prepare it for a safe sub earth disposal. Find more information, important key facts and the benefits of VacuDry® NORM waste plants on http://www.econindustries.com/applications/norm-waste

    By econ industries GmbH based in Starnberg, GERMANY.

  • RTO (Chemical) Industries Waste, Paint, Wood chip and

    Our company Honeycombs Ceramics B.V. supports installations used for RTO (Regenerative Thermal Oxidizer). These gas (waste) installations use ceramic beds of blocks to cool released hot gasses. This is one of the most important processes within the installation. Honeycombs Ceramics B.V. is established in Europe and China. This global connection makes us unique, it takes one contact to make RTO business a low-cost and durable business. Our lines are short, we are always available, and both countries have sales offices and warehousing. Core feature: Efficiency. The way you do business with RTO providers can be converted to a more simple, safe and secure way. By giving you the opportunity to choose how, when and where. Our companies in the Netherlands and China have professional sales teams. And their goal is to assist you. You can decide which office to contact. 24/7. Our production in China is under strict policy of quality control. We have inspectors in China and the Netherlands who both follow strict instructions to meet our high standards. These standards are measured and recorded by SGS every year. Pricewise we offer high quality for low pricing. Next to quality, there is warehousing. Our warehousing is extensive, with supervision of quality- and logistic managers. Also, there is the opportunity to keep stock in both countries. We understand the importance of availability when needed. Whether this is emergency, temporary, or for quantities based on a turn around. Based on all input from customers and opportunities in RTO business, we innovate and make possibilities work. In short; no fuss, that's us.

    By Honeycombs Ceramics BV based in Sassenheim, NETHERLANDS.

  • Premium

    Hazardous waste treatment solutions for oil and gas industry

    There are a wide amount of applications for our VacuDry® process within the oil and gas industry. A large variety of wastes and by-products that are generated in the oil & gas production chain can be treated effectively and sustainably. In past decades, numerous thermal desorption processes have been implemented worldwide, using a variety of heating chamber designs to separate hydrocarbons from the mineral solids. Such standard TDUs work under atmospheric pressure which can lead to safety risks, high energy consumption, larger emissions and limited flexibility regarding altering feed materials. Due to its unique design, the complications outlined above are avoided throughout the VacuDry® process. When it comes to treating standard oily wastes, mercury-containing waste streams, NORM, and especially for the recovery of highly valuable drilling fluids from drill cuttings; our vacuum thermal desorption process (i.e. vacuum distillation) is economically unbeatable.

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium

    Product and services for industrial - refineres industry

    For industrial customers, we offer cost-effective and environmentally attractive alternatives to oxidize, precipitate, segregate and remove unwanted pollutants, contaminants and by-products from waste streams and industrial processes. Whether using our time-proven CAIROX®, AQUOX®, and LIQUOX® permanganate-based products, our manganese based CARULITE® catalyst, or any of our other newly developed technologies, our long history and unmatched experience and environmentally friendly expertise provides customer specific solutions to many diverse industries.

    By Carus Corporation based in Peru, ILLINOIS (USA).

  • Pumping solutions for fuel (waste)

    Fluids Handled - Petroleum Refining, Blending and Transporting.

    By Hydro Prokav Pumps (India) Pvt. Ltd. based in Sidco, INDIA.

  • Flares for Safe Disposal of Waste & Toxic Gases

    Our Flares are versatile in design & suitable for total destruction of waste gas/vapours. The waste gases/Vapours from petrochemical, WWTP, chemical plants have very high potential for environmental hazards. If allowed to released unburned into atmosphere. SIES offers flares and combustion systems for safe disposal of gases with high efficiency and reliability. System Designed to meet the API 521/537 norms High efficiency Burners with up to 99% thermal destruction Flares operable on fully automated, SCADA based solutions Customized & Cost effective project specific solutions Successful Installations of various types of flares at various locations.

  • Premium

    Fly Ash - Industrial Vacuum

    Fly Ash can cause many problems. The Vac-Con & Vector Pneumatic Vacuum systems can assist and solve many of these problems. Our high-performance vacuum systems are manufactured in three basic configurations: Truck mounted, Trailer mounted, and Fixed/static installed. Any of these systems can be integrated into the existing power plant design. All of our vacuum systems can be utilized to solve your plant’s fly ash removal/clean-up needs and can assist in many other maintenance projects. All can be tailored to fit into your power plant’s specific needs. Vac-Con Truck mounted Industrial vacuum systems are equipped with large storage debris tanks with self-cleaning intake filter systems. The Industrial Trucks vacuum the waste products through existing manifold piping or with hoses attached directly to the debris tank. When fully loaded, the truck can then drive directly to the disposal site and discharge the waste products. The Industrial Truck offers a great amount of flexibility of operation and can be utilized anywhere in your facility for many different types of normal and emergency maintenance operations. The Vac-Con Industrial Vacuum Truck can be utilized on both wet and dry materials. The same Vac-Con truck can be used for removing Fly Ash from your plant, coal from broken intake belt conveyors, or used to suck wet muddy material from storage lagoons. The Vector Trailer mounted Vacuum Systems are designed to be used in several locations around power plants. The Trailer mounted Vacuum Systems connect to Manifold piping located in key areas within your power plant. The Vacuum systems move the waste products from the plant and deposit these products into moveable storage containers. The loaded storage containers when full can then be moved to the disposal sites for discharge. Vector Static Mounted Vacuum systems are designed to vacuum and remove Fly Ash and other bulk waste products through manifold piping from operational areas of the plant and deposit these waste products into collection storage silos for later transport to disposal sites. The fixed vacuum systems are electric motor driven and are normally installed as a permanent addition to in-plant existing conveying systems. Please contact us with any requirements you may have. We will evaluate your request and respond with solutions specific to solve your problems and fit your needs.

    By Vac-Con, Inc. based in Green Cove Springs, FLORIDA (USA).

  • Petrochemicals, Waste Water Treatment, Gold Refinery, Gasification

    We like to introduce ourselves as leading manufacturers of granular activated carbon used in water and waste water treatment. We have modern plant to manufacture this product to Indian & International specification. We are an ISO9001-2008 company duly certified by BVQI. Over 70% of our production ( 3000 tpy) is being exported to Europe, US, Gulf countries, African countries, far east (Korea) & South America. Our clients include Calgon, Chemviron, Desotec, ESLI, HSC, CarboTech, ect. In India we are exclusive suppliers to Reliance Industries Ltd to their various refining complexes. We manufacture over twenty grades for various applications besides water and waste water treatment like in gold recovery, catalyst support, gas mask carbons, impregnated carbons, NBC carbons, condensate polishing carbon, etc. We request you to register our names for your requirement of activated carbon and send us your valued enquiries. Kindly visit us at www.gcarbon.com

    By Gowrishankar Chemicals Pvt Ltd based in Tumkur, INDIA.

  • Premium

    Industrial Solution for gasification & synthetic gas

    Gasification and synthetic gas production from various waste products are becoming increasingly important energy recovery technologies. Often, the synthetic gas contains various hazardous contaminants including H2S, HCl and other acids, heavy metals, and tars. The gas requires cleaning before it is introduced in the engine or boiler. Most of these processes generate significant concentration of tars. The tars can vary from very low molecular weight to large and complex chains.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Premium

    Ultraviolet Disinfection for Oil & Gas Applications

    The process of disinfecting water with UV light is a proven technology for drinking and process water in many industries, however the high standards required by the offshore industry commanded the disinfection systems to be engineered way beyond the normal specification of many manufacturers` As the market leader for offshore UV systems, atg UV technology UV systems are used in a number of key areas in the offshore industry:- atg UV has provided UV systems to treat drinking water, waste water, hydraulic stimulation fluids (well injection and unconventional gas fracking) and SRB reduction for pipeline hydrotesting and corrosian protection. These systems are often supplied as skid mounted duty/standby packages, or containerised solutions and are designed to individual client specifications. Clients include: Shell, BP, Total, Statoil, AKER, British Gas, Veolia, Halliburton, Baker Hughes, BJ Services, ODE, Ormandy, SLP and Petrobrass.

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Wilsa ElectroWaveTM - Oil Harvesting / Removal

    WILSA Harvests Oil from Tank Bottom Sludge at Disposal Well. ElectroWave™ Technology optimizes onsite processing and reduces costs associated with saltwater disposal operations by breaking waste emulsions and recovering additional oil.

    By Hudson Industries based in Vienna, OHIO (USA).

  • Dustless Lead Paint Removal & Nuclear Decon Tools for Power, Oil and Gas Industry

    Pipelines, large fuel storage tanks, transformer pads and countless power generating systems have been decontaminated and prepared for a fresh coat of paint in one step! There is no costly containment to setup before starting the job or additional cleanup after it’s done, because our shrouded power tools capture dust before it’s emitted. Our powerful HEPA vacuum deposits hazardous waste directly into a 55-gallon drum, safely sealed and ready for transport when full.

    By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).

  • Solutions for Safe disposal during Emergencies, leakages, Tank Cleaning operations

    For temporary installation of a are, needed for only a short time in one place to handle localized waste gas disposal problem. SIES offers skid-mounted Mobile Flares Units to allow mobility. Such types of systems are useful for Gas pipe line/ Gas distribution network within a large plant (Petrochemical & Refineries) & Landfills. SIES design & Supply Mobile Flare for Oil and Gas industry, Waste gases, LFG operations and tank Cleaning operations. The Flares have inbuilt capabilities to handle wide variety of gas with full safety and precaution as per API Standards..

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you